Tripp Lite SU10000RT3U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU10000RT3U

SmartOnline Expandable Rack/Tower UPS System - Online, double-conversion protection for mission critical
applications

Highlights

10,000VA/10kVA on-line 6U rack/tower UPS with expandable runtime (3U

Power Module + 3U Battery Pack)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Manual bypass switch and detachable PDU enable hot-swap UPS

replacement without powering off connected loads

200, 208, 230 or 240V selectable input/output voltage

2% output voltage regulation over an input voltage range of 156-276V

Enhanced serial communications ports, SNMP/Web Card Slot and EPO

interfaces

$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Description

10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack

spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional external battery

packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back

to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to

276V. Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs. Standard 3-wire 208V hardwire input

connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS

replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and

battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot.

Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert

monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power

status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel rotates for

better viewing in rackmount or tower configurations. Detailed LCD panel with scroll buttons provides detailed diagnostic test information at startup

and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm.

Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount

hardware accessories available. Field-replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme.

2-year warranty; extended warranty and service contracts available. $250,000 connected equipment insurance

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

3U power module with detachable hot-swap PDU input/output panel and bypass switch
3U external battery pack

Two sets of 4-post rackmount rails (one for each of the 3U components)
One set of tower stands for upright tower configuration
PowerAlert Software, complete cabling, owner's manual with warranty information

Features

10,000VA (10kVA) on-line, double-conversion UPS system (high-voltage input/high-voltage output)
Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected
equipment
Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 in.
Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of
optional external battery packs
Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
Actively converts raw incoming AC power to DC, then re-converts output to completely regulated, filtered AC output
Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
Standard 3-wire 208V hardwire input connection
4 x NEMA L6-20R and 2 x NEMA L6-30R output receptacles
Detailed LCD panel with scroll buttons provides detailed diagnostic test information on startup and during self tests, plus real-time data on
input and output voltage, frequency (Hz), load percentage, battery charge level and more
Network-grade AC surge and noise suppression
Zero transfer time between AC and battery operation
Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown,
remote control and monitoring of UPS system and power data
Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes
PowerAlert monitoring software and complete cabling
Emergency Power Off (EPO) interface
Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass
mode and output power status
Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
Field-replaceable, hot-swappable power module and external battery packs
Attractive all-black color scheme
2-year warranty; extended warranty and service contracts available
$250,000 connected equipment insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V AC (200/208/220/230/240V)

Frequency
compatibility

50/60 Hz

OUTPUT

Output VA 10000

Output watts 8000

Output nominal
voltage

208V AC (200/208/220/230/240V)

Output voltage
regulation

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total
harmonic distortion when used with computer loads

Output frequency
regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type 4 x NEMA L6-20R, 2 x NEMA L6-30R

INPUT

Maximum input amps 200V-46.7A / 208V- 44.9A / 220V- 42.4A / 230V-40.6A / 240V-38.9A

Input connection type Hardwire

BATTERY