TRENDnet TK-802R, TK-1602R User Manual
Quick Installation Guide
TK-802R
TK-1602R
Table of Contents
Table of Contents
English .....................................................................................................
1. Before You Start
2. How to Install .....................................................................................
3. Operation ...........................................................................................
Troubleshooting .........................................................................................
................................................................................
1
1
2
5
10
Version 11.09.2006
1. Before You Start
System Requirements
PS/2 Keyboard
PS/2 Mouse
VGA Compatible Monitor
KVM Cables
Windows 98/ME/2000/XP/2003 Server, Linux, and Netware
Application
Stand Alone
Monitor
Package Contents
TK-802R/TK-1602R
Quick Installation Guide
Daisy-Chain Cable
Rack-Mount kit
AC Power Adapter (9V DC, 1A)
PC 2
PC 4PC 6PC 8
8/16 Ports Stackable
Rack Mount KVM
Switch with OSD
(TK-802R/TK-1602R)
Keyboard
Mouse
Daisy-Chain
Monitor
MouseKeyboard
Daisy-Chain
PC 5PC 7
1
English
PC 3
PC 1
PC 2PC 4PC 6PC 8
8/16 Ports Stackable
Rack Mount KVM
Switch with OSD
(TK-802R/TK-1602R)
PC 1PC 3PC 5PC 7
2. How to Install
1. Turn OFF all computers and their
peripherals, and then disconnect all
power cords.
2. Use the KVM cables to connect
each computer to the KVM switch.
Note: Do not use the supplied
daisy-chain cable to connect to
your computer. You must purchase
these KVM cables separately.
3. Connect the shared PS/2
keyboard, monitor, and PS/2
mouse to the KVM switch's
Console Port. (TK-1602R shown)
4. Connect the included AC Power
Adapter to the KVM switch and
then to a power outlet.
5. Turn ON the connected computers
one-by-one and wait until each
computer's desktop appears.
2
English
Daisy-Chain
Note:
1. Must use the daisy chain cable provided with the KVM switch
2. Only daisy chain the KVM switch with another TK-802R or TK-1602R.
3. Stackable up to 16 KVM switches
6. Connect one end of the daisychain to the Daisy chain in port on
the first (master) KVM switch.
7. Connect the opposite end of the
daisy-chain cable to the Console
port on the second (slave) switch.
8. If you have a third KVM switch,
connect one end of the daisy chain
to the Daisy chain in port on the
second KVM switch. Then connect
the opposite end of the daisy-chain
cable to the Console port on the
third (slave) switch. Repeat for
each additional switch.
9. Press Port 1 button on the first
(master) switch for 3 seconds to
initialize the daisy chain.
3
English
Loading...