TRENDnet TEW-734APO User Manual

TEW-734APO

13 dBi Outdoor PoE Access Point (5 GHz)

TEW-734APO (v1.0R)

• Wireless N300 building to building networking (5 GHz)

• Fat AP, Thin AP, Virtual AC, and Virtual AC + Thin AP modes

• Fat AP supports AP, WDS Bridge, WDS Repeater, Client, and CPE + AP modes

• Built-in 13 dBi directional sector antenna

• IP55 rated housing

• Networks to another TEW-734APO or 5 GHz access point

TRENDnet’s 13 dBi Outdoor PoE Access Point, model TEW-734APO, provides wireless N300 (5 GHz) building to building connectivity. It supports Fat
AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes. Fat AP mode supports a variety of
installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes. The rugged IP55 rated TEW-734APO comes
with a proprietary PoE injector and a pole mounting kit.

TEW-734APO

Building to Building

An integrated 13 dBi directional antenna, 5
GHz WiFi N300, and an included PoE injector
facilitate building to building networking.

Installation Flexibility

Fat AP mode supports a variety of installation
scenarios with Access Point (AP), WDS
Bridge, WDS Repeater, Client, and CPE + AP
modes.

Outdoor Ready

Built for protected outdoor locations with an
IP55 weather rating and an operating
temperature range of -20 – 70 °C (-4 – 158 °F).

Networking Solution

TEW-734APO

Multi-Mode Support

Supports Fat AP, Thin AP, Virtual Access Control
(controls compatible Thin AP devices), and Virtual AC
+ Thin AP modes

Fat AP Mode

Fat AP mode supports a variety of installation
scenarios with Access Point (AP), WDS Bridge, WDS
Repeater, Client, and CPE + AP modes

Thin AP Mode

Thin AP mode supports management of the
TEW-734APO by another device (such as another
TEW-734APO or TEW-730APO set to Virtual Access
Control) and operates in Access Point (AP) mode only

Virtual Access Control (AC) Mode

Virtual Access Control mode manages other
compatible access points (TEW-734APO,
TEW-730APO) set to Thin AP

Wireless N300 (5 GHz)

Compliant with 802.11n/a technology (5 GHz
spectrum) with data rates up to 300 Mbps

Directional Antenna

Built in 13 dBi directional antenna

Outdoor Rated

Durable enclosure with an IP55 outdoor weather
rating

Power over Ethernet (PoE)

Comes with a proprietary PoE injector (non-802.3af
compliant)

Logs

Real time logs and statistics help trouble shooting

Encrypted Wireless

Support for wireless encryption of up to WPA2

Mounting Hardware

Pole mounting hardware included

Specifications

Standards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.1d

• IEEE 802.1p

• IEEE 802.1Q

• IEEE 802.1X

• IEEE 802.11a

• IEEE 802.11f

• IEEE 802.11n (up to 300 Mbps)

Hardware Interface

• 1 x 10/100 Mbps (proprietary PoE) port**

• Reset button

• LED indicators

• Grounding point

Special Features

• IP55 weather rated

• 802.1Q VLAN assignment per SSID

Access Control

• Wireless encryption: WEP, WPA/WPA2-PSK,
WPA/WPA2-RADIUS

• Firewall (CPE Mode): NAT, Port Forwarding, DMZ
Host

• Access Controls: MAC, IP Filter, Port Filter, Per­SSID client limiting

• 802.1Q VLAN

QoS

• WMM

• Traffic Shaping

Operation Modes

• Fat AP

• Thin AP

• Virtual AC

• Virtual AC + Thin AP

FAT AP Modes

• Access Point (AP)

• Client

• AP Repeater

• Bridge (WDS)

• WDS Repeater

SSID

• Up to 8 SSIDs

Internet Connection Types (CPE mode)

• Dynamic IP (DHCP)

• Static IP (Fixed)

• PPPoE (Dynamic IP)

Management/Monitoring

• Local/remote web based management (HTTP,
HTTPS)

• Local/remote CLI based management (Telnet,
SSH)

• SNMP v2/v3

• CPE Management

• Upgrade firmware

• Backup/restore configuration

• Event logging

• Syslog

• Reboot

• Restore to factory defaults

• Ping test

• Ping Watchdog

• Trace Route

• STP

• STP forward delay

• Traffic Shaping

• MAC based access control

Frequency

• FCC: 5.15GHz~5.25GHz ; 5.725GHz~5.85GHz

• ETSI: 5.15GHz~5.35GHz; 5.47GHz~5.725GHz

Wireless Channels

• FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165

• ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108,
112, 116, 132, 136, 140

Modulation

• 802.11a: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM

TEW-734APO

• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM

Antenna Gain

• 13 dBi internal directional antenna

Wireless Output Power/Receiving Sensitivity

• 802.11a: FCC/ETSI: FCC: 14 dBm (max.), ETSI:
15 dBm (max.)/ -70 dBm (typical) @ 54 Mbps

• 802.11n: FCC/ETSI: FCC: 17 dBm (max.), ETSI:
15 dBm (max.)/ -62 dBm (typical) @ 300 Mbps

EIRP

• FCC: up to 30 dBm (with built in 13 dBi antenna)

• ETSI: up to 28 dBm (with built in 13 dBi antenna)

Power

• Input: 100 – 220 V, 50 - 60 Hz, 0.6 A

• Output: 24 V / 1 A Consumption: 12 Watts Max.

Operating Temperature

• -20 - 70° C (-4 - 158° F)

Operating Humidity

• Max. 95 % non-condensing

Certifications

• CE

• FCC

Dimensions

• 205 x 64 x 61 mm (8.1 x 2.5 x 2.4 in.)

Weight

• 0.8 kg (1.8 lbs.)

Warranty

• 3 year limited

Package Contents

• TEW-734APO

• CD-ROM (User’s Guide)

• Quick Installation Guide

• Poll mounting hardware

• Proprietary PoE injector (24 V, 1 A)

• Power cord

• Grounding wire

* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather
conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
**Recommended max. PoE cable length of 70 m

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

Updated: 12/17/2015