TVP-SP3
Guide d'installation rapide
UN CD-ROM avec lesutilitaires
Câble USB (mini-USB vers prise de
type A)
Configuration du système
D'un lecteur de CD-ROM
Skype™ installé
Un ordinateur avec une port USB 1.1 ou 2.0 disponible
Microprocesseur : 300 MHz ou supérieur
Mémoire : 256 MB ou supérieur
Espace sur le disque dur : 50 MB ou supérieur
Windows 2000/XP
Remarque : Skype doit être installé avant de débuter le processus d'installation.Veuillez
l'installer depuis le CD-ROM contenant le pilote et l'utilitaire ou visitez www.Skype.com
pour plus de détails.
ClearLink VoIP USB
TM
Phone for Skype
(TVP-SP3)
TM
to Landline Phone
TM
(SkypeOut )
Link
to Clear
TM
Skype Phone
1
Français
TM
to Mobile Phone
TM
(SkypeOut )
Page 4
2. Procéder à l'installation
1. Insérez le CD-ROM avec l'utilitaire et
le pilote dans votre lecteur de CD-ROM et cliquez ensuite sur Install
Driver (Installer l'utilitaire)
2. Cliquez sur Next (Suivant).
3. Suivez les instructions de l’assistant
d’installation et cliquez ensuite sur
Finish (Terminer).
Français
2
Page 5
4. Sélectionnez Allow this program
to use Skype™ (Permettre à ce
programme d'utiliser Skype™).
Cliquez sur OK.
5. Branchez le câble USB fourni sur le
téléphone, et connectez ensuite le
câble USB à un port USB libre de votre
ordinateur.
6. Les pilotes s'installeront
automatiquement.
7. Cliquez sur Yes (Oui) pour débuter
l'installation de l'adaptateur bluetooth.
8. Lancez Skype™ et identifiez vous.
L'installation est maintenant complète.
Si vous désirez davantage d’informations sur les fonctions avancées du
TVP-SP3, veuillez consulter le Guide de l’utilisateur fourni sur le CD-ROM avec
l’utilitaire ou le site Internet de TRENDnet sur www.trendnet.com.
3
Français
Page 6
3. Guide de référence rapide
Icône
S
Hold
0~9, +, #, *
Vol +/-
Fonction
Skype activé/désactivé
Navigation tabs
En attente
Composition
Réponse
Raccrocher/Rejeter
Effacer le numéro
composé
Faire défiler vers le haut
Faire défiler vers le bas
Liste de contacts
Liste des appels
Clavier
Augmenter/
diminuer le volume
Description
Ouvre la fenêtre Skype
Maintenez la touche enfoncée pendant
5 secondes pour fermer la fenêtre de
Skype
Navigation entre les onglets Skype
Met l’appelant en attente
Passer d’un appel à l’autre.
Composition/Recomposition
Réponse à un appel.
Raccrocher/Rejeter un appel
Effacer un numéro
Maintenir enfoncé pendant 5
secondes pour effacer tout le numéro.
Faire défiler vers le haut/le bas
pour sélectionner un contact en
particulier
Afficher la liste des contacts.
Afficher la liste des appels.
Clavier
Ouvrir la fenêtre Skype
Appuyer sur le bouton “0” pendant
5 secondes pour afficher “+”
Augmenter/diminuer le volume du
diffuseur.
Muet
SonnerieSélection de la sonnerie
Désactive le micro.
4
Français
Page 7
Troubleshooting
My computer does not detect the TVP-SP3. What should I do?
Q1:
First, make sure your computer meets the minimum requirements as specified in Section 1 of this
A1:
Quick Installation Guide. Second, make sure the USB cable is physically plugged in as described in
Section 2. Third, try installing the TVP-SP3 to a different USB port of your computer.
I am unable to make a call. What should I do?
Q2:
First, make sure that you have Internet connectivity. Second, make sure that you have signed into
A2:
your Skype™ account. Third, make sure that you see the TVP-SP3 software icon located on the system
tray . If you do not see this icon, go to Start -> Program Files -> TRENDnet -> TVP-SP3. Fourth,
make sure that you have followed the exact steps in section 3 of this Quick Installation Guide.
The speaker/microphone function does not work. What should I do?
Q3:
First, make sure that you have installed the TVP-SP3 VoIP USB Phone software program as
A3:
described in Section 2. Second, right click on the TVP-SP3 software icon located on the system tray
and select Audio Device Settings. Make sure speaker and microphone are set to USB Phone. Third,
right click on the TVP-SP3 software icon and select Volume Settings. Make sure the volume is set
appropriately for the microphone and speaker.
How do I switch back to my computer's original audio settings?
Q4:
Right click on the TVP-SP3 software icon located on the system tray and select Audio
A4:
DeviceSettings. Select the desired Windows Default Audio Device for the speaker and microphone.
Then click OK.
After I finish installing the TVP-SP3, the Skylook installation window appears. What should I do?
Q5:
Skylook is an optional bonus program which integrates with Microsoft® Outlook® (required). It allows
A5:
you to manage your Skype™ contacts from Outlook®. To install the program, select Install Skylook
(recommended) and click Next. Then follow the Install Wizard directions to complete the installation. If
you do not want to install the program, select Don’t Install.
If you still encounter problems or have any questions regarding the TVP-SP3, please refer to the User's Guide
included on the Utility & Driver CD-ROM or contact TRENDnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired operation.
Waste electrical and electronic products must not be
disposed of with household waste. Please recycle where
facilities exist. Check with you Local Authority or Retailer
for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
5
Page 8
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
.....
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com