TRENDnet User’s Guide
Cover Page
© Copyright 2021 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Table of Contents
Product Overview ........................................................................... 2
Package Contents .......................................................................................................... 2
Features ......................................................................................................................... 3
Product Hardware Features........................................................................................... 4
Application Diagram ...................................................................................................... 6
Initial Setup .................................................................................... 7
Creating a Home Network ............................................................................................. 7
Router Installation ......................................................................................................... 8
TRENDnet MESHnet Settings ......................................................... 11
Internet Settings .......................................................................................................... 13
WiFi .............................................................................................................................. 13
Guest Network ............................................................................................................. 13
QoS .............................................................................................................................. 14
Parental Controls ......................................................................................................... 16
Content Filtering .......................................................................................................... 17
Advanced ..................................................................................................................... 19
Signal Strength ............................................................................................................. 20
Technical Specifications ................................................................ 21
Troubleshooting ........................................................................... 23
© Copyright 2021 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Product Overview
TEW-832MDR
TEW-832MDR2K
Package Contents
TEW-832MDR package includes:
• TEW-832MDR (Remote Node)
• Quick Installation Guide
• Power adapter (12V DC, 1A)
• Wall mount screws
TEW-832MDR2K package includes:
• 2 x TEW-832MDR (1 x Main, 1 x Remote)
• Quick Installation Guide
• 1 x Network cable 0.5m (1.6 ft.)
• 2 x Power adapter (12V DC, 1A)
• Wall mount screws
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
© Copyright 2021 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Features
TRENDnet's AC1200 WiFi EasyMesh Kit is designed to blanket your home or small office
in seamless WiFi coverage. The AC1200 WiFi EasyMesh System provides ample coverage
for up to a 4,000 square foot home. For larger homes, simply add additional AC1200
WiFi Mesh Node to the system for expanded WiFi coverage.
The WiFi EasyMesh Kit uses an intuitive app-based installation process, making setup a
breeze using our TRENDnet WiFi Mesh app. In minutes, you'll have your AC1200 WiFi
EasyMesh System up and running providing whole home WiFi coverage.
Mesh Made Simple
The mesh WiFi system uses an intuitive app-based installation process, making setup a
breeze with the TRENDnet MESHnet mobile app
Whole Home WiFi Coverage
The AC1200 Dual Band WiFi EasyMesh Node provides ample coverage for up to a 4,000
square foot area. For larger homes, simply add additional AC1200 WiFi EasyMesh Nodes
(TEW-832MDR) to the system for expanded WiFi coverage
Seamless Smart WiFi Roaming
All EasyMesh nodes broadcast a single WiFi SSID that provides seamless roaming
capabilities. The system intelligently calculates wireless roaming parameters, and
dynamically adjusts in real time to provide optimum signal coverage to connected
clients
Easy WPS Push Button Expansion
To expand coverage easily, add more AC1200 WiFi EasyMesh Nodes (TEW-832MDR) to
the system by using the convenient WPS push button sync method
Band Steering
With band steering technology, the mesh WiFi system alleviates network congestion by
automatically balancing client connections between the 2.4GHz and 5GHz bands
Auto Optimizing
Detects and selects the best path to send data traffic to the desired destination, and
provides better resilience to node failures
Targeted Beamforming
Beamforming increases real-time performance by directing stronger wireless signals to
your specific location. Beamforming improves wireless range, reception, and throughput
Monitor Mesh Signal Status
The TRENDnet MESHnet mobile app allows you to monitor each WiFi mesh node’s mesh
signal status
Intelligent Self-healing Mesh
The EasyMesh kit detects any Mesh node disconnections and intelligently takes action
to remedy the issue
Parental Controls
Limit access to specific websites, and control access to the network for connected
devices
Guest Network
Create an isolated WiFi network for guest internet access
LED Signal Indicator
LED signal indicator helps in locating an EasyMesh node by showing mesh signal quality
in real-time
Gigabit Ports
1 x Gigabit WAN Port, 1 x Gigabit LAN Port
© Copyright 2021 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
IPv6
Mesh WiFi system supports IPv6 network
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data
throughput and coverage will vary depending on interference, network traffic, building materials, and
other conditions. For maximum performance of up to 867Mbps, use with an 867Mbps 802.11ac wireless
adapter. For maximum performance of up to 400Mbps, use with a 400Mbps 802.11n wireless adapter.
Multi-User MIMO (MU-MIMO) requires the use of multiple MU-MIMO enabled wireless adapters.
Product Hardware Features
Rear View
Power Port
WPS / Reset
button
LAN 2 Port
WAN/LAN 1
Port
© Copyright 2021 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Item
Description
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
WPS Button (Wi-Fi
Protected Setup) /
Reset Button
Push and hold this button for 3 seconds and release to
activate WPS. The WPS LED on front panel will blink
when WPS is activated. Press and hold this button for
15 seconds and release to reset the unit back to
factory default. All the LEDs will blink when reset
button has been activated
Gigabit WANLAN 1
Port
Connect an Ethernet cable from your router Internet
port to your modem.
Gigabit LAN 2 Port
(White)
Connect an Ethernet cable (also called network cable)
from your router LAN ports to your wired network
device such as a computer.
© Copyright 2021 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Front View
LED Indicator
Description
Power
Solid – The unit is powered on
Pair Blinking – Device is applying configuration settings.
Solid – Device is operating normally.
WPS
Blinking – WPS mode is enabled.
WiFi
Solid – WiFi is activated
Blinking – Data is being transmitted over WiFi
WAN/LAN
Solid – A stable connection between the router and
the modem
Blinking – Data is being transmitted
LAN2
Solid – A stable connection between the router and
the device
Blinking – Data is being transmitted
Application Diagram
LED Indicators
© Copyright 2021 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Initial Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
• Modem – Connects a computer or router to the Internet or ISP (Internet Service
Provider).
• Router – Connects multiple devices to the Internet.
• Switch –Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Ethernet ports on your router, you will need an
additional switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
• Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
• A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
• A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 11.
5. To set up wireless security on your router, see “Wireless Networking and Security” on
page 13.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 9 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
• http://www.trendnet.com/support (documents, downloads, and FAQs are
available from this Web page)
© Copyright 2021 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide
TEW-832MDR / TEW-832MDR2K
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Obtain IP Address Automatically (Dynamic IP/DHCP)
Host Name:_______________ (Optional, if required by ISP for Compatibilty)
Primary DNS Server Address: _____. _____._____._____ (Optional)
Secondary DNS Servers Address : _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
2. Static IP/Fixed IP address
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Default Gateway IP Address: _____. _____._____._____
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Servers Address : _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
3. PPPoE Dynamic IP (DHCP) / PPPoE Static IP
Type (Dynamic IP/DHCP or Static IP)
IP Address (Static IP): _____. _____._____._____ (e.g. 215.24.24.129)
Username: _________
Password: ________________
Service Name: _________________ (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
Reconnect Mode: Always / On Demand / Manual (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
4. PPTP
Type (Dynamic IP/DHCP or Static IP)
PPTP IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
PPTP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0)
PPTP Gateway:_____. _____._____._____ (e.g. 215.24.24.1)
PPTP Server: _____________________ (e.g. 215.24.24.150)
Username: _________
Password: ________________
Reconnect Mode: Always / On Demand / Manual (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
MPPE (Microsoft® Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No)
5. L2TP
Type (Dynamic IP/DHCP or Static IP)
L2TP IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
L2TP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0)
L2TP Gateway:_____. _____._____._____ (e.g. 215.24.24.1)
L2TP Server: _____________________ (e.g. 215.24.24.150)
Username: _________
Password: ________________
Reconnect Mode: Always / On Demand / Manual (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
MPPE (Microsoft® Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No)
Loading...