Trendnet TK-V401S, TK-V201S QUICK INSTALLATION GUIDE

Guide d'installation rapide

TK-V201S

TK-V401S

1.01

Table of Contents

Français 1

1. Avant de commencer 1

2. Procéder à l'installation 2

Technical Specifications 8
Troubleshooting 9

Version 05.12.2010

1. Avant de commencer

Contenu de l'emballage

?TK-V201S/TK-V401S

Guide d´installation rapide en plusieurs

ENGLISHFRANÇAISDEUTSCHESPAÑOL

Configuration du système

?2 x Moniteur compatible VGA (TK-V201S) / 4 x Moniteur compatible VGA

(TK-V401S)

?Windows 7(32/64-bit)/Vista(32/64-bit)/XP(32/64-bit)/2000/2003 Server/Me/98SE
?Switch KVM (optionnel)

?

langues

?Adaptateur secteur (9V DC, 0.5A)
?1 câble VGA mâle vers femelle (1.2m/6ft)

РУССКИЙ

1

2. Procéder à l'installation

Branchement d’un seul ordinateur

1. ETEIGNEZ correctement votre ordinateur et
vos moniteurs.

2. Utilisez le câble VGA fourni pour connecter

votre ordinateur au port VIDEO IN du splitter
vidéo (TK-V401S illustré).

ENGLISHFRANÇAISDEUTSCHESPAÑOL

Vers Computer

Vers le splitter vidéo

РУССКИЙ

2

3. Branchez le(s) moniteur(s) à n’importe quels

ports VIDEO OUT (sortie vidéo) du séparateur

vidéo.

ENGLISHFRANÇAISDEUTSCHESPAÑOL

4.Branchez l'adaptateur secteur fourni au splitter

vidéo et ensuite à une prise de courant.

5. ALLUMEZ votre ordinateur et tous les

moniteurs connectés

6. Vérifiez que le voyant Power est allumé.

Connexion au switch KVM

РУССКИЙ

ServerPC Server

3

1. Branchez l'un des câbles VGA fournis au port

VIDEO IN port du splitter vidéo

(TK-V401S illustré).

2. Branchez l'autre extrémité du câble VGA fourni

au port Console du switch KVM.

3. Branchez votre moniteur à un port VIDEO OUT

du splitter vidéo.

4. Branchez l'adaptateur secteur fourni au splitter

vidéo et ensuite à une prise de courant.

5. Consultez le guide d'installation rapide de votre

switch KVM afin de brancher votre ordinateur
au switch KVM.

6. ALLUMEZ votre ordinateur et tous les

moniteurs connectés

ENGLISHFRANÇAISDEUTSCHESPAÑOL

Switch KVM

РУССКИЙ

7. Vérifiez que le voyant Power est allumé.

4

Montage en série

Remarque :

1. Vous pouvez uniquement raccorder en série le séparateur vidéo avec un autre

ENGLISHFRANÇAISDEUTSCHESPAÑOL

TK-V201S ou TK-V401S.

2. Vous pouvez aussi connecter en série 4 séparateurs.

Vers le séparateur vidéo maître

Vers le séparateur vidéo esclave

РУССКИЙ

5

1. Utilisez le câble VGA fournit pour connecter

votre ordinateur ou switch KVM au port VIDEO
IN du premier séparateur vidéo (maître)
(modèle illustré : TK-V401S).

Vers le séparateur vidéo maître

2.Connectez une extrémité du deuxième câble

VGA à l’un des ports VIDEO OUT du premier
séparateur vidéo (maître).

3.Connectez l’extrémité opposée du deuxième

câble VGA au port VIDEO IN du deuxième
séparateur vidéo (esclave).

Switch KVMPC ou

Vers le séparateur vidéo maître

ENGLISHFRANÇAISDEUTSCHESPAÑOL

Vers le séparateur vidéo esclave

6

РУССКИЙ

4. Si vous avez un troisième séparateur vidéo,

connectez une extrémité du câble VGA au port
VIDEO OUT du deuxième séparateur vidéo.
Connectez ensuite l’extrémité opposée du

ENGLISHFRANÇAISDEUTSCHESPAÑOL

câble VGA au port VIDEO IN du troisième
séparateur vidéo (esclave). Répétez l’opération
pour chaque séparateur vidéo supplémentaire.

5. Branchez le(s) moniteur(s) à n’importe quel port

VIDEO OUT (sortie vidéo) du séparateur vidéo.

6. Branchez l’adaptateur secteur fourni à chaque

séparateur vidéo et ensuite à une prise de
courant.

7. Vérifiez que le voyant Power est allumé.

РУССКИЙ

L'installation est maintenant complète.
Enregistrez votre produit

Afin d’être sûr de recevoir le meilleur niveau de service clientèle et le meilleur support
possible, veuillez prendre le temps d’enregistrer votre produit en ligne sur:

www.trendnet.com/register

Nous vous remercions d’avoir choisi Trendnet

7

Technical Specifications

Hardware

Video Input
Video Output

Resolution
Signal Distance

Cable Distance
Daisy-Chain (Cascade)

Cables (included)

Power

LEDs
Dimension

(L x W x H)

Weight

Temperature

TK-V201S
TK-V401S

TK-V201S
TK-V401S

TK-V201S
TK-V401S

8 computers
1 x USB keyboard Type A

2 x 15-pin VGA HDB Female
4 x 15-pin VGA HDB Female

1920 x 1440 Max.
WUXGA, HD, UXGA, SXGA+, SXGA, WSXGA,

WXGA, XGA, SVGA, VGA, QVGA, and Multisync
supported

65 m (210 ft.) max.
Up to 3 levels
1 x 15-pin VGA cable (male to female), 1.2 m (4 ft.)
9V DC, 0.5A
Power

131 x 65 x 26mm (6.3 x 2.5 x 1in.)
205 x 65 x 26 mm (8 x 2.5 x 1 in.)

200g (7.05oz)
400g (14.1oz)
Operation: 0ºC~40ºC (32ºF~104ºF)

Storage: -20ºC~60ºC (-4ºF~140ºF)

Humidity
Certifications

0~90% non-condensing

CE, FCC

8

Troubleshooting

1. My monitors and my PC are on, but I still do not see anything on my monitors.

1. Verify everything is properly connected. See section 2.

2. Verify the power adapter is connected to the video splitter.

3. Verify the Power LED is on.

4. Try plugging the monitor into another Video OUT port.

5. Your monitor could be defective. Try plugging another monitor into the video
splitter

2. Does the video splitter support DVI adapters?

The video splitter does not support DVI-to-VGA adapters.

3. How many video splitters can I daisy-chain together?

You can daisy chain up to 4 video splitters together

4. Does the video splitter support extended desktop?

The video splitter does not support extended desktop. The video splitter supports
cloning only.

If you still encounter problems or have any questions regarding the
TK-V201S/TK-V401S, please contact TRENDnet's Technical Support Department.

9

Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal
use and service, for the following lengths of time from the date of purchase.

AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty

TK-V201S/TK-V401S

If a product does not operate as warranted during the applicable warranty period, TRENDnet
shall reserve the right, at its expense, to repair or replace the defective product or part and
deliver an equivalent product or part to the customer. The repair/replacement unit's warranty
continues from the original date of purchase. All products that are replaced become the
property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet
does not issue refunds or credit. Please contact the point-of-purchase for their return policies.

TRENDnet shall not be responsible for any software, firmware, information, or memory data of
customer contained in, stored on, or integrated with any products returned to TRENDnet
pursuant to any warranty.

There are no user serviceable parts inside the product. Do not remove or attempt to service the
product by any unauthorized service center. This warranty is voided if (i) the product has been
modified or repaired by any unauthorized service center, (ii) the product was subject to accident,
abuse, or improper use (iii) the product was subject to conditions more severe than those
specified in the manual.

Warranty service may be obtained by contacting TRENDnet within the applicable warranty
period and providing a copy of the dated proof of the purchase. Upon proper submission of
required documentation a Return Material Authorization (RMA) number will be issued. An RMA
number is required in order to initiate warranty service support for all TRENDnet products.
Products that are sent to TRENDnet for RMA service must have the RMA number marked on the
outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately
for safe shipment. Customers shipping from outside of the USA and Canada are responsible for
return shipping fees. Customers shipping from outside of the USA are responsible for custom
charges, including but not limited to, duty, tax, and other fees.

- 2 Years Limited Warranty

10

WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION
MAINTENANCE OR USE OF TRENDNET'S PRODUCTS.

TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT
EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE
POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR,
REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION.
THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY
REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law: This Limited Warranty shall be governed by the laws of the state of California.

Some TRENDnet products include software code written by third party developers. These codes
are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License
("LGPL").

http://www.trendnet.com/gpl http://www.trendnet.com

Go to or Download section and look for
the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are
distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.
TRENDnet does not provide technical support for these codes. Please go to

http://www.gnu.org/licenses/gpl.txt http://www.gnu.org/licenses/lgpl.txt

each license.

or for specific terms of

PWP05202009v2

11

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.

Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.

ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.

Product Warranty Registration

Please take a moment to register your product online.

Go to TRENDnet’s website at http://www.trendnet.com/register

Copyright ©2010. All Rights Reserved. TRENDnet.