Tripp Lite SMART1050SLT User Manual

Download

Page 1

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SMART1050SLT

SmartPro Tower UPS - Intelligent, line-interactive network power management system

Highlights

1050VA / 1.05kVA line-interactive tower UPS system for networks

Maintains sine-wave 120V nominal output over an input range of 95 to 145V

Simultaneous communications via SNMPWEBCARD slot, HID enabled USB

and DB9 serial ports

Free PowerAlert UPS monitoring software manages an unlimited number of

network UPS systems

Input: NEMA 5-15P (120V 15A) / Output: 8 NEMA 5-15R (120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto

Rico & Canada only)

Description

1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave

100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage

variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to

maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA

5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications

via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and

auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility

power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current

monitoring and battery charge status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage

regulation LEDs. Audible alarm. Self-test. Field replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color

scheme. Two-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Applications

Ideal for protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/Internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously regulated output power

Package Includes

SMART1050SLT UPS System PowerAlert Software CD USB and serial cabling Owner's manual with warranty information

Features

SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and overvoltages to 145V

Page 2

Enables continuous operation through blackouts, voltage fluctuations and surges Line-interactive AVR oprovides a 14% boost during brownouts and a 12% voltage cut during overvoltages Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W) Space-saving upright tower format Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, timed inverter sutoff, activate self-test and output power control NEMA 5-15P input plug; 8 x battery-supported NEMA 5-15R output receptacles Front panel LEDs offer current monitoring, voltage regulation and battery charge level information UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required Single-line tel/DSL or network Ethernet line surge suppression 2-year warranty; $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Specifications

SYSTEM OVERVIEW

Voltage compatibility 120V, 100V, 110V (selectable)

Frequency compatibility

50/60Hz

OUTPUT

Output VA 1050

Output watts 650

Output nominal voltage

100, 110, 120 or 127V AC

Output voltage regulation

LINE MODE: Sine wave line voltage 120V (-13%/+15%), BATTERY MODE: Sine wave output 120V (+/-5%)

Output frequency regulation

LINE MODE: Passes line frequency of +/-10% BATTERY MODE: Inverter output regulated to 60Hz (+/- 1Hz)

Outlet quantity / type 8 NEMA 5-15R

INPUT

Maximum input amps

6.1A (120V) / 6.6A (110V) / 7.2A (100V)

Input connection type

NEMA 5-15P

Input cord length 6 ft/1.8m

Recommended Electrical Service

15A 120V

BATTERY

Full load runtime 7 min.

Half load runtime 19 min.

DC system voltage 24VDC

Typical battery lifespan

4-6 years typical

Battery recharge rate Less than 6 hours to 90% after full load discharge

Replacement Battery Cartridge

RBC24-SLT

VOLTAGE REGULATION

Voltage regulation description

Automatic voltage regulation (AVR) circuits maintain clean, regulated computer-grade 120V, 110V or 100V nominal output, without using battery power, during brownouts to 83V and overvoltages to 145V

Page 3

Overvoltage correction

120V: input voltages between 127-145V are reduced by 12% / 110V: Inputs between 116-133V are reduced by 12% / 100V: Inputs between 106-121V are reduced by 12%

Brownout correction 120V: Input voltages between 95-108V are boosted by 14% / 110V: Inputs between 87-99V are boosted by 14% / 100V:

Inputs between 83-90V are boosted by 14%

LEDS ALARMS & SWITCHES

Front panel LEDs 10 front panel LEDs indicate line/battery power status, over/under voltage correction, battery charge level, load

percentage, overload and replace battery

Alarms Audible alarms indicate BATTERY MODE and OVERLOAD, UPS POWERED ON

Switches 2 front panel-mounted switches. POWER ON switch powers UPS on in AC or battery mode when pressed longer than 1

second. POWER ON switch also initiates self-test when pressed longer than 0.5 seconds with the UPS in line power mode. Also serves as an alarm s

SURGE / NOISE SUPPRESSION

AC surge suppression

690 joules

AC suppression response time

Instantaneous

Dataline suppression Includes 8-wire RJ45 jack; pins 1, 2, 3 and 6 provide 10baseT Ethernet line surge suppression with 7.5V clamping; pins

4 and 5 provide single-line tel/DSL line surge suppression starting at 260V

EMI / RFI AC noise suppression

Yes

PHYSICAL

Shipping weight (lbs) 39.6

Shipping weight (kg) 17.82

Shipping Dimensions (HWD/in)

14 x 9.75 x 18.5

Shipping Dimensions (HWD/cm)

35.6 x 24.8 x 47

Unit weight (lbs) 36

Unit weight (kg) 16.2

Unit Dimensions (HWD/in)

10.25 x 6.75 x 13.25

Unit Dimensions (HWD/cm)

26.04 x 17.15 x 33.7

Material of construction

Steel

Form factors supported

Tower

Cooling method Fan

Battery Access Supports battery access and hot-swap replacement without powering connected equipment off

ENVIRONMENTAL

Relative Humidity 0 to 95%, non-condensing

Storage Temperature +5 to +122 degrees Fahrenheit/-15 to +50 degrees Celsius

Operating Temperature

+32 to +104 degrees Fahrenheit/0 to +40 degrees Celsius

Line mode BTU/hr. (Max.)

141 BTU/hr. (max. full load - line power mode)

Battery mode BTU/hr. (Max.)

452 BTU/hr. (max. full load - battery mode)

Audible Noise < 50 dBA @ 1m

Page 4

COMMUNICATIONS

Network monitoring port

Includes 2 built-in monitoring ports, 1 USB and 1 DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, temperature and line frequency status messaging.

Software and cabling included

Includes PowerAlert UPS monitoring software for all common network and stand-alone operating systems. Ships with 2 cables, 1 USB and 1 DB9

SNMP compatibility SNMP adapter accessory # SNMPWEBCARD

WatchDog compatibility

Compatible with Tripp Lite's WatchDog Software to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipmentâideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

4-6 milliseconds

Low voltage transfer to battery power

Switches to battery power as line voltage decreases to 95V (at 120V), 87V (at 110V) , or 83V (at 100V) or less. Resets back to line power mode as line voltage increases to 100V (at 120V), 92V (at 110V), or 87V (at 100V) or higher.

High voltage transfer to battery power

Switches to battery power as line voltage increases to 145V (at 120V), 133V ( at 110V), and 121V (at 100V) volts or higher. Resets back to line power mode as line voltage decreases to 141 (at 120V), 129 (at 110V), or 118V (at 100V) or less

SPECIAL FEATURES

Cold Start Inverter can be cold started to enable temporary AC output during a power failure by pressing and holding the POWER

ON button for longer than 1 second.

Appearance Attractive all-black color scheme

CERTIFICATIONS

Certifications Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), RoHS Compliant, Class B (Emissions), NOM (Mexico), FCC

Part 68 / Industry Canada (telecommunications)

WARRANTY

Product Warranty Period

2 years

Connected Equipment Coverage

$250,000 connected equipment insurance (USA / Canada only)

Optional Coverage 3-year and 5-year extended warranty coverage; next-day and on-site warranty coverage available for select

opportunities

Tripp Lite SMART1050SLT User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual