Tripp Lite SMX1500XLRT2U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMX1500XLRT2U

SmartPro 1.5kVA Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 2U Rack/Tower,
USB, Serial, EPO, 230V

Highlights

1500VA / 1.5kVA line interactive 2U rack / tower UPS; Sine wave output

230V nominal output during brownouts to 151V and overvoltages to 282V

USB, RS232, EPO and optional SNMP/Web card interface

Expandable runtime, Status LEDs with load and battery capacity display

3 independently switchable output load banks; 13.5 in / 34.3 cm depth

C14 input; 8 C13 outlets; Includes 2 C13 to C14 cables

Description

Tripp Lite's SMX1500XLRT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment

damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large

internal batteries offer 18 minutes half load runtime and 7 minutes at full load. Runtime is expandable with optional BP36V15-2U external battery

pack (limit 1) or BP36V42-3U (multi-pack compatible). Maintains regulated 230V nominal output without using battery power during brownouts and

overvoltages from 151 to 282V. 1500VA/1000 watt power handling capability and full time sine wave output offers guaranteed compatibility with

networking, telecom and other sensitive electronic applications. Includes a total of 8 outlets with 3 load banks that are individually switchable via

software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS

monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD

adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or

emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade

AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive

all-black color scheme.

Package Includes

SMX1500XLRT2U UPS System with mounting hardware

Two 1.8m IEC320-C13 to C14 load jumper cables

Cabling for USB & DB9 monitoring and EPO switching

PowerAlert unattended shutdown and UPS/Power monitoring software

Warranty information and instruction manual

Features

SMX1500XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during

brownouts and overvoltages, plus network-grade AC surge suppression

1500VA/1000 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and

other sensitive electronic devices

Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower

installation requires 2-9USTAND accessory

Large internal batteries support a max load of 1500VA for 7 minutes and a half load of 750VA for 18 minutes

Expandable runtime with BP36V15-2U (limit 1) or with multiple BP36V42-3U rack/tower external battery packs

Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V

Includes 8 UPS supported outlets arranged in 3 individually controllable load banks (2 outlets per bank) that can be powered off and back

on again via software interface

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,

event logging and running user-defined script commands.

Offers simultaneous monitoring by up to 2 directly-connected devices through included USB and DB9 interface ports, or the monitoring by

any number of additional servers over IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,

DC battery voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot

of connected devices

Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard

power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

1500

Output kVA capacity (kVA) 1.5

Output Watt Capacity
(watts)

1000

Output kW capacity 1

Output power factor 0.7

Nominal Output Voltage(s)
Supported

230V

Nominal Voltage details 230v nominal inverter output voltage

Frequency compatibility 50 / 60 Hz

Output voltage regulation
(line mode)

-17%, +8%

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

8 C13 outlet(s)

Included output power
cables

Includes 2 C13 to C14 output power cables

Built-in controllable
switched load banks

Three switchable two-outlet C13 load banks

Output AC waveform (AC
mode)

Sine wave