TPE-E100
Gigabit PoE+ Repeater
TPE-E100 (v1.0R)
• Extends 100 meters for a total distance of up to 200 meters (656 ft.)
• Daisy chain two TPE-E100s for a total PoE+ network extension of 300 m (980 ft.)
• Plug and play installation
• No external power required
• Wall mountable
• LED indicators
• Rugged metal housing
* Optional power supply required to daisy chain more than the suggested amount of units.
TRENDnet’s Gigabit PoE+ Repeater, model TPE-E100, extends a Gigabit PoE/PoE+ network connection to a remote location. It auto-detects a PoE
(15.4 Watts) or PoE+ (30 Watts) signal and extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the PoE
device. Daisy chain two TPE-E100s for a total PoE network extension of 300 m (980 ft.)*. Handy mounting points and no external power adapter facilitate
remote installations.
TPE-E100
Extension Distance
Extends a PoE/PoE+ network connection an additional 100 (328 ft.)
meters for a total distance of up to 200 meters (656 ft.) from the PoE
device
PoE/PoE+
Auto detects a 15.4 Watt PoE (IEEE 802.3af class 1-4) or 30 Watt PoE+
(IEEE 802.3at) network connection
Gigabit Ports
Gigabit ports extend a high performance wired connection
Daisy Chain
Daisy chain twoTPE-E100s for a total PoE network extension of 300 m
(980 ft.)
Plug and Play
Plug and play PoE/PoE+ network cables
PoE Powered
No external power required—saves installation time and cost
Mounting
Wall mounting points for remote installations
LED indicators
LED indicators confirm PoE and network connectivity
Housing
Rugged metal enclosure
Networking Solution
Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3ab
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 1 x Gigabit PoE/PoE+ in port
• 1 x Gigabit PoE/PoE+ out port
• 1 x Power port (optional power adapter is not included)
• LED indicators
• Installation mounting points
Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
• Gigabit: 2000 Mbps (full duplex)
Performance
• SRAM buffer: 96 KB
• MAC Address Table: 2 K
• Maximum packet length up to 1.5 KB
Special Features
• Extends a PoE/PoE+ network connection an additional 100 meters for a total
distance of up to 200 meters (656 ft.)
• Cascade up to 2 repeaters
TPE-E100
Power
• Powered by PoE/PoE+ Device
• Consumption: 2 Watts (max.)
Optional Power Adapter * (Model Number: 48VDC0750)
• Input: 100-240 V 50/60 Hz 0.75 A
• Output: 48 VDC, 0.75 A
• Consumption: 36 Watts (max. with use of power adapter sold separately)
Operating Temperature
• 0 – 45 °C (32 - 113 °F)
Operating Humidity
• Max. 90% non-condensing
Dimensions
• 75 x 100 x 22 mm (3.0 x 3.9 x 0.9 in.)
Weight
• 228 g (8 oz.)
Certifications
• CE
• FCC
Warranty
• 3 year limited
Package Contents
• TPE-E100
• Quick Installation Guide
* Optional power supply required to daisy chain more than the suggested amount of units.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/3/2015
Loading...