TRENDnet TFC-1000S60D5 Installation Guide

Fiber Converters

TFC-1000 Series

ŸQuick Installation Guide (1)

ŸTechical Specifications (4)

1. Before You Start

Package Contents

Fiber Converter

Ÿ ŸMulti-Language Quick Installation Guide ŸPower Adapter

If any of the above contents are missing, please contact your reseller.

Minimum Requirements

An environment that is fairly cool and dry

Ÿ ŸAn environment that is free from strong electromagnetic field generators

(such as motors), vibration, dust and direct exposure to sunlight

ŸTFC-1600 chassis (optional) or sturdy, level surface that can support the

weight of the Fiber Converter

ŸGigabit Ethernet Switch ŸMulti-Mode or Single-Mode Fiber cable ŸCat. 5e or Cat. 6 RJ-45 Ethernet Cable

Optional Equipment

Standard 19” rack

Ÿ ŸTFC-1600 chassis ŸMini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,

TEG-MGBS80, TEG-MGBS10D35, TEG-MGBS40D35) for Mini-GBIC slot (TFC-1000MGB/TFC-1000MGA only)

2. Hardware Installation

Installing two standalone Fiber Converters

1. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber

converters to an Ethernet port on your switch (e.g TEG-S24Dg).

2. Connect the fiber cable to the fiber converters.

3. Connect the power adapter to the back of the fiber converter.

Note:

1. For the TFC-1000MSC / S20/ S50 / S70, the TX and RX cables must be reversed on the opposite fiber connection.

2. Cabling

a. Multi-Mode Optic Cable: TFC-1000MSC, TFC-1000MGB/TFC-1000MGA

with TEG-MGBSX module

b. Single-Mode Optic Cable: TFC-1000S20, TFC-1000S50, TFC-1000S70,

TFC-1000MGB/TFC-1000MGA with TEG-MGBS10/TEG-MGBS40/ TEG-MGBS80 module

c. Single Strand Optic Cable for TFC-1000S10D3, TFC-1000S10D5,

TFC-1000S40D3, TFC-1000S40D5, TFC-1000MGB /TFC-1000MGA with TEG-MGBS10D35/TEG-MGBS40D35 module

+ 7 hidden pages