TRENDnet TFC-1000S20 User Manual
TFC-1000S20
Intelligent 1000Base-T to 1000Base-LX Single-Mode
SC Fiber Converter (20km/12.4miles)
TFC-1000S20 (C1.0R)
• SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fiber chassis
• Lifetime Warranty
The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SCType fiber converter that supports SNMP and spans distances up to 20km (12.4miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX
(SC-Type) port.
• Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode SC type fiber port
• Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for Fiber port
• Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link
down information via management module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link/Activity
• Wall mountable
• Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16
TFC series Media Converters
• Lifetime Warranty
TFC-1000S20
Loading...