TRENDnet TK-804R Quick Reference Guide

Command

Hot Keys

Description

Front Panel Button

OSD

TK-804R General Quick Reference Sheet

Show OSD Menu

Next Lower Channel

Select Computer

Next Higher Channel

Next Higher Bank

Next Lower Bank

Activates OSD menu

Select the next lower connected channel. Only works within active bank

Select the next higher connected channel. Only works within active bank

Select the next lower bank when multiple switches are daisy-chained

Resets/reboot/initialize daisy-chain and activates password protection

Select the hot key preceding sequence among 4 alternative keys

(YZ) = 2-digit channel number

(Y) = Scroll Lock, Caps Lock, F12 or Num Lock

Use arrow keys to select and then hit enter

Select the active bank (switch) and channel (computer)

Press push button for a specific port on the switch

—

Page up

Page down

Daisy Chain

Standalone

(YZ) = 2-digit channel number

(AB) = bank number

Scroll Lock

(Y)

Scroll Lock

(A)

(B)

(Y)

(Z)

Scroll Lock

Page Up

Scroll Lock

Page Down

Scroll Lock

Space Bar

Scroll Lock Scroll Lock

(Y)

+ ++

F1 (Setup) Hot key use left and right arrows to select (Scroll Lock, Caps Lock, F12 or Num Lock)

Press port 8 on the KVM switch until you hear 2 beeps, then release the button and press

Define Hot Key Sequence (Default = Scroll Lock + Scroll Lock)

Command

Hot Keys

Description

Front Panel Button

OSD

TK-804R General Quick Reference Sheet

Change Computer Name

Advanced Autoscan Modes

EasyView Group

Autoscan

Stop Autoscan

Autoscan Beep Sound On/Off

Auto Logout Timeout Enable/Disable (0-99 minutes)

OSD Menu Timeout (0~95 seconds)

OSD Title Bar On/Off

OSD Title Bar Position (Left/Right)

Autoscan with Programmable Delay Time

Change the computer name

Select the desired advanced autoscan mode:

ALL – Scan all computer ports Live – Scan all computers with

live power feed EzV – Scan all computers that have been added into the EasyView group EasyView + Live – Scan only those Live computers within the EasyView group. (default setting: all)

Autoscan through your computers (based on the selected advanced autoscan mode)

Specify a delay within a range of 5~95 seconds (default: 10 seconds)

End Autoscan activity

Specify the time out for auto logout – screen/keyboard/ mouse locked after timeout period for security (default/ disable = 0 minute)

Toggle On/Off beep during autoscan mode

Specify the timeout for OSD menu [default: 30 seconds; 0 = disable]

Enable/disable the OSD Title Bar [default:ON]

Select the OSD title bar position on your screen

F6 User left and right arrows to select All, Live, EsV (EasyView Group) and EasyView + Live)

Use the up/down arrow keys to select, then hit Insert to edit

Add or remove the selected computer from the EasyView group

Use the up/down arrow keys to select the desired computer and click F6

—

F1 (Setup) Autoscan period. Use left and right arrows to select

Press any button or key

Scroll Lock

Scroll Lock Scroll Lock

F1 (Setup)Auto Logout. Use left and right arrows to select

F1 (Setup) OSD timeout

F1 (Setup)Title Bar. Use left and right arrows to select

Press any key on keyboard

+ 1 hidden pages