Page 1
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SU3000RTXL3U
SmartOnline Expandable 3U Rack / Tower UPS System - On-line, double-conversion, sine wave UPS with PDU
switching, current monitoring and fault tolerant auto-bypass
Highlights
3000VA / 2400W on-line, double-conversion, extended-run 3U rack / tower
UPS
Zero transfer time, on-line, double-conversion and economy-mode operation
supported
Maintains sine-wave 110/120V +/-2% output during overvoltages to 138 and
brownouts as low as 65V (50/60Hz auto-sensing)
Simultaneous use communications via HID compliant USB port, serial port,
SNMP/Web card slot and EPO interface
Fault tolerant auto-bypass mode, current monitoring and switched PDU control
via 2 switchable output load banks
Input: NEMA L5-30P (120V) / Output: 4 NEMA5-15R, 4 NEMA5-15/20R & 1
NEMA L5-30R
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA &
Canada only)
Estimated Retail Pricing: $1,400.00
Description
3000VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 3U rackmount form factor with an
installed depth of 26 inches. Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs. Full time sine wave
110 or 120V +. -2% output. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to
completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V.
Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs. NEMA L5-30P input plug. NEMA 5-15, NEMA
5-15. 20R and NEMA L5-30R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery
operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot.
Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability.
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports
simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once. Includes
PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two bank PDU switching supports load
shedding and remote-reboot of connected equipment. 3 stage metered current monitoring and battery charge status LEDs. Dataline surge
suppression for dialup, DSL or network ethernet connection. Mains power and voltage regulation LEDs. Audible Alarm. Self-test. Fault-tolerant
auto-bypass mode. LED display panel easily rotates for better viewing in rackmount or tower configurations. 4 post rackmount accessories.
2-9USTAND tower kit and 2POSTRMKITWM two post rackmount hardware accessories available. Field replaceable, hot swappable internal
batteries and external battery packs. Attractive all-black UPS design. Two year warranty with $250,000 connected equipment insurance. Extended
warranty and service contracts available.
Applications
Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or
tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM
Page 2
workstations, concentrators, IP telephony and traditional PBX switching systems.
Package Includes
SU3000RTXL3U UPS System
PowerAlert Software and Cabling
Mounting hardware for 4 post rack enclosures
Instruction manual with warranty information
Features
SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications
True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage
conditions
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other
UPS types
Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
Standard internal battery set offers 14 minutes runtime at half load (1200W) and 5 minutes at full load (2400W)
Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs
Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches
Ships with all mounting accessories for 4 post rackmount installation
Optional 2POSTRMKITWM enables 2 post rackmount installation
Optional 2-9USTAND accessory enables small-footprint upright tower placement
Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure
and requires maintenance
Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot
HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus
any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current,
battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS
nominal voltage adjustment and UPS line to battery power voltage setpoints
Built-in Emergency Power Off (EPO) interface with cable
NEMA L5-30P input plug / NEMA 5-15/20R & L5-30R output receptacles
Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each
bank has four outlets)
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations; no time consuming connection of internal batteries by user required
Single line TEL/DSL or network ethernet line surge suppression
2 year manufacturer's product warranty; $250,000 Ultimate Lifetime Insurance
Specifications
SYSTEM OVERVIEW
Voltage
compatibility
120V AC (100/110/120V)
Frequency
compatibility
50/60 Hz compatible (auto-sensing)
OUTPUT
Output VA 3000
Output watts 2400
Output nominal
voltage
120V AC (100/110/120V)
Output voltage
regulation
Maintains full-time sine wave output within 2% of selected nominal, less than 3% total harmonic distortion (linear load) /
5% total harmonic distortion (computer load) (Less than 5% THD on-line and on-battery)
Output frequency
regulation
Regulates line frequency to 50/60Hz +/- 0.05Hz
Page 3
Outlet quantity /
type
4 NEMA 5-15R, 4 NEMA 5-15/20R, 1 NEMA L5-30R
Customized load
management
receptacles
2 controllable load banks support load shedding and remote reboot on demand of locked network devices (each bank has
4 outlets)
Overload
protection
Via 40A input breaker
INPUT
Maximum input
amps
24A
Input connection
type
NEMA L5-30P
Input cord length 10ft / 3m
Recommended
Electrical Service
120V 30A dedicated circuit
BATTERY
Full load runtime 5 minutes (2400 watts)
Half load runtime 14 minutes (1200 watts)
Expandable
battery runtime
Supports extended runtime with optional external battery packs BP72V15-2U (limit 1) and BP72V28RT-3U (multi-pack
compatible)
DC system voltage 72VDC
Typical battery
lifespan
3-6 years, depending on usage
Battery recharge
rate
less than 6 hours to 90%
Replacement
Battery Cartridge
RBC96-3U (qty 1)
VOLTAGE REGULATION
Voltage regulation
description
On-line, double-conversion power conditioning maintains output within 2% of 110/120 volts at all times
Overvoltage
correction
Maintains output of selected nominal +/-2% during overvoltages to 138V AC
Brownout
correction
Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage
correction extends to 80V)
LEDS ALARMS & SWITCHES
Front panel LEDs LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery
low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LED display panel easily rotates for
better viewing in rackmount or tower configurations.
Alarms Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on / 0.5 seconds
off), low battery warning (1.25 seconds on / 0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on /
1 second off), input voltage out of frequency (2.1 seconds on / 0.14 seconds off) and high input voltage (2.1 seconds on
0.07 seconds off)
Switches Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal
AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions
require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds
SURGE / NOISE SUPPRESSION
AC surge
suppression
480 joules
AC suppression
response time
480 joules
Dataline
suppression
Set of 8 wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and
6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at
260V
Page 4
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Shipping weight
(lbs)
112.44
Shipping weight
(kg)
55.53
Shipping
Dimensions
(HWD/in)
11.25 x 23 x 31.5
Shipping
Dimensions
(HWD/cm)
28.5 x 58.4 x 79.3
Unit weight (lbs) 73.85
Unit weight (kg) 33.49
Unit Dimensions
(HWD/in)
5.25 x 17.75 x 26
Unit Dimensions
(HWD/cm)
13.3 x 45 x 66
Material of
construction
Steel
Form factors
supported
Rack (3U)
Cooling method Built-in cooling fan
Battery Access User replaceable, hot-swappable battery replacement supported via front access panel
ENVIRONMENTAL
Relative Humidity 0 to 95%, non-condensing
Storage
Temperature
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Operating
Temperature
32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Line mode BTU/hr.
(Max.)
1219.3 BTU/hr. (worst case)
Battery mode
BTU/hr. (Max.)
1328.4 BTU/hr. (worst case)
COMMUNICATIONS
Network
monitoring port
Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact
closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto
shutdown features of
Software and
cabling included
Yes, includes PowerAlert software CD-ROM and complete cabling
SNMP compatibility Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
of application / OS or hard power off/on reboot of connected equipmentâ"ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
Zero, online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted,
UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage
transfer to battery
power
Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover
point, output is supported from battery derived AC power.
Page 5
High voltage
transfer to battery
power
Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is
supported from battery derived AC power.
SPECIAL FEATURES
EPO port Supports "Emergency Power Off" via set of dedicated built-in EPO jacks
Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance Attractive black steel rackmount housing
BATTERY PACK ACCESSORY (optional)
Battery Pack
Accessory
(optional)
BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible)
CERTIFICATIONS
Certifications Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class A (emissions), FCC Part 68 / Industry
Canada (telecommunications), RoHS compliant.
WARRANTY
Product Warranty
Period
2 year product warranty
Connected
Equipment
Coverage
$250,000 connected equipment insurance (USA and Canada only)
Optional Coverage 3-5 year warranties, plus next day and on-site warranty coverage available for select opportunities. Contact Tripp Lite for
additional information.
Related Items
Extended Warranties
WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models,
2200-3000VA
Qty: [optional]
WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models,
2200-3000VA or less
Qty: [optional]
External Battery Packs
BP72V15-2U BP72V15-2U - External Battery Pack for UPS System Qty: [optional]
BP72V28RT-3U BP72V28RT-3U - External Battery Pack for UPS System Qty: [optional]
Power Distribution
PS7224 Tripp Lite Power Strip - Multiple outlets wherever you need them Qty: [optional]
PDU1215 Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking
equipment
Qty: [optional]
Rackmount/Wallmount Kits
2POSTRMKITWM Universal 2-Post Rackmount Kit (Supports 2U to 4U UPS systems and battery packs.) Qty: [optional]
Shutdown Cable Kits
AS400CABLE KIT Power Management Tools - UPS Communication Cable Kit for System i / AS400 / iSeries
Servers
Qty: [optional]
SNMP Accessories
ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or
switched PDU.)
Qty: [optional]
SNMPWEBCARD For remote monitoring and control via SNMP, Web or telnet. Qty: [optional]
Surge Protectors
DTEL2 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional]
Page 6
DNET1 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional]
DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines Qty: [optional]
Tower Stands
2-9USTAND Tower Stand - Expandable Tower Base Stand UPS Accessory Qty: [optional]
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3023.
©2009 Tripp Lite. All Rights Reserved.
Loading...