Tripp Lite SU2200XLCD User Manual

Download

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SU2200XLCD

SmartOnline 2.2kVA On-Line Double-Conversion UPS, Tower, Interactive LCD display, 100/110/120/127V NEMA 5-15/20R & L5-20R outlets

Highlights

2200VA / 2.2kVA / 1800 watt on-line double-conversion tower UPS

100/110/120/127V 50/60Hz output, 97% efficiency economy mode option

Interactive LCD with 10 selectable screens of UPS and site power data

Expandable runtime, Hot-swappable batteries

USB, RS232 & EPO ports, SNMPWEBCARD option

2 independently switched load banks

NEMA 5-20P input; 6 5-15/20R & 1 L5-20R outlets

Description

Tripp Lite Smart Online UPS systems offer high performance power protection ideal for critical server and network equipment in a variety of application environments. Online, double-conversion Uninterruptible Power Supply / UPS maintains perfectly regulated output power by continuously converting raw AC input to DC, then re-converting output back to AC. Sine wave AC output with +/-2% voltage regulation powers network equipment continuously, even during severe brownouts and overvoltages, all without depleting UPS battery reserves. Maintains battery-derived AC output during power failures with zero transfer time. Extended runtime options available. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Highly efficient operation in optional economy mode saves BTU heat output and energy costs. Network management interfaces support communications via USB, RS-232, contact-closure and optional SNMPWEBCARD network interface. Built-in DB9 port offers both enhanced RS-232 data and basic contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. LED display reports UPS operating mode, line power availability, battery mode operation, inverter operation, ECO mode status and output power availability. Audible alarm with push-button momentary alarm-cancel and silent-mode LCD configuration options. Programmable self-test. Fault-tolerant auto-bypass mode. Battery independent restart. Field-replaceable, hot-swappable internal batteries and external battery packs.

Package Includes

SU2200XLCD UPS System PowerAlert Software CD and cabling Owner's Manual with warranty information EPO (Emergency Power Off) cabling

Features

Tripp Lite SU2200XLCD 2200VA / 2.2kVA / 1800W on-line, double-conversion tower UPS Selectable 100/110/120/127V output (120V factory preset) NEMA 5-20P input, 6 5-15/20R & 1 L5-20R outlets Two switched output load banks support remote reboot and programmable load shedding options Supports 2% output voltage regulation and zero transfer time in double conversion mode Economy mode option offers high 97% efficiency, reduced power consumption and lower BTU emissions 13 minutes runtime at 50% load (900W) and 4.5 minutes at 100% load (1800W) with internal batteries Extended runtime options available with BP48V24-2U (limit 1) or BP48V60RT3U (no limit) external battery packs (external battery configurations require Tripp Lite's External Battery Configuration Software) LCD interface reports operating mode plus 10 selectable screens of UPS data (Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Load kVA, Load kW, Battery charge percentage, Battery voltage and Minutes runtime) LCD interface also supports 9 screens of advanced UPS configuration, setup and information options (Output voltage, Output frequency, Frequency regulation, Bypass range, Economy mode, Audible alarm, Overload alarm, External battery, Display IP address)

Single line TEL / Network surge suppression Electronic bypass maintains utility output during a variety of UPS fault conditions Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement Frequency regulation / conversion mode offers generator-compatible frequency correction or conversion of frequency from 50 to 60Hz or 60 to 50Hz Built-in USB, RS-232, contact-closure and optional SNMPWEBCARD accessory monitoring options HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

2200

Output kVA capacity (kVA)

2.2

Output Watt Capacity (watts)

1800

Output kW capacity

1.8

Output power factor

0.82

Output Capacity Details

ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120V 1800 watts, 115V 1620 watts, 110V 1530 watts, 100V 1440 watts). FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 1260 watts, 115V 1134 watts, 110V 1071 watts, 100V 1008 watts).

Crest Factor 3:1

Nominal Output Voltage(s) Supported

100V; 110V; 120V; 127V

Nominal Voltage details

120V default

Frequency compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency compatibility details

ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency when input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz of selected nominal.

Output voltage regulation (line mode)

+/- 2%

Output voltage regulation (Economy line mode)

+/- 10%

Output voltage regulation (Battery mode)

+/- 3%

Built-in UPS output receptacles

6 5-15/20R outlet(s); 1 L5-20R outlet(s)

Built-in controllable switched load banks

Two switchable three-outlet load banks

Output AC waveform (AC mode)

Pure Sine wave

Output AC waveform (battery mode)

Pure Sine wave

INPUT

Rated input current (at maximum load)

16A

Nominal Input Voltage(s) Supported

100V AC; 110V AC; 120V AC; 127V AC

Nominal input voltage description

120V factory default

UPS input connection type

5-20P

Input circuit breaker

30A

UPS Input cord length (ft.)

UPS Input cord length (m)

Recommended Electrical Service

15A 120V

BATTERY

Full load runtime (minutes)

4.5 min. (1800w)

Half load runtime (minutes)

13 min. (900w)

Expandable battery runtime

Extended runtime supported via optional external battery packs

External battery pack compatibility

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible)

Expandable runtime description

External battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for details

DC system voltage (VDC)

Battery recharge rate (included batteries)

Less than 3 hours from 10% to 90%

Replacement battery cartridge (internal UPS battery replacement)

RBC48-SUTWR

Battery Access Battery access door

Battery replacement description

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage regulation description

Online, double-conversion power conditioning

Overvoltage correction

2% output voltage regulation during overvoltages to 150

Undervoltage correction

2% output voltage regulation during undervoltages to 55V (33% load), 70V (70% load), 100V (100% load)

LEDS ALARMS & SWITCHES

Front panel LCD display

Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options

Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Alarm cancel operation

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available

Switches 2 switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating

570

UPS AC suppression response time

Instantaneous

UPS Dataline suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC noise suppression

Yes

PHYSICAL

Installation form factors supported with included accessories

Tower

Primary form factor Tower

UPS / Power Module dimensions in primary form factor (height x width x depth / inches)

10.2 x 9 x 19.5

UPS / Power Module dimensions in primary form factor (height x width x depth / cm)

25.9 x 22.9 x 49.5

UPS / Power Module weight (lbs)

52.9

UPS / Power Module weight (kg)

UPS Shipping dimensions (height x width x depth / inches)

15.2 x 13 x 24

UPS Shipping dimensions (height x width x depth / cm)

38.6 x 33 x 61

Shipping weight (lbs)

58.2

Shipping weight (kg)

26.4

UPS housing material

Steel

Cooling method Fan

ENVIRONMENTAL

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr. (full load)

684

AC economy mode BTU / hr. (full load)

190

Battery mode BTU / hr. (full load)

1087

AC economy mode efficiency rating (100% load)

97%

Audible Noise < 50.5 dB at front side 1m

COMMUNICATIONS

Communications interface

USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface

Network monitoring port description

Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications

PowerAlert software

Included

Communications cable

USB and DB9 cabling included

WatchDog compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer time Zero transfer time (0 ms.) in online, double-conversion and frequency regulation / conversion modes;

Low voltage transfer to battery power (setpoint)

55V (33% load), 70V (70% load), 100V (100% load)

High voltage transfer to battery power (setpoint)

150

SPECIAL FEATURES

Cold Start (startup in battery mode during a power failure)

Cold-start operation supported

High availability UPS features

Automatic inverter bypass; Hot swappable batteries

Green & high efficiency features

High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy mode operation

CERTIFICATIONS

UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

WARRANTY

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

Tripp Lite SU2200XLCD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual