Tripp Lite SU10000RT3U2TF User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU10000RT3U2TF

SmartOnline Expandable Rack/Tower UPS System - Online, double-conversion protection for mission-critical
applications

Highlights

10,000VA / 10kVA online 10U rack / tower UPS with expandable runtime (3U

Power Module + 3U Battery Pack + QTY 2 -2u stepdown transformers)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Manual Bypass Switch and detachable PDU enables hot-swap UPS

replacement without powering off connected loads

Maintains 208V and simultaneous 120V output

2% output voltage regulation over an input voltage range of 156 to 276

Enhanced serial communications ports, SNMP/Web Card Slot and EPO

interfaces

$250,000 Ultimate LIfetime Insurance (USA & Canada only).

Description

10,000 VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 10 rack spaces

(3U power module, 3U battery pack and two 2U step-down transformers). Maximum installed rack depth of 32.5 in. Expandable battery runtime with

optional external battery packs. Full-time sine wave 208V and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts

output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and

overvoltages to 276V. Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs. Standard 3-wire 208V

hardwire input connection; NEMA L6-30R, L6-20R and 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass

switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero

transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and

optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network

interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer

at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power

status. LED/LCD display panel easily rotates for better viewing in rackmount or tower configurations. LCD panel with scroll buttons offers detailed

diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and

battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included;

2POSTRMKITWM two post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery 2-year

warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

3U power module with detachable hot-swap PDU input/output panel and manaul bypass switch
3U external battery pack
2 x 2U step-down transformers
Two sets of 4-post rackmount rails (one for each 3U component); one set of tower stands for upright tower installation
PowerAlert Software, complete data cabling, user manual with warranty information

Features

10,000 VA on-line, double-conversion UPS system (high voltage input/high AND low voltage output)
Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected
equipment
Installs in only 10 rack spaces (3U power module, 3U battery pack, 2 x 2U step-down transformers) with a maximum installed depth of 32.5
inches
Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of
optional external battery packs
Full-time sine wave 208V and simultaneous 120v +/-2% output
Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
Standard 3-wire 208V hardwire input connection
2 NEMA L6-30R, 4 L6-20R and 24 5-15/20R output receptacles
Detailed LCD panel with scroll buttons offers detailed diagnostic test
Network-grade AC surge and noise suppression
Zero transfer time between AC and battery operation
Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown,
remote control and monitoring of UPS system and power data
Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes
PowerAlert monitoring software and complete cabling
Emergency Power Off (EPO) interface
Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode
and output power status.
Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
Field-replaceable, hot-swappable power module and external battery packs
Attractive all-black color scheme
2-year warranty; $250,000 connected equipment insurance
Extended warranty and service contracts available

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V & 120V AC

Frequency
compatibility

50/60 Hz

OUTPUT

Output VA 10000

Output watts 8000

Output nominal
voltage

208V & 120V AC

Output voltage
regulation

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total
harmonic distortion when used with computer loads

Output frequency
regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type 2 x NEMA L6-30R, 4 x NEMA L6-20R, 24 x NEMA 5-15/20R

INPUT

Maximum input amps 208V- 44.9A

Input connection type Hardwire