Tripp-Lite SMART1200XLHGL Data Sheet

SmartPro 120V 1kVA 750W Medical-Grade Line­Interactive Tower UPS with 4 Outlets, Full Isolation, USB, Lithium Battery
MODEL NUMBER: SMART1200XLHGL
Provides UL 60601-1 compliant, medical-grade 1kVA/750W power backup, ideal for use in patient-care vicinities. Lithium Iron Phosphate batteries provide 20–30 times the cycle life of traditional batteries.
Description
Tripp Lite’s SMART1200XLHGL medical-grade UPS system provides dependable lithium iron phosphate (LiFePO4) battery backup, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. It’s fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load and 10 minutes for a full load.
Highlights
28 min. runtime at half load; 10 min. at full load
Reduces cumulative leakage current to under 100 A
Approved for use within the Patient Care Vicinity
Approved to EN60601-1-2:2015 & IEC60601-1-2:2014, 4th Edition
940 joules of surge protection
10,000-cycle LiFePO4 battery
Package Includes
SMART1200XLHGL 1kVA/750W Medical-Grade Tower UPS System
USB monitoring cable, 6 ft.
DB9 serial monitoring cable, 6 ft.
5 yr. warranty on UPS and batteries
Owner’s manual
Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. A built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. It also reduces the cumulative leakage current of connected equipment to less than 100 A. Floating AC output prevents noise coupling from noisy hospital ground systems.
This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup protection and 940 joules of surge protection.
The SMART1200XLHGL also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.
Features
Provides Ideal UPS Backup in Healthcare FacilitiesCompliant with UL 60601-1 standards for use in
patient-care vicinities when plugged into a hospital-grade outletBuilt-in isolation transformer with Faraday shield offers full isolation and reduces cumulative leakage current of connected equipment to less than 100 AHospital-grade NEMA 5-15P-HG plug with 6 ft. cord provides flexibility in placement Battery Backup and Full Surge ProtectionSupports half load for 28 min. and full load for 10 min. with standard LiFePO4 internal batteryHospital-grade NEMA 5-15R-HG outlets provide 940 joules of surge protectionEMI/RFI noise filtering ensures equipment runs smoothly without line noise interferenceResistant to electrostatic discharge10,000-cycle LiFePO4 battery LEDs and Audible Alarms Keep You Aware of Power StatusIndicator lights monitor when the UPS is
1 / 5
on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warningAudible alarms alert you to power failure, overload and low battery conditionsMute/quiet mode ensures “alarm fatigue” compliance Saves Your Files, Even When You’re AwayWorks with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failuresConnects to your computer via DB9 or USB port
Specifications
OVERVIEW
UPC Code 037332192202 UPS Type Line-Interactive
INPUT
Rated input current (Maximum Load) 9.2A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P-HG Input Circuit Breakers 15A UPS Input Cord Length (ft.) 6 UPS Input Cord Length (m) 1.8 Recommended Electrical Service 15A 120V Input Phase Single-Phase Input Cord Length (ft.) 6 Input Cord Length (m) 1.83
OUTPUT
Output Volt Amp Capacity (VA) 1000 Output kVA Capacity (kVA) 1 Output Watt Capacity (Watts) 750 Power Factor 0.8 Frequency Compatibility 60 Hz Output Voltage Regulation (Line
Mode) Output Voltage Regulation (Battery
Mode) Output Receptacle Details Hospital grade output receptacles Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery
Mode)
-18%, +8%
115V (+/- 5%)
PWM sine wave
2 / 5
Loading...
+ 3 hidden pages