Tripp-Lite SMART2200VS Specifications

SmartPro 120V 2.2kVA 1.6kW Line-Interactive UPS,

Highlights

2.2kVA / 2200VA line interactive

tower UPS system

120V nominal output during

brownouts to 79V and

overvoltages to 147V

Front panel status LEDs with

load and battery capacity level

display

USB, RS232, EPO and slot for

Network Card Options

NEMA 5-20P input; 2 NEMA

5-15/20R & 7 5-15R outlets

Package Includes

SMART 2200VS UPS System,

PowerAlert Software and cabling,

Instruction manual

Tower, Network Card Options, USB, DB9 Serial

MODEL NUMBER: SMART2200VS

Description

Tripp Lite's SMART 2200VS intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage

fluctuations and transient surges. Small footprint, tower UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches. Large

capacity 2200 VA/ 1600 watt rated UPS system offers 7 minutes runtime at full load and 19 minutes at half load during power failures. Line interactive voltage

regulation corrects brownouts as low as 79V and overvoltages as high as 147V to fully regulated 120V nominal output for smooth continuous operation of

connected equipment. Includes a total of 9 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot

remote equipment or shed less critical loads to extend battery runtime for more critical loads. Includes slot for Network Management Card options, such as

Tripp Lite's SNMPWEBCARD, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and

power data. Ships in attractive gray color scheme. Compatible with Tripp Lite's PowerAlert and Watchdog service software.

Features

2200VA/1600 watt output capacity accommodates a variety of server, networking and telecom devices

High power density 2.2kVA UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches

Compatible with North American 120V/60 Hz power as found in the USA, Canada and Mexico

Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA

Intelligent battery management system extends battery life

Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power

9 total outlets(7 NEMA5-15R; 2 NEMA5-15/20R)

Includes NEMA 5-20 straight blade 20 amp input plug connection

Notification of system status via 5 LEDs and multi-function audible alarms

Included PowerAlert Software provides e-mail notification of power problems and the simultaneous automatic unattended shutdown of multiple servers

4 built-in communications ports(2-DB9, 2-USB) for remote monitoring and unattended shutdown

Slot for Network Management Card options, such as Tripp Lite's SNMPWEBCARD

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked

computers by automatically switching UPS power off and back on again

Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current,

battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown,

activate self-test and 10 second reboot of connected equipment

3 pairs of customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment

or shed less critical loads to extend battery runtime for the most critical equipment

Built-in Emergency Power Off(EPO) interface supports emergency shutoff in large facilities

Hot-swappable/user replaceable batteries allow on-site battery replacement without powering off connected equipment

UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary

UL(USA), cUL(Canada), NOM(Mexico), Class A(Emissions)

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 2200

Output kVA Capacity (kVA) 2.2

Output Watt Capacity (Watts) 1600

Output kW Capacity (kW) 1.6

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

Output Receptacles (7) 5-15R; (2) 5-15/20R

Load Management Receptacles Three switchable two-outlet 5-15R load banks

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) PWM sine wave

INPUT

Rated input current (Maximum Load) 16A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-20P

Input Circuit Breakers 20A

UPS Input Cord Length (ft.) 8

110V; 115V; 120V

-18% / +8%

+/- 5%

UPS Input Cord Length (m) 2.4

Recommended Electrical Service 20A 120V

Input Phase Single-Phase