Tripp Lite SMART3000RMXLN User Manual

SmartPro 120V 3kVA 2.88kW Line-Interactive
Sine Wave UPS, 2U Rack/Tower, Extended Run,
Pre-installed WEBCARDLX Network Interface,
LCD Display, USB, DB9 Serial

MODEL NUMBER: SMART3000RMXLN

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power
protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible
Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and
overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp
Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of
voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD
interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS
setup and configuration options. Super-fast switchover from line to battery power occurs within
milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode
efficiency offers reduced heat emissions and operating costs. Network management interfaces support
communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management
interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site
power and UPS status monitoring, configuration, control and email notifications via secure web browser,
SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet
network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring
capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet,
SSH, FTP, DHCP and NTP. HID-compliant USB port enables integration with built-in power management
and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed
monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS
monitoring software is available via free download. Switched output load banks enable scheduled and
real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD
display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push­button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-

Highlights

●

3kVA / 3000VA / 2880W line
interactive 2U rack/tower UPS,
Sine Wave

●

Extended runtime options up to
2880W, 0.96 Power Factor, 4
post mounting kit

●

USB, RS232, EPO and pre­installed WEBCARDLX Network
Interface

●

120V NEMA L5-30P input, 8
NEMA 5-15/20R & 1 L5-30R
outlets

●

To enable the Auto Probe
feature, this product requires LX
firmware update 15.5.2 or later
to be installed

Package Includes

●

SMART3000RMXLN UPS
system with Pre-installed
Network Management Card

●

USB, Serial & EPO cabling

●

4 post rackmount installation kit

●

Instruction manual

1 / 7

replaceable, hot-swappable battery modules.

Features

●

Tripp Lite SMART3000RMXLN line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity and
extended runtime options

●

Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages
from 83 to 145V

●

NEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently
switchable output load banks

●

Maintains uninterrupted operation of connected networking equipment during blackouts, surges,
brownouts and overvoltages

●

High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions

●

Internal batteries offer 10 minutes at 50% load (1440W) and 3 minutes at 100% load (2880W)

●

Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack
compatible) and BP48V27-2US (multi-pack compatible) external battery packs

●

External battery configurations require the use of Tripp Lite's External Battery Configuration Software
(see manual)

●

Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no
disruption to connected equipment

●

Intelligent battery management system extends battery life

●

Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar
battery charge graphic, plus 7 selectable screens of detailed UPS and site power information

●

LCD interface also supports a number of advanced user setup and operating preferences

●

Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post
rackmount/wallmount installation; Optional 2-9USTAND enables tower placement

●

Network interfaces support communications via built-in USB, DB9 serial / contact-closure and pre­installed WEBCARDLX network management card

●

WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email
notifications via secure web browser, SNMP, Telnet, SSH or Command Line

●

Reduce service calls with Auto Probe Autonomous Device Management. The Auto Probe feature
(Firmware 15.5.2 and greater) of the LX Plaftorm interface checks the connectivity status of any
networked device and automatically takes one or more user-configured actions if the device fails to
respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution
when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)

●

Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status

●

HID-compliant USB port enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X

●

USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert

2 / 7

●

Built-in Emergency Power Off (EPO) interface with cable

Specifications

OVERVIEW

UPC Code 037332177896
UPS Type Line-Interactive

INPUT

Rated input current (Maximum Load) 24A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type L5-30P
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.1
Recommended Electrical Service 30A 120V
Input Phase Single-Phase

OUTPUT

Output Volt Amp Capacity (VA) 3000
Output kVA Capacity (kVA) 3.00
Output Watt Capacity (Watts) 2880
Output kW Capacity (kW) 2.88
Power Factor .96
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line

Mode)
Output Voltage Regulation (Battery

Mode)
Load Management Receptacles Two switchable single outlet 5-15/20R load banks
Output Circuit Breakers Two 20A output breakers protect 4 5-15/20R outlets each
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery

Mode)
Nominal Output Voltage(s)

Supported
Output Receptacles (8) 5-15/20R; (1) L5-30R

+6%, -14%

+/-5%

Pure Sine wave

110V; 115V; 120V

Individually Controllable Load Banks Yes

3 / 7