Trendnet TVP-SP5G User Manual
Quick Installation Guide
TVP-SP5G
Table of Contents
Table of Contents
English .....................................................................................................
1. Before You Start
2. How to Install .....................................................................................
Answering Phone Calls .....................................................................
3.
Making Phone Calls .......................................................................
4.
Quick Reference Sheet ......................................................................
5.
Troubleshooting ........................................................................................
................................................................................
1
1
2
4
6
9
10
Version 09.28.2006
1. Before You Start
System Requirements
CD-ROM drive
Skype Version 1.1.079 or higher Installed
Computer With An Available USB 1.1 or 2.0 Port
CPU: Pentium 300MHz or Above
Memory: 256 MB or Above
Hard Drive Space: 8MB or Above
Windows 2000/XP
Broadband Internet
Phone jack
Package Contents
TVP-SP5G
Quick Installation Guide
Utility & Driver CD-ROM
RJ-11 Cable
1 Meter USB Cable (mini-USB to
A-type connector)
Note: Skype must be installed before beginning the installation process.
Please visit www.Skype.com for more details.
ClearLink™ VoIP USB
Phone Adapter
(TVP-SP5G)
TM ®
ClearSky Bluetooth
VoIP Phone Kit
TM
(for Skype )
TM
to Clear
Link
TM TM
to ClearLink Skype Phone
TM
Skype Speakerphone
1
English
2. How to Install
1. Insert the Utility & Driver
CD-ROM into your computer's
CD-ROM Drive and then click
Install Utility.
2. Click Next.
3. Follow the InstallShield Wizard
instructions and then click Finish.
4. Select Allow this program to use
Skype. Click OK.
2
English
5. Connect the included USB cable
into the phone, and then connect
the USB cable into an available
USB port on your computer.
6. Drivers will install automatically.
7. Click Yes to restart your computer
(Windows 2000).
8. Connect the phone into the port
labeled Phone.
9. Connect the provided RJ-11 cable
into a phone jack and into the port
labeled Line.
Note: If the computer is on and the device is connected to your phone line, the
device defaults to phone line mode
Your installation is now complete.
For detailed information regarding the TVP-SP5G configuration and advanced
settings, please refer to the User's Guide included on the Utility & Driver
CD-ROM or TRENDnet's website at www.trendnet.com
3
English
Loading...