TRINITY TBFZ-2701, TBFPBR-2701 OWNER’S MANUAL
OWNER’S MANUAL
TRINITY EXPANDABLE CLOSET ORGANIZER
Model # TBFZ-2701 / TBFPBR-2701
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓ N GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D
Your TRINITY Expandable Closet Organizer should include the following parts. Please inspect box
contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will NOT need additional tools for assembly.
PARTS LIST
SMALL SHELF (8)
A
TOP SHELF (2)
B
BAMBOO BOARD (8)
C
HANGING
BRACKET (4)
D
E
SLIP SLEEVE
(80) + (2) extra
F
J
MIDDLE POLE (8)
K
L
TOP POLE (8)
End Cap pre-installed
BOTTOM POLE (8)
Threaded Insert pre-installed
G
HANGING ROD (2)
CONNECTOR (16)LEVELER (8)
© 2021 TRINITY - 800.985.5506
1
H
I
HANGING
SCREW (4)
ANTI-TIPPING
KIT (2)
M
ASSEMBLY INSTRUCTIONS
F
J
K
F
F (4) J (8) K (4)
STEP 1
STEP 2
H (4) A (1)A (1)
Screw each LEVELER (K) into the bottom of
each BOTTOM POLE (F). Turn clock-wise to
screw in place.
Starting from the bottom of the BOTTOM
POLE (F), attach two pieces of black plastic
SLIP SLEEVES (J) on either side of the pole
in the desired groove. Slide the plastic SLIP
SLEEVES (J) down until they click into
position. Repeat for the other three poles.
Tip: Use the grooves on the pole as a guide
to ensure a level shelf height.
A
F
J
K
With the SMALL SHELF (A) on its side, slide
each of the BOTTOM POLES (F) through the
shelf collars.
Stand the unit upright and push down on
the SMALL SHELF (A). Using a rubber mallet
to lightly hammer the SMALL SHELF (A)
down over the collars is helpful but not
necessary.
Note: For stability, the lowest SMALL SHELF
(A) should be installed no higher than the
3rd indentation from the bottom of the
BOTTOM POLES (F).
F
F
F
© 2021 TRINITY - 800.985.5506
2
Loading...