Trimble HV101 User Manual

Trimble Construction Division

Trimble Construction Division

5475 Kellenburger Road

5475 Kellenburger Road

Dayton, Ohio 45424-1099

Dayton, Ohio 45424

U.S.A.

U.S.A.

[phone] Phone

[phone] Phone

HV101

User Guide

Bedienungsanleitung

Manuel de l´utilisateur

Guida per l´uso

Gúia del usuario

Gebruikershandleiding

Operatörshandbok

Betjeningsvejledning

Guia do Usuário

Bruksanvisning

Käyttäjän opas

Руководство пользователя

www.trimble.com www.trimble.com

© 2008, Trimble Navigation Limited. All rights reserved.

© 2017, Trimble Inc. All rights reserved

PN Q103740 (Rev. E) (10/17)

PN Q103740 (01/08)

Service and Customer Advice

North America

Trimble Construction Division
5475 Kellenburger Road
Dayton, Ohio 45424-1099
U.S.A.
[phone] (Toll Free)
[phone] Phone
[phone] Fax

Europe

Trimble GmbH
Am Prime Parc 11
65479 Raunheim
GERMANY
[phone] Phone
[phone] Fax

Latin America

Trimble Navigation Limited
6505 Blue Lagoon Drive
Suite 120
Miami, FL 33126
U.S.A.
[phone] Phone
[phone] Fax

Africa & Middle East

Trimble Export Middle-East
P.O. Box 17760
Jebel Ali Free Zone, Dubai
UAE
[phone] Phone
[phone] Fax

Asia-Pacic

Trimble Navigation
Australia PTY Limited
Level 1/120 Wickham Street
Fortitude Valley, QLD 4006
AUSTRALIA
[phone] Phone
[phone] Fax

China

Trimble Beijing
Room 2805-07, Tengda Plaza,
No. 168 Xiwai Street
Haidian District
Beijing, China 100044
[phone] Phone
[phone] Fax
www.trimble.com.cn

Q103740 (Rev. E) (10/17)









Thank you for choosing one of the Spectra Precision Lasers from the Trimble family of precision horizontal/
vertical lasers.

The HV101 is a simple-to-use laser that allows you to take accurate horizontal/vertical measurements, 90°­and plumb point transfer.

GB

TABLE OF CONTENTS

FOR YOUR SAFETY 5
COMPONENTS 6

How to Use the Laser System 6
Powering the Laser 6
Laser Setup 6
Turning On/Off the Laser 6
Activating/Deactivating Standby Mode 7
Using the Rotation Mode 7
Using the Pointing Mode 7
Using the Scan Mode 7
Using the Manual Mode 7
Using the Y- or X-Axis Single Slope Mode 7
APPLICATIONS 8

Interior 8
Acoustical Ceilings 8
Drywall and Partitions 8
Transferring Plumb Points to the Ceiling 8
General Construction 8
Determining the Height of Instrument (HI) 8
Using the Y-Axis Single Slope Mode 9
CALIBRATION 9

Checking Calibration of the Y- and X-Axes 9
Checking Calibration of the Z (Vertical) Axis 10
M101 WALL MOUNT 10
PROTECTING THE UNIT 10
CLEANING AND MAINTENANCE 11
PROTECTING THE ENVIRONMENT 11
WARRANTY 11
TECHNICAL DATA 11

FOR YOUR SAFETY

For hazardless and safe operation, read all the user guide instructions.

• Use of this product by people other than those trained on this product may result in exposure to hazardous

laser light.

• Do not remove warning labels from the unit.

• The HV101 is Class 3A/3R (< 5mW, 600 ... 680 nm).

• Never look into the laser beam or direct it to the eyes of other people.

• Always operate the unit in a way that prevents the beam from getting into people‘s eyes.

5