TRENDnet TPE-LG80 User Manual

TPE-LG80

8-Port Gigabit Long Range PoE+ Switch

TPE-LG80 (v1.0R)

• Easy installation

• 8 x Gigabit PoE+ ports

• Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps

• DIP switch supports VLAN port isolation and QoS

• 16Gbps switching capacity

• 65W PoE budget

• Wall mountable design

• Sturdy metal switch

• Use with TRENDnet's PoE splitter to network and power non-PoE devices

The 8-Port Gigabit Long Range PoE+ Switch, model TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP
phones, and IP cameras. It supports both PoE and PoE+ devices with a 65W PoE power budget. Enable the DIP switch to extend the PoE+ signal up to
200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high-speed PoE networking. Its fanless
design is perfect for quiet environments that require silent operation.

TPE-LG80

PoE+ Power

A 65W PoE power budget supports up to
eight Power over Ethernet devices.

Networking Solution

Gigabit

Eight gigabit ports provide a 16Gbps
switching capacity to support edge
network installations.

Long Range PoE+ Switch

Enable the DIP switch to extend the PoE+
signal up to 200m (656 ft.) at 10Mbps.

PoE+

Supplies up to 30W of PoE+ power per
PoE port with a 65W total power budget

Ports

Eight gigabit PoE+ ports

Long Range PoE+ Switch

Enable the DIP switch to extend the
PoE+ signal up to 200m (656 ft.) for long
distance PoE installations

Switching Capacity

16Gbps switching capacity

Housing

Wall mountable metal housing

Port Isolation

Ideal for surveillance networking
applications, the DIP switch also enables
port isolation

LED Indicators

LED indicators convey PoE and port
status