Tripp-Lite SMART3000RM2U Specifications

SmartPro 120V 3kVA 2.25kW Line-Interactive Sine
Highlights
3kVA / 3000VA / 2250W line
interactive 2U rack/tower UPS,
Sine Wave
120V output, Corrects brownouts
and overvoltages from 83V to
145V
0.75 Power Factor, Interactive
LCD interface
Extended runtime options up to
1600W
4 post compatible mounting
accessories
98% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
Network Management Card
options
120V NEMA L5-30P input, 8
NEMA 5-15/20R & 1 L5-30R
outlets
This product is ENERGY STAR
qualified for its ability to save
customers money while
helping to protect the
environment
Package Includes
SMART3000RM2U UPS System
PowerAlert Software with USB,
Serial & EPO cabling
4-post rackmount installation kit
Instruction manual
Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9
MODEL NUMBER: SMART3000RM2U
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
with built-in Auto-Voltage Regulation(AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network
management interfaces support communications via USB, RS-232 and installed Network Management Card
option, such as Tripp Lite's SNMPWEBCARD network interface. HID-compliant USB port enables integration with
built-in power management and auto shutdown features of Windows and Mac OS X. Network communications
ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes
PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
outlets. Emergency Power Off(EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with
push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART3000RM2U line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity(1600W maximum load with external battery packs)
Line interactive UPS with Automatic Voltage Regulation(AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 10 minutes at 50% load(1125W) and 3.5 minutes at 100% load(2250W)
Extended runtime is available with optional BP48V24-2U(limit 1), BP48V60RT-3U(multi-pack compatible) and BP48V27-2US(multi-pack compatible)
external battery packs(max output de-rates to 1600 watts with external batteries)
External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)
Intelligent battery management system extends battery life
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND
enables tower placement
Built-in USB, RS-232 and slot for Network Management Card options, such as Tripp Lite's SNMPWEBCARD network interface
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 3000
Output kVA Capacity (kVA) 3
Output Watt Capacity (Watts) 2250
Output kW Capacity (kW) 2.25
Output Capacity Details Output is reduced to 1600 watts maximum when used with external battery packs
Nominal Output Voltage(s) Supported
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line Mode)
Output Voltage Regulation (Battery Mode)
Output Receptacles (8) 5-15/20R; (1) L5-30R
Load Management Receptacles Two switchable single-outlet load banks
Output Circuit Breakers Two 20A output breakers protect 4 5-15/20R outlets each
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 24A
110V; 115V; 120V
-14%, +6%
+/- 5%
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type L5-30P
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3
Recommended Electrical Service 30A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 3.5 min. (2250w)
Half Load Runtime (min.) 10 min. (1125w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
External Battery Pack Compatibility
DC System Voltage (VDC) 48
Battery Recharge Rate (Included Batteries)
Internal UPS Replacement Battery Cartridge
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction Input voltages between 83 and 95 are boosted by 24%
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
BP48V24-2U
Less than 4.5 hours from 10% to 90%
RBC94-2U
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
(limit 1);
BP48V60RT-3U
(multi-pack compatible);
BP48V27-2US
(multi-pack compatible)
Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
UPS AC Suppression Response Time
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Included Mounting Accessory Description
Installation Form Factors Supported with Optional Accessories
Primary Form Factor Rackmount
UPS Power Module Dimensions (hwd, in.)
UPS Power Module Dimensions (hwd, cm)
Rack Height (U Spaces) 2
Minimum Required Rack Depth (inches)
Minimum Required Rack Depth (cm) 67.2
UPS Power Module Weight (lbs.) 62.8
UPS Power Module Weight (kg) 28.5
UPS Shipping Dimensions (hwd / in.) 7.9 x 21.7 x 24.2
UPS Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.) 73.8
Shipping Weight (kg) 33.5
4 post rackmount installation accessories included
2 post rackmount( rackmount(
3.43 x 17.32 x 19.46
8.7 x 44 x 49.4
26.5
20.1 x 61.5 x 62
UPSHDEARKIT
2POSTRMKITWM
)
); Wallmount(
2POSTRMKITWM
); Tower(
2-9USTAND
); 2-4 post front rail
Cooling Method Fan
UPS Housing Material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 189
AC Mode Efficiency Rating (100% Load)
Operating Elevation (ft.) 0-3000m / 0-10,000 ft.
Audible Noise 45 dBA max front side 1m
Operating Elevation (m) 0 - 3000 m
COMMUNICATIONS
Communications Interface USB (HID enabled); DB9 Serial; Slot for SNMP/Web interface
98%
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility
LINE / BATTERY TRANSFER
Transfer Time 5 milliseconds (AC to battery); 1 millisecond (battery to AC)
Low Voltage Transfer to Battery Power (Setpoint)
High Voltage Transfer to Battery Power (Setpoint)
SPECIAL FEATURES
Grounding Lug Includes back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure)
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications
NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
83
145
Cold-start operation supported
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); ENERGY STAR Qualified
WARRANTY
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note:
Connected Equipment Insurance (U.S., Canada & Puerto Rico)
$250,000
Ultimate Lifetime Insurance
Registration is required
for 3-year warranty.
Loading...