Tripp Lite SU3000RTXLCD3U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU3000RTXLCD3U

SmartOnline 3kVA On-Line Double-Conversion UPS, 3U Rackmount, Interactive LCD display,
100/110/120/127V NEMA outlets

Highlights

3000VA / 3kVA / 2700W on-line double-conversion 3U rackmount UPS

100/110/120/127V 50/60Hz output; High efficiency economy mode option

Interactive LCD with 9 selectable screens of UPS and site power data

Expandable runtime, Hot-swap batteries, 26 in / 66cm depth

USB, RS232 & EPO ports, support for SNMP/WEB card option

2 independently switched load banks

NEMA L5-30P input; 4 NEMA 5-15R, 4 5-15/20R & 1 L5-30R outlets

Description

Tripp Lite Smart Online UPS systems offer high performance power protection ideal for critical server and network equipment in datacenters,
computer rooms and network closets. Online, double-conversion Uninterruptible Power Supply (UPS) maintains perfectly regulated output power by
continuously converting raw AC input to DC, then re-converting output back to AC. Fully regulated sine wave AC output with +/-2% voltage regulation
powers network equipment continuously, even during severe brownouts and overvoltages, all without depleting UPS battery reserves. Maintains
battery-derived AC output during power failures with zero transfer time. Extended runtime options available. Interactive LCD interface reports UPS
operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Highly efficient operation in
optional economy mode saves BTU heat output and energy costs. Network management interfaces support communications via USB, RS-232,
contact-closure and optional SNMPWEBCARD network interface. Built-in DB9 port offers both enhanced RS-232 data and basic contact closure
monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and
Mac OS X. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. LED display reports UPS
operating mode, line power availability, battery mode operation, inverter operation, ECO mode status and output power availability. Audible alarm
with push-button momentary alarm-cancel and silent-mode LCD configuration options. Programmable self-test. Battery independent restart.
Fault-tolerant auto-bypass mode. Field-replaceable, hot-swappable internal batteries and external battery packs.

Package Includes

SU3000RTXLCD3U UPS System
PowerAlert Software with USB, Serial & EPO cabling
4 post rackmount installation kit
Instruction manual

Features

Tripp Lite SU3000RTXLCD3U 3000VA / 3kVA / 2700W on-line, double-conversion 3U rackmount UPS
Selectable 100/110/120/127V output (120V factory preset)
NEMA L5-30P input, 4 NEMA 5-15/20R, 4 5-15R & 1 L5-30R outlets
Two switched 4-outlet load banks support remote reboot or programmable load shedding options
Supports 2% output voltage regulation and zero transfer time in double conversion mode
Economy mode option offers enhanced efficiency, reduced power consumption and lower BTU emissions
11 minutes runtime at 50% load (1350W) and 4 minutes at 100% load (2700W) with internal batteries
BP72V15-2U (limit 1) or BP72V28RT3U (no limit) external battery packs available (some configurations require Tripp Lite's External Battery

Configuration Software)

LCD interface reports operating mode plus 9 selectable screens of UPS data (Load percentage, kW & kVA, Power factor, Input voltage &
frequency, Output voltage & frequency, Battery voltage and charge percentage, Minutes runtime, Capacity remaining and Kw/hr.
consumption)
LCD interface also supports 16 screens of UPS configuration and setup options

4 post installation hardware included, Optional 2POSTRMKITHD enables 2 post rack installation
Single line TEL / Network surge suppression
Electronic bypass maintains utility output during a variety of UPS fault conditions
Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries
are expired and require replacement
Frequency regulation / conversion mode offers generator-compatible frequency correction or conversion of frequency from 50 to 60Hz or 60
to 50Hz
Built-in USB, RS-232, contact-closure and optional SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

3000

Output kVA
capacity (kVA)

3

Output Watt
Capacity (watts)

2700

Output kW capacity 2.7

Output power
factor

0.9

Output Capacity
Details

ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120V 2700
watts / 115V 2430 watts / 110V 2295 watts / 100V 2160 watts). FREQUENCY REGULATION / CONVERSION MODE:
Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 1890 watts / 115V 1701
watts / 110V 1606 watts / 100V 1512 watts).

Crest Factor 3:1

Nominal Output
Voltage(s)
Supported

100V; 110V; 115V; 120V; 127V

Nominal Voltage
details

120V factory-default nominal voltage

Frequency
compatibility

50/60 Hz (auto-selectable); Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency
compatibility
details

ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output
matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds
+/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY
REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to
70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is
regulated to +/-0.05Hz.

Output voltage
regulation (line
mode)

+/- 2%

Output voltage
regulation
(Economy line
mode)

+/- 10%

Output voltage
regulation (Battery
mode)

+/- 3%

Built-in UPS
output receptacles

4 5-15R outlet(s); 4 5-15/20R outlet(s); 1 L5-30R outlet(s)

Built-in
controllable
switched load
banks

Two switchable four-outlet load banks

Output AC
waveform (AC
mode)

Pure Sine wave

Output AC
waveform (battery
mode)

Pure Sine wave

INPUT

Rated input
current (at
maximum load)

24A

Nominal Input
Voltage(s)
Supported

100V AC; 110V AC; 115V AC; 120V AC; 127V AC

Nominal input
voltage description

120V factory default

UPS input
connection type

L5-30P

Input circuit
breaker

40A

UPS Input cord
length (ft.)

10

UPS Input cord
length (m)

3

Recommended
Electrical Service

30A 120V

BATTERY

Full load runtime
(minutes)

4 min. (2700w)

Half load runtime
(minutes)

11 min. (1350w)

Expandable
battery runtime

Extended runtime supported via optional external battery packs

External battery
pack compatibility

BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible)

Expandable
runtime description

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software, see
manual for details

DC system voltage
(VDC)

72

Battery recharge
rate (included
batteries)

Less than 3 hours recharge to 90%

Replacement
battery cartridge
(internal UPS
battery
replacement)

RBC96-3U

Battery Access Front panel battery access