Tripp-Lite SMART5000TEL3U Specifications

SmartPro 208V 5kVA 3.75kW Line-Interactive Sine

Highlights

5kVA / 5000VA line interactive

3U rack/tower UPS; Sine wave

output

208V nominal output during

inputs of 174-282V; Supports

600VA 120V output

USB, Serial, EPO & slot for

Network Management Card

options

97% line-mode efficiency;

Hot-swappable internal batteries

NEMA L6-30P input; 2 NEMA

5-15R, 2 L6-20R & 1 L6-30R

outlets

Package Includes

SMART5000TEL3U UPS System

PowerAlert Software and cabling

Mounting hardware

Instruction manual

Wave UPS, 3U Rack/Tower, Network Card Options,
USB, DB9 Serial

MODEL NUMBER: SMART5000TEL3U

Description

Tripp Lite's SMART5000TEL3U intelligent, line interactive UPS protects server, networking and

telecommunications equipment from blackouts, voltage fluctuations and surges in a compact rackmount housing. Completely self-contained UPS system

occupies only 3 rack spaces(3U) in a standard 19 inch rack, making this model one of the smallest 5kVA UPS systems available. Included accessories support

mounting 4 post rack enclosures. Large capacity 5000 VA/3750 watt UPS system accepts raw AC input, adjusting output to regulated 208V levels. One pair of

120V outlets support up to 600VA monitors and other low voltage accessories. Includes slot for internal Network Management Card options, such as Tripp

Lite's SNMPWEBCARD, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power

data. Five outlets(two L6-20R, one L6-30R and two 5-15R) allow the connection of high current 20 and 30 amp 208V connectors and up to two 120V

devices(max 600VA at 120V).

Features

Large 5000VA/3750-watt output capacity accommodates solitary large loads or multiple low-power loads

High power density 5kVA power module occupies only 3 rack spaces(3U)

16 minutes half-load runtime(with a continuous load 2500VA; much longer runtime available at smaller loads)

Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power

High voltage output supports 208V server, internetworking and telecom applications

Pair of 120V outlets supports up to 600VA for standard 120V monitors, voicemail and other low-power networking devices

Five total outlets(two L6-20R, one L6-30R and two 5-15R)

Diagnostic LEDs provide visual indication of 17 separate performance conditions

Included PowerAlert Software provides e-mail or pager notification of power problems and simultaneous automatic unattended shutdown of multiple

servers

4 built-in communications ports(2 USB/2 DB9) for remote monitoring and unattended shutdown

Slot for Network Management Card options, such as Tripp Lite's SNMPWEBCARD and ENVIROSENSE environmental sensor

Emergency Power Off(EPO) interface for emergency shutoff in large facilities

Hot-swappable/user-replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or

removing the UPS from the rack

Intelligent battery management system extends battery life

UPS ships fully assembled and ready for installation; no time-consuming user battery connections required

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 5000

Output kVA Capacity (kVA) 5

Output Watt Capacity (Watts) 3750

Output kW Capacity (kW) 3.75

Output Capacity Details 120V 5-15R outlets are limited to 450 watts (max.)

Power Factor 0.75

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120V output is limited to 450 watts

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (2) 5-15R; (2) L6-20R; (1) L6-30R

Output Circuit Breakers 20A double pole breaker supports L6-20R outlets, 5A breaker supports 5-15R outlets, L6-30R outlet is unbreakered

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 24A

Nominal Input Voltage(s) Supported 208V AC

UPS Input Connection Type L6-30P

UPS Input Cord Length (ft.) 10

UPS Input Cord Length (m) 3

208V

208 & 120V (-6%, +20%)

+/- 5%

Recommended Electrical Service 30A 208V

Input Phase Single-Phase

BATTERY

Full Load Runtime (min.) 8.5 min. (3750w)

Half Load Runtime (min.) 20 min. (1875w)