Quick Installation Guide
TEW-652BRP
H/W: V1.0R
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. Hardware Installation .........................................................................
3.
Configure the Wireless Router ...........................................................
Troubleshooting ........................................................................................
.................................................................................
1
1
2
3
7
Version 06.25.2008
1. Before You Start
Package Contents
TEW-652BRP
?
User's Guide CD-ROM
?
Multi-Language Quick Installation
?
Guide
1 x RJ-45 Ethernet Cable
?
2 x 2dbi Antenna
?
AC Power Adapter (5V, 2A)
?
Installation Requirements
?
A computer with a wired or wireless network adapter properly installed
?
Web Browser: Internet Explorer (5.0 or higher)
?
Broadband Internet
Installed Cable or DSL Modem
?
Application
Wireless N Home Router
(TEW-652BRP)
Notebook with
Wireless N PC Card
(TEW-641PC)
Workstation with
Wireless N PCI Adapter
(TEW-643PI)
300Mbps, share multimedia throughout the house
1
English
Workstation with
Wireless N USB Adapter
(TEW-644UB)
Cable/DSL
Internet
Modem
2. Hardware Installation
Note: Gather all information related to your Internet Connection before you
start. If necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem. Open your browser
(e.g. Internet Explorer) and type in
a URL (e.g.
http://www.trendnet.com) in the
address bar.
2. Connect one end of a RJ-45 cable
to one of the TEW-652BRP’s LAN
ports. Connect the other end of
the cable to the computer's
Ethernet port. Then connect the
2dbi detachable antenna.
3. Connect one end of a RJ-45 cable
to the TEW-652BRP’s WAN port.
Connect the other end of the cable
to your modem.
Internet
Cable/DSL Modem
4. Connect the AC Power Adapter to
the wireless router and then to a
power outlet.
5. Verify that the following panel lights
are on: Power, LAN, WAN and
WLAN.
2
English
Loading...