TRENDnet TPE-TG80G Installation Guide

Ÿ8-Port Gigabit PoE+ Switch

TPE-TG80g

Ÿ Quick Installation Guide (1)

TPE-TG80g (V3) /01.23.2015

1. Before You Start

LED Color Definition

Green

Off

Red

Device is on

Device is off

If the switch detects there is 7.5W of power or less available, this LED will light up.
This indicates a power overload.

If the switch detects there is more than 7.5W of power available,
the LED will not light up.

Power

PoE Max

Off

Green Power successfully supplied to a PoE device.

The switch has failed to provide power.

No Powered Device connected.

PoE Status

The port is connected to an active Ethernet / Fast Ethernet device.

The port is connected to an active Gigabit device.

Green

Off

Green

Amber

LINK/ACT

Port is disconnected / No Link.

Off

Sequence

Solid

Off

Solid

Off

Solid

Blinking

Off

Solid

Solid

Off

Blinking

Blinking

Activity is occurring from the link.

Activity is occurring from the link.

Package Contents

ŸTPE-TG80g
ŸMulti-Language Quick Installation Guide
ŸPower cord
ŸPower adapter (54V DC, 2.77 A)

Minimum Requirements

ŸComputer with network adapter installed
ŸRJ-45 network cable
Ÿ The surface must support at least 430g for the Switch.
Ÿ The power outlet should be within 1.82 meters (6 feet) of the switch
ŸMake sure that there is proper heat dissipation from and adequate ventilation around the switch
Ÿ Do not place heavy objects on the switch

2. LEDs

1