Tribest SS9002 User Manual

single-auger juicer

TRIBEST CORPORATION

P.O. Box 4089, Cerritos, CA 90703, USA

(toll free)888-263-6033

(tel) 562-623-7150 (fax)562-623-7160

www.solostarjuicer.com

e-mail:[e-mail]

Important Safeguards

Warranty

Warranty Registration Card

Juicer Part Description

Solo Star Assembly and Operation

Disassembling the Solo Star

When you need service

Cleaning the Solo Star

Trouble Shooting

Recipes Index

3

4

In sert

6

7

8

9

10

10

11

2002 Tribest Corp.

No copies, transmission, or translation into other languages of this manual by any
means without written permission of Tribest Corp. is allowed. All rights are
reserved.

TABLE OF CONTENTS

3

Please read all instructions carefully.
To protect against risk of electric shock, do not submerge motor base in water or other
liquids.
Do not touch the electric plug or outlet with wet hands to avoid electric shock.
While the machine is in operation, avoid contact with its moving parts.
Unplug the appliance from the electrical outlet and be sure to switch the machine off
before assembling or disassembling and when not in use.
Do not operate any appliance: with a damaged cord or plug; after the appliance
malfunctions;, is dropped or is damaged in any manner. Return the appliance to the
nearest authorized service center for examination and possible repair.
Close supervision is necessary when any appliances are used by or near children.
Do not put any articles such as spoons, forks or knives into the feeding chute.
Keep fingers out of the feeding chute while it is in operation. Make sure to always use
the provided plunger to push down materials.
Use of attachments not recommended or sold by the manufacturer may cause fire,
electrical shock or injury.
Do not let the cord hanging over the edge of a table or counter.
Do not let the cord contact any hot surface such as the stove.
Please refer to "When You Need Service" in case your juicer is not functioning
properly.
Do not disassemble any parts other than those necessary for normal operation or
cleaning of your juice extractor
Continuous operation of the machine (more than 30 min. of straight use) might cause
the motor to overheat. The motor will automatically shut down when over-heated or
overloaded. When this occurs, turn the machine off and let the motor cool off for
about 30 min before next usage.
Do not use hot or boiling water (above 40 degree C) to clean the unit and parts. This
may damage the parts.
Do not use any bleach or harsh chemicals.
Do not use outdoors.
This machine is made for household use only.
Please refer to the INSTRUCTIONS before operation.
Your SOLO STAR Juice Extractor should be grounded electrically for proper and safe
operation. Use only the 3-prong plug provided, the proper plug or the adapter
complying with the electrical safety code in your country.
Do not use the appliance for other than its intended use.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

IMPOR TANT SAFEGUARDS

4

SAVE THESE INSTRUCTIONS

We warrant to you, the end-user customer who has properly registered after purchasing the
Solo Star Juice Extractor for a valuable consideration, that the plastic parts and motor will be
free from defects in materials and workmanship for a period of 5 years from the date of
purchase. All other parts, including but not limited to the Juice and Pulp Containers, Plastic
Plunger are not subject to any warranty.

To activate your warranty, you are required to complete and mail the warranty registration
card, containing all the requested information, to us within ten (10) days following the
purchase of your Solo Star.

Warranty

Warranty is only activated after we have actually received the enclosed warranty
registration card, containing all the requested information, within ten (10) days of the
date of original purchase. The warranty is only good for the original purchaser for value.
This warranty is non-transferable.
If the Solo Star exhibits defects while in normal household use, upon receipt of a written
notice of such defects from you during the warranty period, we will, at our option, either
repair or replace the Solo Star Please send the defective machine or parts, , by insured
mail and in protective packaging*, delivered the Solo Star to the location of your service
center as set forth. Solo Star may contain re-manufactured or re-conditioned parts, which
are equivalent to new in performance.
We do not warrant that the operation of the Solo Star will be uninterrupted or error free.
In no event shall our liability exceed the retail value of the Solo Star.
All warranty and repair services must be performed at a warranty service center, which is
located within the country where the machine was originally purchased.
However, in the event that: [i] the machine must be serviced at a service center, which is
not located within the country where the machine was purchased; or [ii] there is no
service center within the country where the machine is located and must be shipped to a
service center in another country, then those service centers are responsible for the parts
and service only, and any and all costs relating to the shipping, delivery and handling of
the machine to and from those service center shall be the sole responsibility of the owner.

1.

2.

3.

4.

5

This warranty does not cover defects resulting from: [a] failure to operate the Solo
Star in accordance with the instructions; [b] use of parts or supplies not provided or
authorized by us; [c] negligent, improper or inadequate maintenance; [d] service
performed or attempted by unauthorized service person; [e] damages, accidental or
otherwise to the Solo Star, which are not directly caused by us or the manufacturer;
or [f] damages resulting from abuse, tampering, misuse, commercial use, or
unauthorized modification of the Solo Star.

WE MAKE NO OTHER EXPRESS OR IMPLIED WARRANTY OR CONDITION
WHETHER WRITTEN OR ORAL TO THE EXTENT ALLOWED BY LOCAL
LAW, ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE OR IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY IS LIMITED TO ONE (1) YEAR. In the event that such
limitation or exclusion on the duration of an implied warranty is not allowed in the
state or county wherein you reside, the above limitation or exclusion will not apply.
This warranty gives you specific legal rights and protection. You may have other
rights that vary from state to state, or country to country.

TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS
WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES.
EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL WE BE LIABLE FOR
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST
PROFIT, OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT,
OR OTHERWISE. Some states or counties may not allow the exclusion or
limitation of incidental or consequential damages. If you reside in such a state or
county, the above limitation or exclusion may not be applicable.

Do not send your Solo Star back to the service center without a return
authorization.

*Save Original Shipping Box

6

JUICER P AR T DESCRIPTION

ON/OFF/Reverse Switch

Juicer Part Description

MainBody

Auger Housing Retaining Ring

Auger Ring

Auger

Electric Cord

Fettuccini Nozzle

Spaghetti Nozzle

Homogenizing Nozzle

Juicing Nozzle

Plastic Plunger

Juicing Screen

Screen Locking Cap

Homogenizing Screen

First Juice Outlet

Second Juice Outlet

First Juice Outlet Plug

Juice Container

Plup Container

Processing Chamber

Auger Housing

Funnel

7

Attach the Auger Ring to the Auger (as seen in the picture) then place the hexagon shaft
of the Auger into the opening of the Auger Housing Retaining Ring.

Slide the Auger Housing over the Auger to the Auger Housing Retaining Ring. While
holding the housing stable, turn the Auger Housing Retaining Ring clockwise (right) to
lock the Auger Housing in place.

Pick the desired screen according to the foods being used and push in.
* Juicing Screen: for juicing leafy greens, vegetables, fruits and nuts.

Place the Juicing Screen into the front end of the Auger Housing. Put the Screen Locking
Cap over the screen and turn it counter-clockwise (while holding the housing stable) to
lock in position. Attach the Juicing Nozzle (the middle sized opening) to the Screen
Locking Cap by turning it counter-clockwise.

Place the First Juice Outlet Plug into the First Juice Outlet by following the
instruction and the drawing.
Attach the Homogenizing Screen into the Auger Housing. Fasten and turn the
Screen Locking Cap counter clockwise to lock in place (while holding the
housing stable).
Place the desired nozzle into the Screen Locking Cap and turn it counter­clockwise.

a.

b.

c.

Do not use the First Juice Outlet Plug. Leave the First Juice Outlet open for
maximum juice yield.
Small amounts of pulp can be in juices depending on the produce used.

* Homogenizing Screen: for making Rice Cake/Breadstick, grinding (tomato, garlic,

coffee beans, etc.), Pasta noodles (Spaghetti or Fettuccini) or Tofu.

1.

2.

3.

SOLO ST AR ASSEMBLY AND OPERA TION