Der TPE-S88 verfügt über acht 10/100 MBit/s Power-over-Ethernet-Ports und
acht 10/100-MBit/s-Ports. Er ist außerdem mit 5 verschiedenen LED-Arten zur
Anzeige von Stromversorgung, Prozessoraktivität, Netzwerkaktivität,
Datenübertragungsrate und PoE-Status ausgestattet.
Stromversorgung
Prozessoraktivität
Netzwerkaktivität
Datenübertragungsrate
PoE-Status
2
10/100 MBit/s
Power-over-
Ethernet-Ports
10/100-MBit/s-Ports
Deutsch
Page 5
3. Installation der Hardware
Verbinden Sie den TPE-S88 über das Stromkabel mit einer Steckdose.
3
Deutsch
Page 6
4. Konfiguration des PoE Web-Smart-Switch
Hinweis: Benutzer von Macs ändern bitte die IP-Adresse des
Computers auf 192.168.0.X (X ist eine beliebige Nummer von 1 bis
253) und geben in den Webbrowser 192.168.0.1 ein, um auf das
Internetprogramm des Druckservers zugreifen zu können.
Für Benutzer von Windows
1. Legen Sie die CD des TPE-S88 in das CD-ROM-Laufwerk Ihres Computers
ein.
2. Klicken Sie auf Start Run (Ausführen). Geben Sie D:\Web-Management
Utility\setup.exe ein. Wenn die Bezeichnung für Ihr CD-ROM-Laufwerk nicht
D lautet, geben Sie die entsprechende Bezeichnung ein (z.B. E:\Web-
Management Utility\setup.exe).
3. Klicken Sie auf Next (Weiter).
4. Klicken Sie auf Next (Weiter).
4
Deutsch
Page 7
5. Klicken Sie auf Next (Weiter).
6. Klicken Sie auf Next (Weiter).
7. Klicken Sie auf OK.
5
Deutsch
Page 8
8. Klicken Sie auf Start All Programs (Alle Programme)
Web_Management_Utility. Klicken Sie auf das Symbol
Web_Management_Utility.
9. Klicken Sie auf Discovery (Suche). Markieren Sie den ermittelten Switch und klicken Sie auf Configuration settings (Konfigurationseinstellungen).
10. Geben Sie die IP-Adresse Ihres bestehenden Netzwerks ein. Geben Sie
den Default Gateway ein (d.h. die lokale IP-Adresse Ihres Routers). Geben
Sie ein Kennwort ein und klicken Sie dann auf Set (Festlegen).
6
Deutsch
Page 9
11. Doppelklicken Sie auf den ausgewählten Switch.
12. Doppelklicken Sie in der Monitor List (Überwachungsliste) auf den
ausgewählten Switch.
7
Deutsch
Page 10
13. Geben Sie Ihr Kennwort ein. Klicken Sie auf Login (Anmelden).
Weitere Informationen zu allen Funktionen des Web-Smart-Switch finden Sie in
der Bedienungsanleitung.
8
Deutsch
Page 11
Troubleshooting
After connecting the TPE-S88 to a power outlet, the LEDs do not turn on?
Q1:
Please check the following connections:
A1:
1. Double check the connection of the power cord to the TPE-S88.
2. Double check the connection of the power cord to the power outlet.
3. Double check that the power outlet is receiving power.
When I access the TPE-S88 using a web browser, I get a screen that tells me “only
Q2:
one user can login”. What do I do?
Another computer is configuring the TPE-S88. Please wait until the user logs off.
A2:
After the user logged off from the web configuration page, I try to login into the
Q3:
TPE-S88, but I still get a screen that tells me “only one user can login.”
Disconnect the power cord from the TPE-S88. Wait for 5 seconds and
A3:
reconnect the power cord to the TPE-S88. Allow another 3-5 seconds for the
switch to power on. Now attempt to access the web configuration page to login.
When I connect a computer to the switch's port, the LINK/ACT LED turns on, but
Q4:
the 100Mbps LED remains off.
When the 100Mbps LED remains off, the computer's connection speed is
A4:
10Mbps. Please consult the User's guide in the CD-ROM for more information.
I connect a PoE device into the switch's PoE port, but the PoE Status LED remains
Q5:
off.
Please check the following connections:
A5:
1. Make sure that the CAT 5 cable is properly inserted into the PoE port.
2. Make sure that the CAT5 cable is properly inserted into a PoE device.
If you have further questions, please contact Trendware's Technical Support Department.
Contact Technical Support
Telephone: +1-310-626-6252
Fax: +1-310-626-6267
Technical Support Hours
7:00AM ~ 6:00PM, Monday through Friday
Pacific Standard Time (except holidays)
Website: www.TRENDNET.com
E-mail: support@trendware.com
Certifications
This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may cause undesired operation.
9
Page 12
TRENDnet
TRENDware, USA
What's Next in Networking
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDware’s website at http://www.TRENDNET.com