Trendnet TFC-110S30I, TFC-110S15I, TFC-110S60I DATA SHEET
Quick Installation Guide
Intelligent
100Base-LX
Fiber Converters
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. .........................................................................
Hardware Installation
Spefications ..............................................................................................
Ordering Information...................................................................................
Troubleshooting ........................................................................................
.................................................................................
1
1
2
4
5
6
Version 11.27.2006
1. Before You Start
Package Contents
Fiber Converter
Quick Installation Guide
AC Power Supply (7.5 DC, 1.5A)
System Requirements
An environment that is fairly cool and dry
An environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
10/100Mbps Ethernet Switch
Single-mode Fiber cables
CAT-5 RJ-45 Ethernet Cable
TFC-1600 chassis (optional) or sturdy, level surface that can support the
weight of the Fiber Converter
TFC-1600MM (optional)
Note: Management feature requires the TFC-1600 chassis and the TFC1600MM management module.
Product Detail
Model Name
TFC-110S15i
TFC-110S30i SC
TFC-110S60i
Multi/Single-Mode
Single-Mode
(Duplex)
English
Fiber Connector
1
2. Hardware Installation
Installing two stand alone Fiber Converters
1. Connect the fiber cable to the fiber
converters. This cable must be
single-mode.
2. Connect an RJ-45 Ethernet cable
from the Ethernet port on the fiber
converters to an Ethernet port on
your switch (e.g TEG-160WS)
3. Connect the power adapter to the
back of the fiber converter.
Note: The TX and RX cables must be reverse on the opposing fiber
connection.
2
English
Loading...