Tripp-Lite SMART1500RMXL2U Specifications

SmartPro® 120V 1.5kVA 1.35kW Line-Interactive

Highlights

Corrects under- and overvoltages

from 83V to 145V

8 NEMA 5-15R outlets—4

switchable via network interface

Network power management and

control capability

Expandable runtime with optional

external battery packs

14 min. runtime at half load; 4.9

min. at full load

Package Includes

SMART1500RMXL2UA

SmartPro 120V 1.5kVA 1.35kW

Line-Interactive Sine Wave UPS

USB cable

DB9 cable

EPO cable

PowerAlert software

Mounting hardware

Owner’s manual

Sine Wave UPS, 2U, Extended Run, Network Card
Options, LCD, USB, DB9

MODEL NUMBER: SMART1500RMXL2UA

Description

The SMART1500RMXL2UA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery

backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage

electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RMXL2UA switches to battery mode in milliseconds to

keep your connected equipment running long enough to save files and shut down safely with no data loss.

Featuring eight NEMA 5-15R outlets(four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RMXL2UA has an internal

battery that provides 14 minutes of support at half load and 4.9 minutes at full load. A front-panel LCD screen lets you monitor important data, such as load

level, voltage, battery charge and estimated runtimes. Adding external battery packs, such as Tripp Lite’s BP36V15-2U(sold separately), provides extended

runtime.

Automatic voltage regulation(AVR) maintains 120V nominal output over an input range of 83V to 145V without using battery power. EMI/RFI noise filtering

improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges.

With Tripp Lite’s included PowerAlert® software, the SMART1500RMXL2UA enables safe unattended system shutdown and file saves in case of a prolonged

power failure. Adding an optional Network Management Card, such as Tripp Lite's SNMPWEBCARD, permits remote management of the UPS, including

reboots and activity logs.

Features

Protects Mission-Critical Rack-Mounted Equipment

Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware

Audible alarm signals loss of utility power, overload, low battery and fault conditions

8 NEMA 5-15R outlets

10 ft. power cord with 120V NEMA 5-15P input

0.9 power factor rating

570-joule surge suppression rating

Reliable Battery Backup with Expandable Runtime

Supports half load up to 14 min. and full load up to 4.9 min.

Internal batteries designed for hot-swap field replacement

95% line-power efficiency rating saves money in energy costs

Expandable runtime with optional external battery packs, such as Tripp Lite’s BP36V15-2U

2 Load Banks with Switchable Outlets

Can control 4 outlets remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation(AVR)

Maintains 120V nominal output over input range of 83V–145V without using battery power

EMI/RFI Line Noise Filtering

Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance

Interactive LCD Screen

Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes

Rotates for easy viewing in rack-mount or tower configurations

SNMP/Web Capability

Optional Network Management Card Options, such as Tripp Lite's SNMPWEBCARD, permits remote management of UPS, including reboots,

configuration, updates and activity logs

Communications Ports

USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system

shutdown and file saves in case of a prolonged power failure

EPO port supports emergency shutdown in large facilities

Versatile Installation Options

Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack

Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory

Mounts in upright tower position with optional 2-9USTAND accessory

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 1500

Output kVA Capacity (kVA) 1.5

Output Watt Capacity (Watts) 1350

Output kW Capacity (kW) 1.35

Output Capacity Details Output is reduced to 1200 watts maximum when used with external battery packs