SmartOnline 120V 1kVA 800W DoubleConversion UPS, 2U Rack/Tower, Extended Run,
Pre-Installed WEBCARDLX Network Interface,
USB, DB9 Serial
MODEL NUMBER: SU1000RTXL2UN
Description
1000VA on-line, double-conversion UPS system for critical server, network and telecommunications
equipment. 2U rackmount form factor with an installed depth of only 13.5 inches. Extended runtime
available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack
compatible) or BP24V36-2US (multi-pack compatible) external battery packs. Full-time sine wave 120V
output with +/-2% voltage regulation. Online, double-conversion Uninterruptible Power Supply (UPS)
actively converts raw incoming AC power to DC, then re-converts output back to completely regulated,
filtered AC output. Operates continuously without using battery power during brownouts to 65V and
overvoltages to 150V. Highly efficient operation in optional economy mode saves BTU heat output and
energy costs. NEMA 5-15P input plug; NEMA 5-15R output receptacles. Network-grade AC surge and
noise suppression. Zero transfer time between AC and battery operation. Network management interfaces
support simultaneous communications via USB port, DB9 serial port and pre-installed WEBCARDLX
network management interface card.
The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS
status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or
SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring
capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet,
SSH, FTP, DHCP and NTP.
Highlights
●
1000VA / 1kVA / 800 watt online double-conversion 2U
rack/tower UPS
●
120V +/-2% output at 50/60Hz,
high efficiency economy mode
option
●
Expandable runtime, Hot-swap
batteries; 13.5 in / 34.3cm
installed depth
●
USB, RS232 & EPO ports; preinstalled WEBCARDLX Network
Interface
●
Front panel status LEDs with
detailed load and battery
metering
●
2 independently switchable
output load banks
●
NEMA 5-15P input; 5-15R
outlets
●
To enable the Auto Probe
feature, this product requires LX
firmware update 15.5.2 or later
to be installed
Package Includes
●
SU1000RTXL2Ua with preinstalled WEBCARDLX interface
●
USB, DB9 and EPO cabling
●
Mounting hardware for 4 post
rack enclosures
●
Instruction manual
Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring
ability. HID-compliant USB interface enables integration with built-in power management and auto
shutdown features of Windows and Mac OS X.Supports simultaneous detailed monitoring of equipment
1 / 7
load levels, self-test data and utility power conditions via all 3 network interfaces. PowerAlert UPS
monitoring software is available via free download. Emergency Power Off (EPO) interface. Integrated twobank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered
current monitoring and battery charge status LEDs. LED display panel easily rotates for viewing in
rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet
connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass
mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack
& wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external
battery packs. $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).
Features
●
SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial
network applications
●
True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 120V
under all usage conditions
●
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer
time
●
Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs
●
Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve
power problems not addressed by other UPS types
●
Corrects line voltage conditions as low as 65V and as high as 150V back to 120V (+/-2%) values
●
Standard internal battery set offers 14 minutes runtime at half load (400W) and 4.5 minutes at full load
(800W)
●
Extended runtime available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U
(multi-pack compatible) and BP24V36-2US (multi-pack compatible) external battery packs
●
Some external battery configurations require the use of Tripp Lite's External Battery Configuration
Software (see manual)
●
Intelligent battery management system extends battery life
●
Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth
of only 13.5 inches
●
Ships with all mounting accessories for 4 post rackmount installation
●
Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
●
Optional 2-9USTAND accessory enables small-footprint upright tower placement
●
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
●
Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure
and pre-installed WEBCARDLX network management card
●
WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email
notifications via secure web browser, SNMP, telnet or SSH
●
Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status
●
Reduce Service Calls with Auto Probe Autonomous Device Management. Auto Probe feature (Firmware
2 / 7
15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device
and automatically takes one or more user-configured actions if the device fails to respond; actions
include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in
conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
●
HID-compliant USB interface enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X
●
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from poweralert
●
Built-in Emergency Power Off (EPO) interface with cable
●
NEMA 5-15P input plug/NEMA 5-15R output receptacles
●
Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot
of individual devices (each load bank consists of one outlet)
●
Front panel LEDs offer current monitoring and battery charge level information
●
Single line TEL/DSL or network Ethernet line surge suppression
●
$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
Specifications
OVERVIEW
UPC Code 037332189646
UPS Type On-Line
INPUT
Rated input current (Maximum Load) 8.6A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
Input Circuit Breakers 15A
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.1
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
OUTPUT
Output Volt Amp Capacity (VA) 1000
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 800
3 / 7
Output Capacity Details OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150%
load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and
frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE
bypass limits)
Power Factor 0.8
Crest Factor 3:1
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start
Output Voltage Regulation (Line
Mode)
Output Voltage Regulation
(Economy Line Mode)
Output Voltage Regulation (Battery
Mode)
+/- 2%
+/- 10%
+/- 2%
Load Management Receptacles Two switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery
Mode)
Nominal Output Voltage(s)
Supported
Pure Sine wave
120V
Output Receptacles (6) 5-15R
Individually Controllable Load Banks Yes
BATTERY
Full Load Runtime (min.) 4.5 min. (800w)
Half Load Runtime (min.) 14 min. (400w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
External Battery Pack Compatibility <a class="productLink" href="// External-24V-2U-Rack-Tower-Battery-Pack-for-select-Tripp-
Lite-UPS-Systems~BP24V15RT2U">BP24V15RT2U</a> (limit 1); <a class="productLink"
href="// External-24V-2U-Rack-Tower-Battery-Pack-select-Tripp-Lite-UPS-Systems~BP24V28-
2U">BP24V28-2U</a> (limit 1); <a class="productLink" href="// External-24V-3U-
Rack-Tower-Battery-Pack-select-Tripp-Lite-UPS-Systems~BP24V70-3U">BP24V70-3U</a> (multi-pack
compatible); <a class="productLink" href="// external-24v-2u-rack-mount-battery-pack-for-
tripp-lite-ups-systems-SMART750-SU750-SU1000-SUINT1000-and-more~BP24V36-2US">BP24V36-
2US</a> (multi-pack compatible)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included
Batteries)
Internal UPS Replacement Battery
Cartridge
Less than 6 hours from 10% to 80% (typical, full load discharge)
<a class="productLink" href="// 2U-UPS-Replacement-24VDC-Battery-Cartridge-1-set-2-
select-Tripp-Lite-SmartPro-UPS~RBC92-2U">RBC92-2U</a>
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime Yes
VOLTAGE REGULATION
4 / 7
Voltage Regulation Description Online, double-conversion power conditioning
Overvoltage Correction 2% output voltage regulation during overvoltages to 150
Undervoltage Correction 2% output voltage regulation during undervoltages to 80
Severe Undervoltage Correction 2% output voltage regulation during undervoltages to 65 (under 70% load only)
USER INTERFACE, ALERTS & CONTROLS
Switches 2 switches control off/on power status and alarm-cancel/self-test operation. LX Platform Interface: Recessed reset
switch for interface reboot and factory reset
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown
conditions
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery
and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in
rack/tower formats. Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps
(Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update
(Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 510
UPS AC Suppression Response
Time
Instantaneous
UPS Dataline Suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Cooling Method Fan
Included Mounting Accessory
Description
Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to
914mm)
Installation Form Factors Supported
with Included Accessories
Installation Form Factors Supported
with Optional Accessories
4 post 19 inch rackmount
2 post rackmount ( <a class="productLink" href="// 2-Post-Rack-Mount-Wall-Mount-Adapter-
Kit-select-Rack-Mount-UPS-Systems~2POSTRMKITWM">2POSTRMKITWM</a> ); 2-4 post front rail
rackmount ( <a class="productLink" href="// Heavy-Duty-2-post-Front-Mounting-Ear-
Kit~UPSHDEARKIT">UPSHDEARKIT</a> ); 4 post rackmount short-depth ( <a class="productLink"
href="// 4-Post-1U-Universal-Adjustable-Rack-Mount-Shelf-Kit-for-Wall-Mount-
Racks~4POSTRAILKITWM">4POSTRAILKITWM</a> ); Tower ( <a class="productLink"
href="// 2U-9U-Tower-Stand-Kit-select-Rack-Mount-UPS-Systems~2-9USTAND">2-
9USTAND</a> ); Wallmount ( <a class="productLink" href="// 2-Post-Rack-Mount-
Wall-Mount-Adapter-Kit-select-Rack-Mount-UPS-Systems~2POSTRMKITWM">2POSTRMKITWM</a> )
Minimum Required Rack Depth (cm) 41.91
Minimum Required Rack Depth
(inches)
16.5
Optional Mounting Accessory Notes Optional <a class="productLink" href="// 2U-9U-Tower-Stand-Kit-select-Rack-Mount-UPS-
Systems~2-9USTAND">2-9USTAND</a> enables upright tower UPS placement; <a
class="productLink" href="// 2-Post-Rack-Mount-Wall-Mount-Adapter-Kit-select-Rack-Mount-UPS-
Systems~2POSTRMKITWM">2POSTRMKITWM</a> enables wall-mount and 2-post rackmount installation;
<a class="productLink" href="// 4-Post-1U-Universal-Adjustable-Rack-Mount-Shelf-Kit-for-
Wall-Mount-Racks~4POSTRAILKITWM">4POSTRAILKITWM</a> enables installation in 4-post short-depth
racks from 14.5 to 23.5 inches (368 to 597mm); <a class="productLink" href="// Heavy-
Duty-2-post-Front-Mounting-Ear-Kit~UPSHDEARKIT">UPSHDEARKIT</a> enables installation in 2 or 4-post
racks using front vertical rails only, without rear support
5 / 7
Primary Form Factor Rackmount
Primary UPS Depth (mm) 343
Primary UPS Height (mm) 89
Primary UPS Width (mm) 445
Rack Height 2U
Shipping Dimensions (hwd / cm) 23.11 x 50.55 x 59.18
Shipping Dimensions (hwd / in.) 9.10 x 19.90 x 23.30
Shipping Weight (kg) 18.14
Shipping Weight (lbs.) 40.00
UPS Housing Material Steel
UPS Power Module Dimensions
(hwd, cm)
UPS Power Module Dimensions
(hwd, in.)
8.89 x 44.45 x 34.29
3.5 x 17.5 x 13.5
UPS Power Module Weight (kg) 13.15
UPS Power Module Weight (lbs.) 29
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 408
AC Economy Mode BTU / Hr. (Full
Load)
114
Battery Mode BTU / Hr. (Full Load) 444
AC Mode Efficiency Rating (100%
Load)
AC Economy Mode Efficiency Rating
(100% Load)
87%
96%
COMMUNICATIONS
Network Management Cards <a class="productLink" href="// Web-Management-Accessory-
Card~WEBCARDLX">WEBCARDLX</a>
Network Monitoring Port Description Includes pre-installed WEBCARDLX Network Management Card; DB9 port supports RS232 and contact closure
communications; Economy-mode setting option is available using PowerAlert software and DB9 Serial cable
connection OR installed Network Management Card
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
http:// poweralert
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
EPO Port RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems
6 / 7
Communications Interface Contact closure; DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface;
LINE / BATTERY TRANSFER
Transfer Time No transfer time (0 ms.) in online, double-conversion mode
USB (HID enabled)
Low Voltage Transfer to Battery
Power (Setpoint)
High Voltage Transfer to Battery
Power (Setpoint)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure)
High Availability UPS Features Automatic inverter bypass; Hot swappable batteries; Auto Probe Monitoring and Reboot (included); Zero transfer
Green Energy-Saving Features High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy
STANDARDS & COMPLIANCE
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category B (EMI)
WARRANTY
Product Warranty Period
(Worldwide)
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
80V (100% load), 65V ( <70% load)
150
Cold-start operation supported
time; On-Line/Double-Conversion
mode operation
2-year limited warranty
$250,000 <a class="insuranceLink" href="// support/insurance-policy">Ultimate Lifetime
Insurance</a>
© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https:// products/product-certification-agencies
7 / 7
Loading...