TRENDnet TEW-671BR Quick Install Guide

Quick Installation Guide

TEW-671BR

1.01

Table of Contents

Table of Contents

English ......................................................................................................

1. Before You Start

2. Hardware Installation .........................................................................

3.

Configure the Wireless Router ...........................................................

Troubleshooting ........................................................................................

.................................................................................

1

1
2
3

7

Version 06.17.2009

1. Before You Start

Package Contents

TEW-671BR

?

Multi-Language Quick Installation

?

Guide
CD-ROM (User's Guide)

?

Cat.5 Ethernet cable (1m / 3.2ft)

?

Power Adapter (12V, 1A)

?

Installation Requirements

A computer with a wired or wireless network adapter properly installed

?

Web Browser: Internet Explorer (6.0 or higher)

?

Broadband Internet

?

Installed Cable or DSL Modem

?

Application

Internet

Workstation with 300Mbps Dual

Band Wireless N USB Adapter

(TEW-664UB)

Workstation with 300Mbps Dual

Band Wireless N USB Adapter

(TEW-664UB)

Wireless n (802.11n) 2.4GHz

300Mbps Dual Band

Wireless N Router

(TEW-671BR)

Media Center

Wireless n (802.11n) 5GHz

1

English

Modem

Laptop with

Wireless N USB Adapter

(TEW-624UB)

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you
start. If necessary, contact your Internet Service Provider (ISP).

1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem.

2. Connect one end of a RJ-45 cable
to the TEW-671BR’s WAN port.
Connect the other end of the cable
to your modem.

3. Connect one end of a RJ-45 cable
to one of the TEW-671BR’s LAN
ports. Connect the other end of the
cable to your computer.

4. Connect the AC Power Adapter to
the wireless router and then to a
power outlet.

Internet

Cable/DSL Modem

5. Verify that the following panel lights
are on: POWER, LAN(1,2,3 or 4),

WAN and WLAN (2.4GHz/5GHz) .

2

English

3. Configure the Wireless Router

Note: It is recommended that you configure the Wireless Router from a wired
computer and your PC's IP address is set to receive an IP address
automatically (see troubleshooting section).

1. Open your web browser, type
http://192.168.10.1 in the
Address bar, and then press Enter.

2. Enter the User Name and
Password, and then click OK.

By default:

User Name: admin
Password: admin

3. Click Wizard.

4. Click Next.

3

English