TRENDnet TPE-LG50 Specsheet

TPE-LG50

5-Port Gigabit Long Range PoE+ Switch

TPE-LG50 (v1.0R)

• Easy installation

• 4 x Gigabit PoE+ ports and 1 x Gigabit ports

• Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps

• DIP switch supports VLAN port isolation and QoS

• 10Gbps switching capacity

• 32W PoE budget

• Wall mountable design

• Sturdy metal switch

• Use with TRENDnet's PoE splitter to network and power non-PoE devices

The 5-Port Gigabit Long Range PoE+ Switch, model TPE-LG50, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE)
devices such as access points, VoIP phones, and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 32W PoE budget. Enable
the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for
reliable high speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.

TPE-LG50

PoE+ Power

A 32W PoE power budget supports up to
four Power over Ethernet devices.

Networking Solution

Gigabit

Five Gigabit ports provide a 10Gbps
switching capacity to support edge
network installations.

Long Range PoE+ Switch

Enable the DIP switch to extend PoE+
signal up to 200m (656 ft.) at 10Mbps.

PoE+

Supplies up to 30W of PoE+ power per
PoE port with a 32W power budget

Ports

Four Gigabit PoE+ ports and one Gigabit
ports

Long Range PoE+

Enable the DIP switch to extend the
PoE+ signal up to 200m (656 ft.) for long
distance PoE installations

Switching Capacity

10Gbps switching capacity

Housing

Wall mountable metal housing

Port Isolation

Ideal for surveillance networking
applications, the DIP switch also enables
port isolation on ports 1 – 4

200m (656 ft.)

LED Indicators

LED indicators convey PoE and port
status