TRENDnet TEW-755AP Installation Guide

Quick Installation Guide

TEW-755AP

1. Before You Start

Package Contents

Ÿ TEW-755AP
Ÿ 1 x 5 ft. (1.5 m) network cable
Ÿ CD-ROM (User's Guide and Configuration Utility)
Ÿ Quick Installation Guide
Ÿ Power adapter (12V DC, 1A)
Ÿ Mounting kit

Minimum Requirements

Ÿ Computer with network port and web browser
Ÿ Network switch or router with an available network port

Mac Users: Please refer to the User's Guide to manually configure the access point.

2. Web Browser Set-up

1. Connect the TEW-755AP to your router or switch. You may also connect the device directly to a

network port on your computer. If you are connecting to a router or switch, make sure your
computer is connected to the same network.

1

2. If you are connecting your TEW-755AP to a PoE router or switch, the device will power on
automatically. If you are connecting to a computer, or a non-PoE router or switch, you will need to
use the included power adapter.

3. To use the power adapter, plug the power adapter into the TEW-755AP, then plug the adapter
into an electrical outlet. Wait 60 seconds, then confirm that the status LEDs on the front of the
unit are illuminated. Your TEW-755AP access point is now active. The device is pre-configured to
automatically connect to your network, so no further setup is required to use the device.

4. For your security, each TEW-755AP comes pre-encrypted with a unique WiFi Name (SSID) and
WiFi Password. You can find your device's SSID and WiFi Password on the white labels located
on the device. Use this information to connect to the TEW-755AP access point. If the
TEW-755AP is reset, the SSID and WiFi Password will also be reset to the default login
credentials located on the white label.

Preset

Wireless Settings

Wi-Fi Name/SSID

(N/B/G)

TRENDnetXXX_2.4GHz_XXXX

Wi-Fi Password

XXXXXXXXXXXXX

Management Login

http://tew-755ap

username: admin
password: admin

2

5. Insert the CD that was packaged with your TEW-755AP into your computer, and select Software
Controller from the menu.
Note: Software controller only supports Windows based computers. Please visit TRENDnet.com
for a complete list of the Software Controller's supported operating systems.

6. Select your device from the dropdown menu or click on the Discover button to locate your
device.

7. Select your device by checking the box next to TEW-755AP, and click on Device Settings.

3