
TE100-S24plus
24-port 10/100Mbps NWay Switch (Rack Mount)
TRENDnet's TE100-S24plus is a high performance, autosensing 24-port NWay rack-mountable Fast Ethernet Switch.
It is designed to eliminate unnecessary traffic and relieve
congestion on critical network paths. With 10/100Mbps NWay
technology, the TE100-S24plus automatically negotiates
between 10Base-T and 100Base-TX network speeds, as well
as half and full duplex modes. The TE100-S24plus also has a
module bay for optional multimode SC type fiber module that
allows connection to another fiber device up to 2Km away (in
full-duplex mode). The auto MDI-II/MDI-X detection on each
port automatically detects and corrects for crossover
connection and allows direct switch-to-switch or switch-tohub connection for your networking needs.
TRENDnet
TRENDware, USA
What's Next in Networking
FEATURES BENEFITS
24 10/100Mbps NWay Auto MDI-II/MDI-X ports
Integrate address Look-Up Engine, supports up to 4K
absolute MAC address
768KB internal RAM for frame buffering
Full/half duplex transfer mode for each port
Wire-speed filtering/forwarding rates
IEEE 802.3x flow control for full-duplex mode
Back pressure flow control for half-duplex mode
Store-and-forward switching method
Extensive front-panel diagnostic LEDs
One module bay for optional one-port 100Base-FX
multimode SC type fiber connection
Performance:
Top performance at an affordable
price.
Expandability:
Current Ethernet workgroups are able
to upgrade to Fast Ethernet by
changing adapters and hubs without
changing switches.
Flexibility:
All ports automatically negotiate
10/100Mbps network speed, half/fullduplex mode, and MDI-II/MDI-X
connector type.
Expandability:
Optional 100Base-FX multimode SC
type module links to other fiber device
up to 2Km in full-duplex mode.
5 Year Warranty
Cost Effectiveness:
Provide 10/100Mbps of Fast Ethernet
at an affordable rate.
TE100-S24plus (11-17-2002)

TE100-S24plus
TE100-S24plus
24-port 10/100Mbps NWay Switch (Rack Mount)
24-port 10/100Mbps NWay Switch (Rack Mount)
SPECIFICATIONS
Standards:
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/
100Base-FX ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
• 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports
Network Cables:
• Ethernet: CAT 3, 4, 5 UTP/STP
• Fast Ethernet: CAT 5 UTP/STP for 100Base-TX
• Fiber Module: 62.5/125mm multimode fiber-optic with
SC type connector (412 m in half-duplex mode,
2 Km in full-duplex mode)
Protocols:
• CSMA/CD
Data Transfer Rate:
• Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
• Fast Ethernet: 100Mbps (Half-Duplex),
200Mbps (Full-Duplex)
Data RAM Buffers:
• 768KB per device
Filtering Address Table:
• 4K entries per device
Internal Power Adapter:
• 100~240 VAC, Universal Power Supply
Diagnostic LEDs:
• Power, Link/Act, FDX/COL, 100Base-FX
Dimensions:
• 440 x 140 x 44 mm
(17.3 x 5.51 x 1.73 inch) (W x H x D)
Temperature:
• Operating: -10° ~ 50°C (14 ~ 122°F)
• Storage: -10° ~ 70°C (14° ~ 158°F
Humidity:
• Operating: 10% ~ 90% RH
• Storage: 5% ~ 90% RH
Emission:
• FCC Class A, CE Mark A, VCCI-A
NETWORKING SOLUTIONS
To Order Please Call:
1-888-326-6061
PRODUCT INFORMATION
TE100-S16plus: 16-Port 10/100Mbps NWay
Fast Ethernet Switch
TE100-S24plus: 24-Port 10/100Mbps NWay
Fast Ethernet Switch
TE100-S32plus: 32-Port 10/100Mbps NWay
Fast Ethernet Switch
TE100-SFXM: Multimode SC-Type Fiber
Slide-in Module for TE100-S1616/S2424 and
TE100-S16/S16plus/S24plus
ORDERING INFORMATION
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
www.TRENDNET.com
Web:
Email: sales@trendware.com
TRENDnet
TRENDware, USA
R
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
©
http://www.TRENDNET.com.
____________________