Tripp Lite SMART1500XL User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMART1500XL

SmartPro 1.5kVA Line Interactive UPS, Extended-run option, Tower, USB, Serial, 120V

Highlights

1.5kVA / 1500VA line interactive tower UPS system

120V output, Corrects brownouts and overvoltages from 75V to 147V

Expandable runtime, Status LEDs with load level and battery capacity display

USB & RS232 ports, 1 switched load bank, Hot-swap batteries

NEMA 5-15P input, 6 NEMA 5-15R outlets

Description

Tripp Lite's SMART 1500XL intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment
from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during
power failures. Runtime is expandable with the addition of BP36V15-2U (limit 1) or BP36V42-3U external battery packs. 1500VA/980 watt power
handling capability supports a variety of networking, telecom and various other application types. Includes a total of 6 outlets, 1 of which can be
individually powered on and off via software interface to selectively reboot remote equipment or to shed less significant loads to extend battery
runtime for more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports.
Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Notification of system status via 5 LEDs and
multi-function audible alarms. Wall mountable with UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from
damage and performance problems resulting from transient surges. Attractive, small-footprint tower housing uses less than 66 square inches of floor
or desktop space.

Package Includes

SMART1500XL UPS System
USB and DB9 monitoring cables
PowerAlert unattended shutdown and UPS/Power monitoring software

Features

1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures
Runtime is expandable with the addition of BP36V15-2U or BP36V42-3U external battery packs
Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an
input voltage range of 75-147V
Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot
remote equipment or shed less significant loads to extend battery runtime for more critical equipment
Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions
PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
Notification of system status via 5 LEDs and multi-function audible alarms
Wall mountable with UPSWM wallmount bracket
Attractive small footprint black tower housing uses less than 66 square inches
Built-in rear-exit cooling fan runs as needed to maintain optimal internal temperatures during extended run battery operation
Hot-swappable/user replaceable batteries allow on-site battery replacement
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Cold start capability enables UPS turn-on in battery mode during blackout conditions

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

1500

Output kVA capacity (kVA) 1.5

Output Watt Capacity
(watts)

980

Output power factor 0.7

Nominal Output Voltage(s)
Supported

120V

Frequency compatibility 60 Hz

Output voltage regulation
(line mode)

-18%, +8%

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

6 5-15R outlet(s)

Built-in controllable
switched load banks

One switchable single-outlet 5-15R load bank

Output AC waveform (AC
mode)

Sine wave

Output AC waveform
(battery mode)

PWM sine wave

INPUT

Rated input current (at
maximum load)

12A

Nominal Input Voltage(s)
Supported

120V AC

UPS input connection type 5-15P

Input circuit breaker 15A

UPS Input cord length (ft.) 6

UPS Input cord length (m) 1.8

Recommended Electrical
Service

15A 120V

BATTERY

Full load runtime (minutes) 7 min. (980w)

Half load runtime (minutes) 20 min. (490w)

Expandable battery runtime Extended runtime supported via optional external battery packs

External battery pack
compatibility

BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible)

DC system voltage (VDC) 36

Battery recharge rate
(included batteries)

Less than 4 hours from 10% to 90%