Tribest SW-1000, SW-2000 User Manual
KEEP IT HANDY FOR QUICK REFERENCE AND PROPER CARE
Vertical Slow Juicer and Mincer
Operation Manual
Model: SW-2000 / SW-1000
SAVE THIS MANUAL
®
2
TABLE OF CONTENTS
• Important Safeguards............................................................................4
• Warnings..............................................................................................5
• Precautions...........................................................................................6
• Features...............................................................................................7
• Parts....................................................................................................8
• How to Assemble..................................................................................9
• How to Use...........................................................................................10
• How to Disassemble..............................................................................12
• How to Clean and Store.........................................................................13
• Tips for Silicone Parts........................................................................... 14
• Troubleshooting....................................................................................15
• Warranty..............................................................................................16
• When You Need Service.............................................................................18
Specifications.......................................................................................19
•
• Recipes for Juice..................................................................................21
3
IMPORTANT SAFEGUARDS
WARNINGS & CAUTIONS
Death or serious injury
may occur if the instructions
are not followed.
When using electrical appliances, basic safety precautions should always be employed,
including the following:
1. Read all instructions.
2. To protect against the risk of electrical shock do not put the Main Body of the Slowstar®
in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug the Slowstar® from the electrical outlet when not in use, before assembly
or disassembly of parts, and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged power cord or plug. Do not operate if
the Slowstar® malfunctions, or if the Slowstar® is dropped or damaged in any manner.
Contact the nearest authorized service facility for examination, repair, and/or electrical/
mechanical adjustments.
7. Do not use parts that are not recommended or sold by the manufacturer of the Slowstar®,
as it may cause fire, electric shock, or injury.
8. Do not use outdoors.
9. Do not let the power cord hang over the edge of a table or counter.
10. Do not let the cord come in contact with hot surfaces, including the stove.
11. Always make sure that the Feeding Chute Assembly is locked securely in place
before turning on the Slowstar®. Do not unfasten the Feeding Chute Assembly while
the Slowstar® is in operation.
12. Be sure to turn the switch to the ‘OFF’ position after each use. Make sure the motor
stops completely before disassembling.
13. Do not put your fingers or other objects into the Slowstar® openings while it is in
operation. If food is lodged in the Feeding Chute, use the Plunger or another piece of
fruit or vegetable to push the lodged food down. If the food is still lodged, turn the
Slowstar® off, unplug it, and then disassemble the Slowstar® to remove the remaining food.
14. Do not use the Slowstar® if the Pulp Wiping Assembly is damaged.
15. When a separable pulp container is provided, do not operate without the pulp
container in place.
Physical injury or property
damage may occur if the
instructions are not followed.
SAVE THESE INSTRUCTIONS
4
WARNINGS
• Do not disassemble, fix, or alter the Slowstar
®
; otherwise fire,
electric shock, or injury may occur; contact the seller for repair.
• When the cord or the plug is destroyed or damaged, do not plug
or unplug it into an electrical socket. Contact a licensed electrician
for repair; otherwise electric shock, short circuit, or fire may occur.
• Do not put a foreign obejct into any opening or hole in the
Slowstar®; otherwise fire, electric shock, or injury may occur.
• Do not place the Slowstar
®
near a hot surface or pour water into
the Main Body; otherwise electric shock or injury may occur.
• Close supervision is absolutely necessary when any appliance
is used near children; improper handling or dropping of the
Slowstar® may result in injury or failure of the product.
• While the Slowstar
®
is in use, do not disassemble or insert fingers
or foreign objects into the Feeding Chute or Juice Outlet; otherwise
injury or accident may occur.
• Do not plug/unplug the machine while your hands are wet;
otherwise electric shock or injury may occur.
• Plug in the cord correctly; otherwise electric shock or fire
may occur.
• Use only proper voltage electricity; otherwise, electric shock or
fire may occur. Use a transformer when using a different voltage
electricity.
• Do not bend or tie the cord by force. Do not jerk or place the cord
near high temperatures. Do not place the cord under a heavy object
or plug into a narrow place. Damage to the cord may cause electric
shock or fire.
5
PRECAUTIONS
• The Slowstar
• Do not place any foreign objects, such as forks, knifes, or spoons, into the juice outlet
®
must be operated on even surface; otherwise injury or accident may occur.
under any circumstances; otherwise injury or accident may occur.
• Do not move the Slowstar
®
during operation; otherwise fire, electric shock, or injury
may occur.
• When the Duoblade
™
Auger stops while the Slowstar® is in use, turn the switch to the
‘REVERSE’ position for 2~3 seconds; then push the ‘ON’ button. If the Slowstar® is kept
running when there is an overload, the motor may become overheated and may result in
a malfunction.
• Do not assemble or disassemble the parts while in operation; otherwise a malfunction
or injury may occur. Please assemble or disassemble the parts after stopping the
Slowstar® and unplug the cord from the outlet.
• Do not use any utensil other than Plunger while inserting ingredients into the Feeding
Chute; otherwise injury or accident may occur.
• Do not operate the Slowstar
®
for more than 30 minutes at a time; otherwise the
motor may overheat and a malfunction may occur. Please wait 5 minutes before
operating the Slowstar® again.
• Do not apply excessive impact on the Slowstar
®
or drop it; otherwise electric shock,
impairment, or fire may occur.
• Please unplug the Slowstar
®
when not in use, and do not unplug it by pulling the cord,
otherwise, injury, accident, or malfunctioning may occur.
• Stop operating the Slowstar
®
when strange noises, excessive heat, or smoke is noticed.
Contact the distributor or warranty service center.
• The Slowstar
®
weighs approximately 9 kg, and must be moved using both hands.
You may drop the Slowstar® by moving it with one hand, and injury or a malfunction
may occur.
• Do not wash the Slowstar
®
with water higher than 80°F because if may result in
a malfunction or product variation.
6
FEATURES
• Slow juicing at approximately 47 RPM
The Slowstar® extracts juice using a slow juicing mechanism to retain the maximum
amount of nutrients and enzymes for a naturally healthier juice.
• Mincing and Homogenizing with the Mincer Attachment (SW-2000 only)
With the Mincer Attachment, included with the SW-2000 (not included in SW-1000),
mincing foods is easy and simple. Easily mince foods, from fruits and vegetables
to meats and fish, to make sauces and meat balls.
• Double-Edged Duoblade
Unlike ordinary vertical slow juicers, which have a single-bladed auger, the Slowstar
is equipped with its unique Duoblade™ Auger, which has two blades to cut stringy
™
Auger
®
vegetables, such as celery. The result is juicing with less jamming and improved juice
quality with less pulp mixed into the juice.
• Powerful Motor and Reduction Gears produces the same amount of force
as a 9 HP motor
The high-powered, low-speed motor using a unique 3-stage reduction gear design
is able to generate as much force as a 9 HP motor to crush any tough produce
effectively.
• Low Electricity Consumption
Using the 3 stage reduction gear system, the Slowstar® creates up to 9 HP using only
200 Watts of electricity.
• Easy to assemble & disassemble
The Auger Housing and Main Body detach easily for efficient cleaning and assembly.
• Additional Safety Switch
All parts must be assembled properly. The Feeding Chute Assembly and Auger Housing
must be locked securely in place in order to turn on the Slowstar®, assuring safe operation.
• Quiet operation- Approximately 55 dB
The motor is whisper quiet and extracts juice swiftly and effortlessly.
• Virtually BPA-Free HD Ultem Duoblade
• On/Off/Reverse Switch
• Full 10-year warranty
™
Auger and Juicing Screen
7
PARTS
1
Plunger
2
Cleaning Brush
3
Feeding Chute Assembly
3a
Mincer Lid
4
Double Edged Duoblade™ Auger
5
Juicing Screen
6
Pulp Wiping Assembly
Auger Housing
7
Auger Housing for Mincer
7a
4
7
8
Main Body
9
Juice Container & Pulp Container
10
Power switch
11
Additional Safety Switch Link
Handle
The Main Body, Auger Housing, and Feeding Chute
Assembly must be assembled before the switch is
turned on. (otherwise the Slowstar® will not turn on)
3
Safety
Switch
Auger Housing Lid
5
Hopper
Pulp
Outlet
Juice
Outlet
1
2
3a
6
Rotator
Silicone
Blade
7a
8
WARNING: The Slowstar® will not operate unless the
Main Body, the Auger Housing and Auger Housing Lid
are properly assembled with the inner safety switch.
8
9
11
Safety Link
10
HOW TO ASSEMBLE
Insert the Pressure Plug (located at the
1
1
bottom of the Auger Housing) by inserting
it into the Pulp Outlet properly, as shown in
the picture.
Attach the Auger Housing or Auger Housing
2
for Mincer to the Main Body. Rotate the
2a
housing clockwise towards the Safety
Switch Link.
3
Place the Juicing Screen into the Pulp Wiping
2
Safety Link
Assembly, then assemble the Pulp Wiping
Assembly with the Auger Housing. Assemble
the Auger Housing with the Pulp Wiping Assembly
by aligning the marks on each of the units as shown
in the picture.
4
Place the Duoblade™ Auger into the center of
the Juicing Screen or Auger Housing for Mincer.
4a
Assemble the Feeding Chute Assembly/
5
Mincer Lid. Match the marks on Feeding
Chute Assembly/Mincer Lid to the marks on
Auger Housing/Auger Housing for Mincer, then
rotate the Feeding Chute Assembly towards the
mark on the Handle of Auger Housing as shown
on the picture.
CAUTION: Assemble the Feeding Chute Assembly
last. If the Feeding Chute Assembly is assembled
before the Auger Housing is assembled on the Main
Body, the Auger Housing and the Main Body cannot
be assembled.
2a
3
Marks
4
5
4a
Place both the juice and pulp containers as
6
shown in the picture. The both cups look identical.
Plug the Power Cord into the power outlet.
7
6
7
9
Loading...