Trinity BAMBOO KITCHEN ISLAND W/ DRAWERS Owner's Manual
OWNER’S MANUAL
48” BAMBOO KITCHEN ISLAND
W/ DRAWERS
E
1
An electric screwdriver is recommended for ease of assembly.
PARTS LIST
A
B
C
TOP (1) LEFT
SIDE FRAME (1)
RIGHT
SIDE FRAME (1)
D
UPPER
SHELF (1)
F
G
LOWER
SHELF (1)
BACK FRAME (1) LOWER SHELF
FRAME (2)
H
DRAWER
DIVIDER (1)
I
J
K
DRAWER BACK
PANEL (2)
DRAWER LEFT
PANEL (2)
L
DRAWER RIGHT
PANEL (2)
DRAWER FRONT
PANEL (2)
Your 48” Bamboo Kitchen Island with Drawers should include the following parts. Please inspect box
contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact our
Customer Service.
PARTS LIST
2
M
DRAWER BOTTOM
PANEL (2)
SCREW
(34) + (2) extra
black
LONG DRAWER
SCREW (16)
DOWEL
(22) + (2) extra
HANGER STUD (7)
NON-LOCKING
CASTER (2)
LOCKING
CASTER (2)
HANDLE (2) HANDLE SCREW (4)
silver
WASHER (4)
SCREWDRIVER (1)
WRENCH (1)
DD
EE
FF
GG
HH
II
JJ
KK
LL
MM
AA
BB
CC
CONNECTOR
SCREW (4)
CAM LOCK (4)
ASSEMBLY INSTRUCTIONS
Lay RIGHT SIDE FRAME (C) on its side. Insert
(2) DOWELS (CC) into each cross beam on
the RIGHT SIDE FRAME (C).
Align holes on UPPER SHELF (D) with
DOWELS (CC) and push onto middle cross
beam on RIGHT SIDE FRAME (C). Align holes
on the LOWER SHELF (E) with DOWELS (CC)
and push onto lower cross beam on RIGHT
SIDE FRAME (C).
Insert (6) SCREWS (AA) through cross beams
of RIGHT SIDE FRAME (C) and fasten tightly
to UPPER SHELF (D) and LOWER SHELF (E)
with SCREWDRIVER (II).
STEP 1
STEP 2
3
AA (6) CC (4)
G (2)
II
E (1)
II (1)
E
AA
CC
G
AA (6) CC (4)
D (1)
C (1)
II (1)
II
AA
CC
D
C
Lay LOWER SHELF (E) on a clean surface with
holes facing up. Insert (4) DOWELS (CC) in the
inner holes as pictured.
Insert (6) SCREWS (AA) through LOWER SHELF
FRAME (G) and fasten tightly to LOWER SHELF
(E) with SCREWDRIVER (II).
E
Orient LOWER SHELF FRAME (G) with our
logo facing out. Align holes on LOWER SHELF
FRAME (G) with DOWELS (CC) and push onto
LOWER SHELF (E).
ASSEMBLY INSTRUCTIONS
STEP 3
Insert (4) DOWELS (CC) in the LEFT SIDE FRAME
(B). Place (2) on each cross beam as shown.
Screw (2) CONNECTOR SCREWS (LL) to LEFT SIDE
FRAME (B) as shown with SCREWDRIVER (II).
Insert (2) CAM LOCKS (MM) to BACK FRAME (F)
with pointer arrow toward from the edge.
Take LEFT SIDE FRAME (B) and align CONNECTOR
SCREWS (LL) to holes in BACK FRAME (F), then
DOWELS (CC) to UPPER SHELF (D), then LOWER
SHELF (E).
Use the SCREWDRIVER (II) to turn CAM LOCKS
(MM) in clockwise direction until BACK FRAME (F)
is pulled tight with LEFT SIDE FRAME (B).
Insert (6) SCREWS (AA) through cross beams of
LEFT SIDE FRAME (B) and fasten tightly to UPPER
SHELF (D) and LOWER SHELF (E) with the
SCREWDRIVER (II).
STEP 4
4
F
AA
B
II
C
E
D
F
MM (2)
F (1)
LL (2)
II (1)
LL
MM
Screw (2) CONNECTOR SCREWS (LL) to RIGHT
SIDE FRAME (C) as shown with SCREWDRIVER
(II). Insert (2) CAM LOCKS (MM) to BACK
FRAME (F) with pointer arrow pointing away
from the edge.
Orient BACK FRAME (F) with insert nuts facing
in and long edge with holes up. Push BACK
FRAME (F) onto the CONNECTOR SCREWS (LL)
against RIGHT SIDE FRAME (C).
Use SCREWDRIVER (II) to turn CAM LOCKS
(MM) in clockwise direction until BACK
FRAME (F) is pulled tight with RIGHT SIDE
FRAME (C).
LL
MM
AA (6) CC (4) II (1)
B (1)
MM (2)
LL (2)
Loading...