Trimble Nomad Orientation Manual
Check the package contents
Remove the unit and all accessories from the box. Confi rm that you have all of
the items listed below. Your confi guration may include additional items.
Install and charge the battery
5. Using the Philips screwdriver end of
the stylus, secure the battery door
6. Plug the charger into power strip or
wall outlet.
3. Charger with outlet adaptor correctly
installed
4. Insert the battery in the battery compartment on the back of the Nomad
1. Select the appropriate outlet
adapter for the AC adapter (charger)
2. Connect the outlet adapter to
the charger
➊
➋
➌
➍ ➎
➏
➐
➒
1. Nomad handheld computer
2. Battery and battery door
3. AC adapter (charger)
4. Hand strap
5. USB cable
6. Stylus
7. Lanyard
8. Screen protectors
9. Getting Started Guide (manual)
10. Getting Started CD
STEP 3
Power on and boot to Windows
1. Press the power button and allow the
Nomad to boot to Windows.
2. The fi rst time you boot up the Nomad, you
will need to align the touchscreen. You
will also have the option of setting up a
password. If you set a password, be sure
it is one you will remember.
STEP 4
Attach the hand strap and screen protector
1. Attach one end of the hand strap
to the hook near the bottom of
the back of the Nomad.
2. Stretch the hand strap toward
the top end of the unit and attach it to the hook near the top.
3. Install the screen protector. Peel
the backing and place the screen
protector over the touchscreen.
Slide the edges of the screen
protector under the bezel to ensure
best fi t. Smooth with the enclosed
installation card if needed to remove
air bubbles.
7. Plug the barrel end of the charger
into the power port on the bottom of
the Nomad.
8. Charge the battery until the battery
LED is green
➓
Tr i m b le N o m a d Orientation Guide
Important!
Be sure to charge the battery
fully (about 4.5 hours) before
operating the unit.
Start here!
STEP 1
STEP 2
➑
STEP 6
2. Insert the card gently into the
slot. DO NOT force the card into
the slot. Both CF and SD cards
should be inserted with the front
of the card towards the front of
the unit.
1. Use the Philips screwdriver
end of the stylus to loosen the
quarter-turn screws and remove
the Expansion Cap.
STEP 5
Orientation
Front View PDA Keypad
Navigation pad
with ”Enter” key
Under the Expansion cap are the expansion slots. Units with no integrated scanner or
camera will have one Type II CompactFlash (CF) slot and one Secure Digital (SD) slot.
Units with a scanner and/or camera will have one SD slot. To access the slots:
4. Reattach the Expansion Cap
with the stylus, making sure the
quarter-turn screws are seated.
3. To remove a CF card, press on
the eject button. To remove an
SD card, gently press on the top
of the card to release it from the
SD slot.
Your unit will have either a PDA-style keypad or a numeric keypad.
Front View Numeric Data Keypad
Back View
Your unit will have either a USB I/O Boot or a Serial I/O Boot
USB Boot
Number pad and
navigation keys
I/O Boot
Expansion Cap
Serial Boot
Serial Boot
Expansion Cap
Notifi cation LED
Application Soft Key*
Start*
Power
Battery LED
Application
Soft Key*
OK*
Today*
Expansion Cap
Notifi cation LED Battery LED
Application Soft Key*
Start*
Power
Tab*
Shift Key*
Application
Soft Key*
OK*
Backspace*
Today*
Enter*
Stylus Holder
Battery Door
Battery Door screws
Mini-USB USBHost Audio Jack External Power Mini-USB Serial External Power
Accessing and using the expansion ports.
SD Slot
CF Slot CF Card Ejector button
8-Pin Custom
(for developers)
© 2007, Trimble Navigation Limited. All rights reserved.
790-0037-XXQ Rev A
* denotes assignable keys
Tr i m b le N o m a d Orientation Guide
Loading...