TrendsAudio PW-10 User Manual

Trends PW-10

Power Supply Unit

Version 1.0

Copyright Notice

Copyright © 2006 ITOK Media Limited, All rights reserved.
All rights in this publication are reserved and no part may be reproduced without the
prior written permission of the publisher. The contents of this publication are believed
to be correct at the time of going to press, but any information, specifications, products
or services mentioned may be modified, supplemented or withdrawn without further
notice.

Trademarks
Trends, Trends Audio, and ITOK are the trademarks owned by ITOK Media Limited
All other trademarks are the property of their respective owners.

TTaabbllee ooff CCoonntteennttss

TABLE OF CONTENTS........................................................................................ 2

1. SAFETY INSTRUCATIONS............................................................................. 3

USER GUIDE

2. INTRODUCTION.............................................................................................. 4

3. CONNECTION & OPERATIONS...................................................................... 4

4. FEATURES...................................................................................................... 5

5. OVERVIEW...................................................................................................... 5

6. SPECIFCATION............................................................................................... 6

7. TROUBLESHOOTING..................................................................................... 7

8. ACCESSORIES ............................................................................................... 7

9. CONTACT US .................................................................................................. 7

10. TRENDS COMBO........................................................................................... 8

10.1 Trends Hi-Fi Systems Combo

10.2 Trends Desktop Hi-Fi Systems Combo

1

2 Trends PW-10 PSU User Guide

11.. SSaaffeettyy IInnssttrruuccttiioonnss –– CCaauuttiioonn!!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING -— TO REDUCE THE RISK OF FIRE OR ELECTRIC

22.. IInnttrroodduuccttiioonn

Thank you for your purchase of Trends PW-10 Power Supply Unit

Combined with a newly designed, innovative circuit design and audiophile-grade parts,
Trends PW-10 PSU is the most comprehensive power supply unit package for
supporting Trends TA-10 Class T Amplifier, Trends UD-10 USB Audio Converter and
Trends PA-10 Tube Headphone/Pre-amp

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE. THERE ARE NO USER SERVICEABLE PARTS

INSIDE—REFER TO QUALIFIED SER- VICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

Please read before using your Trends PW-10 Power Supply Unit

1.) It is recommended that you return your Trends PW-10 PSU to us or a qualified
dealer for any service or repair. Incorrect assembly may result in electric shock or fire

2.) To reduce the risk of electric shock, unplug the power supply from the outlet before
attempting any maintenance or cleaning. Turning off controls will not reduce this risk

3.) An extension cord should not be used unless absolutely necessary. If an

extension cord must be used make sure that the pins on the plug are the same
number, size and shape as those of the original power supply plug

4.) Place the unit in an area that will allow air to flow freely around the unit. DO NOT
block or obstruct vent openings on the side/bottom of the unit

5.) Keep the unit away from moisture and water.

WWaarrnniinngg!!

Your power supply should be grounded to reduce the risk of electric shock. The Trends
PW-10 PSU is equipped with grounding conductor and grounding plug.

The cord must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. Never alter the AC cord of plug
provided. If the cord will not fit the outlet, have a proper outlet installed by qualified
electrician. Improper connection can result in risk of electric shock

33.. CCoonnnneeccttiioonn aanndd OOppeerraattiioonn

WARNING! Before plugging the unit to the AC outlet, please check that your local

supply voltage is 110V AC or 220V AC (specific model should be selected, not
compatible)

We provide three cables (Red, Yellow and White) for connecting Trends Audio’s
products including TA-10 Class T Amplifier, Trends UD-10 USB Audio Converter and
Trends PA-10 Tube Headphone/Pre-amp

• Ensure that the Trends PW-10 PSU’s I/O switch is off and it is unplugged from
the AC outlet.

• Ensure that the connections are secure and tight.

• Plug the Trends PW-10 PSU into the AC outlet

• Press the I/O switch of the Trends PW-10 PSU to I and observe that the “Blue”

indicator in the switch illuminates

• If the indicator fails to light, recheck the connection and AC outlet

• Turn on TA and observe that the “Green” indicator, and then switch on Trends

TA-10 Class T-amp series

• Turn on DA/UD and observe that the “Green” indicator, and then switch on
Trends UD-10 USB Audio Converter series or Trends DAC DA-10

• Turn on PA and observe that the “Green” indicator, and then switch on Trends
PA-10 Tube Headphone/Pre-amp series

OPERATE THE UNIT IN A WELL VENTILATED OPEN AND COOL
AREA DO NOT BLOCK THE OPENINGS AT THE FAN DISCHARGE
ON THE BOTTOM AND THE SUCTION OPENINGS ON THE SIDES

3 Trends PW-10 PSU User Guide

4 Trends PW-10 PSU User Guide