Quick App-based setup for Apple® and Android™ devices
HD Video
Experience exceptional high definition 720p HD video quality at a full 30
frames per second
Wide View
Wide angle (109⁰ dia.) lens let you see all the movements in the room.
Remote Monitoring
Live video on your Apple® and Android™ mobile devices, tablets, and
computers from any internet connection
Night Vision
See your baby in complete darkness with night vision (7.5 m, 24 ft.)
Two-Way Audio
Hear from and talk through the camera with the built in microphone and
speaker
Features
Companion with your baby, pet, or home from any internet connection with
TRENDnet’s WiFi HD Baby Cam, model TV-IP745SIC. After a brief app-based
installation, view exceptional 720p HD video on your Apple® and Android™
mobile devices, tablets, and computers. Calm your baby with the five preinstalled classical lullabies or your own voice using the camera buttons or the
free app. See video in complete darkness with night vision up to 7.5 meters
(24 ft.). Setup motion, sound, or temperature detection to receive video clips
via email.
Calm your baby with the five pre-installed classical lullabies or your own
uploaded voices using the camera buttons or the free app
Digital Zoom
Zoom in by a factor of four
Free Apps
See live video on a mobile device with free Apple® and Android™ apps
TRENDnet User’s Guide TV-IP745SIC
Motion, Sound, or Temperature Detection Emails
Receive snapshots and video clips (up to 15 seconds) of detected motion,
sound, or temperatures via email
Recording
Record video to a Micro SD card (sold separately) or a remote storage device
Built-in Thermometer
See real time room temperature on your mobile device
Cloud Camera
Easy to find unique cloud address. Automatic delivers video to your phone
when changing your connection. (Requires a home wireless network in order
to function.)
Firmware Notification
Convenient firmware update notifications to mobile device
Mounting Base
Adjustable mounting base for flat and vertical surfaces. Included mounting
tape for easier wall mount installation.
Package Contents
TV-IP745SIC package includes:
• TV-IP745SIC
• Multi-Language Quick Installation Guide
• CD-ROM (Utility and User’s Guide)
• Camera mounting accessories
• Power adapter (5V DC, 1A)
If any package content is missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Extended Power Cord
Convenient 3.3 m (10 foot) long power cord provides installation flexibility
Blink in green: Proceed WPS pairing.
Solid amber: Direct Connection is on.
Off: WPS and Direct Connection are both off.
System Status
Blue: System is booting up or no wireless connection. The
boot up time is about 30 seconds from power on.
Solid in green: The system is ready and the Router
Connection is established.
Blink in green: The video is streaming.
Off: The power is off
Ambient Light
Sensor
Detects the brightness in the environment and enable
day/night modes automatically.
Lens/Sensor
The Lens set and image sensor.
IR LEDs
Infra-red LEDs for night vision.
Microphone
Microphone for two way audio.
Base
Camera base for table top or wall mount installations.
Volume Up
Turns up the speaker volume for two way audio and music
playback.
Volume Down
Turns down the speaker volume for two way audio and
music playback.
Music
Play/Pause
Play music from preloaded music bank or microSD card.
You can change the definition in the Web GUI
configuration. The default is set to preloaded music bank.
Press once again to stop the music play.
WPS: Push and hold this button for 3 seconds until
WPS green indicator blinks to start WPS pairing with your
router or AP.
Direct Connection: Push and hold this button for 8 seconds
until Direct Connection amber LED lit/off to turn on/off
Direct Connection.
Power Port
Power socket of camera (5V DC, 1A)
* Use only the adapter that came with your camera
Reset Button
Use a paper clip to push and hold this button for 6 seconds
until the System Status LED starts blinking in
blue to reset your camera
MicroSD Slot
Insert microSD card to save music or recording video.
When you insert the microSD card, please make it facing
forward (the gold fingers facing behind) and using up to
32GB certified microSD card.
There are number of factors involved in a successful camera installation.
Follow the suggested installation steps and go through the check lists. This
guide will help you make your camera installation smoothly and easily.
There are multiple ways to setup and use your camera. The simplest and
intuitive installation is setup your camera with TRENDnet CloudView app on
Android or iOS mobile devices. If you don’t have a mobile device handy, you
can still setup your camera through web administration pages with desktop
PC. Setup your camera on the spot you are going to place your camera is
recommended. With the on site location, you can check whether your
wireless connection is good or not using the site survey tool in the camera
during camera installation.
Moving camera may change the quality of wireless signal, therefore the video
connection. If you move your camera after setup, you may want to go
through the installation process again to make sure the wireless connection
is good. Once your camera is setup in location and connected to the Internet
through the camera configuration steps, secure your camera and power wire
carefully with tapes or other materials.
Plan for installation location
Viewing angle
The TV-IP745SIC is a high definition, wide angle camera with viewing angle
(98 horizontal, 109 diagonal) that provides great coverage and detailed
images. Choose the location where has good angle to shoot the image you
expect to see. The motion detection area should also be considered when
installing the camera.
Safety
Position your camera safe, so it is not trip off by children or pets. Secure the
power cord after installation. Keep the cord out of baby at least 1M (3 feet)
when camera is installed beside the crib.
WARNING: This is not a toy. Please leave any age of child out of reach.
Camera Installation with the TRENDnet CloudView App. (Page 10 for
Android, Page 14 for iPhone or iPad)
Camera Wireless Installation with WPS button (Page 17)
Camera Installation with computer. (Page 19 for Windows System,
Setup Your Camera with TRENDnet CloudView
Mobile App
The video installation guide is also available on the
CD comes with the package (in /Manuals folder) or
on TRENDnet website. (http://www.trendnet.com/
mobile/743_745SIC.html)
For iPhone or iPad, please go forward to “Install Camera with iPhone or iPad”
on page 14
Install Camera with Android Mobile Devices
1. Tap on the Play Store icon to download and
install the TRENDnet CloudView app.
Alternatively, scan this QR code to download
and install the free TRENDnet CloudView app.
3. Enable the Wi-Fi settings on your Android mobile device and connect to
TRENDnet745.
Select CONNECT
2. Connect the power adapter to the TV-IP745SIC and then plug it in. Wait
This unsecured wireless network is just temporary for setup purpose.
After camera setup, this Direct Connect wireless will be closed
automatically. Select YES for now.
TRENDnet User’s Guide TV-IP745SIC
Note:
up message. Just select CANCEL. We don’t need the internet
Your phone is connected to the camera with Direct Connection.
From time to time during the installation, you might get this pop-
connection during installation.
4. Open the TRENDnet CloudView app and agree with the terms of use.
5. The TRENDnet CloudView app will start searching for camera
automatically. If the search has failed, tap on to start searching
9. Tap Close the App to exit the app and reconnect your Android mobile
device to your wireless network. The camera will apply the settings and
then reboot.
Note: The Direct Connection amber light will turned off if the Router Connection
is setting correctly. If the router setting is not correct (miss spelling or bad signal),
the Direct Connection amber light will keep on. Remove the camera setup in the
app and then repeat the installation with above steps again.
If the System Status Indicator stays in blue. Remove the camera setup on the
app. Reset your camera by pushing reset button for 8 seconds until the System Status Indicator lite in blue and then setup your Router Connection again with
above steps.
Note:
If your wireless network was
not found on the list. Tap to
make the search again. It is
recommended to connect to
the network with more than 2
bars of signal strength for
smooth video streaming.
6. Enter the default username and password of admin and then click OK.
7. Enter the new credential for camera login. Enter username up to 30
letters and numbers and new password. Password must be between 8
and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $,%). Tap
to save the change.
8. The app will start searching available wireless networks automatically.
Select your wireless network. Enter the wireless key. And, then tap
to save changes.
9. Tap Close the App to exit the app and reconnect your iPhone or iPad to
your wireless network. The camera will apply the settings and then
reboot.
Note: The Direct Connection amber light will turned off if the Router Connection
is setting correctly. If the router setting is not correct (miss spelling or bad signal),
the Direct Connection amber light will keep on. Remove the camera setup in the
app and then repeat the installation with above steps again.
If the System Status Indicator stays in blue. Remove the camera setup on the
app. Reset your camera by pushing reset button for 8 seconds until the System Status Indicator lite in blue and then setup your Router Connection again with
above steps
WPS is the simplest way to setup your camera wireless connection. Simply
press the buttons and wait for connection setup.
Enable your WPS pairing on your router by pushing and holding WPS physical
button or through web administration. WPS light will indicate the WPS pairing
is ongoing. Within the pairing period (usually 2 minutes), press and hold TV-
IP745SIC’s WPS button (about 3 seconds) until the top WPS light starts
blinking in green. Wait for pairing process patiently.
If the WPS LED blinks quickly and then turned off, that means the WPS pairing
session is closed. No successful WPS pairing was done. You can try the WPS
pairing again or try other ways to setup your camera.
* If the System Status Indicator keeps in blue and never turning green, your camera
is disconnected on both connections. Push and hold the WPS button 8 seconds until
the Direct Connection amber light on to turn Direct Connection wireless back on. Or,
use a paper clip to push and hold reset button for 6 seconds until the LED turns blue.
Then, start your camera settings again.
If the WPS pairing setup successful, the camera will reboot (you can see the
System Status Indicator turns into blue and then boot up, it takes about 30
seconds) and then the System Status Indicator will turn into solid green. It
means your Router Connection is setup correctly and the camera is ready to
access.
After camera installation, you can install your camera permanently and
securely. You can set up your camera on a cabinet, table or on the wall. Simply
put on two mounting tapes included in the package to fix the position on the
cabinet or on the wall. (If you mount your camera on the wall with only the
mounting tape, please make sure the wall is clean, dust free and always dry.
If the surface of the wall is not suitable for mounting tape, please use included
wall mount screws to secure your camera.)
The TV-IP745SIC comes with two sets of installation screws. Mark the screw
position. Use 1/2 or 7/16 drill to drill holes (about an inch in depth for brick
walls). Pull up the camera so to leave the room for temperature sensor. Then
simple put on your TV-IP745SIC.
Secure the power line after installation to prevent your kid or pet to be
tripped off.
The Direct Connection is turned on with no security
settings by default. The camera network address is
192.168.30.30
Router
Connection:
The Router Connection is turned off by default.
Administrator
name:
admin
Administrator
password:
admin
Access your Camera through the Web Browser
System Management and Default Settings
It is recommended that you install your camera with the TRENDnet
CloudView app. If you don’t have an Android device, iPhone or iPad handy,
you can access the TV-IP745SIC directly via the web browser from computer.
If you didn’t go through the TV-IP745SIC initial setup or you have reset the
TV-IP745SIC to factory defaults by pressing and holding reset button for over
6 seconds, your TV-IP745SIC has following settings:
If you want to access your camera directly instead of using mobile app, you
can follow the steps below to login to your camera. A web browser plug-in
must be installed to watch the video.
For Windows system, please go to the next paragraph. For OS X system,
please go directly to page 15.
Log-in to the Camera for the First Time on Windows PC
1. a) If you have a camera with factory default settings. Connect your
computer to default Direct Connection. Look for TRENDnet745 wireless
station and connect to it. No
password required. Open the web
browser on your computer. In the
address bar, enter the IP address
192.168.30.30, and then press
Enter.
b) If you have already setup your camera with TRENDnet CloudView app
or WPS, connect your computer to you home network and look for the
camera by browsing your Network in File Explorer and then double click
the icon to visit the camera. (If your
computer does not configured to find
sharing resources, you can reference
“Turn on network discovery on
Windows” on page 63.) Or, you can
find the camera IP address assigned
by your home gateway by visiting home gateway’s web management
page, and then press Enter.
2. Enter the default user name,
admin, and default password,
admin, or the user name and
password you setup through the
installation, and then click OK.
Easy to be remembered name between 1 and 30
letters and numbers. This is the only account which
can change the camera settings.
Old Password:
The default password is admin
New Password:
Enter a secured strong password between 8 and 16
characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $, %)
Confirm New
Password:
Confirm the password again.
If your camera has not been set up for Router Connection.
Please keep go on to the next section to set up the Router
9. (Go to step 11 if you already setup your camera with
TRENDnetCloudView). TV-IP745SIC is cloud service enabled. Please
review and then check Accept to the TRENDnet cloud service term of
use. Then click Next to continue.
10. Change your administrator login information away from the default. You
can change both user name and password.
Wait 10 seconds for the system applying the change. Then click Login.
11. Enter your new administrator credential, Live View page will show up and