Page 1
Chassis Conversion Kit Installation Instructions
Kit contents:
• Rear upper suspension link (assembled with angled rod
ends and hollow balls) (2)
• Rear lower suspension link (assembled with standard
rod ends and hollow balls) (2)
• Front inner fenders (left and right)
• Rear inner fenders (left and right)
• Short female half shaft
• Battery tray
• 3x8mm FCS (4)
Retain and reuse all parts except where indicated ✘
Tools required:
• 2.0mm hex wrench
• 1.5mm hex wrench
84.50mm
123.50mm
B
REAR LOWER LINK (QTY. 2)
84.50mm
127.31mm
A
REAR UPPER LINK (QTY. 2)
Rear Center Driveshaft Assembly
Align Phasing Marks
Driveshaft Length Indicators
SHORT MEDIUM LONG X-LONG
✘
Remove long female
half shaft (stock)
Covers Parts #8058
Install included short
female half shaft
1. Remove shock towers
2578
3x12 BCS
✘
2591
3x23 BCS
2591
3x23 BCS
2579
3x15 BCS
✘
2580
3x20 BCS
2578
3x12 BCS
2580
3x20 BCS
2579
3x15 BCS
2578
3x12 BCS
✘
2591
3x23 BCS
✘
2580
3x20 BCS
2578
3x12 BCS
2591
3x23 BCS
2580
3x20 BCS
2. Install chassis-mounted inner fenders
2580
3x20 BCS
2580
3x20 BCS
3931
3x8 FCS
Right Front
2578
3x12 BCS
3931
3x8 FCS
2578
3x12 BCS
2591
3x23 BCS
2591
3x23 BCS
2578
3x12 BCS
Right Rear
2578
3x12 BCS
Left Front
2591
3x23 BCS
2580
3x20 BCS
2578
3x12 BCS
2580
3x20 BCS
Left Rear
2578
3x12 BCS
2591
3x23 BCS
3. Remove rear center driveshaft and rear suspension links; install new driveshaft
and rear suspension links
Rear Suspension Link Installation
Rear Lower Suspension Links (B)
B
A A B
Rear Upper Suspension Links (A)
2616
3x27 BCS
2582
3x30 BCS
2579
2581
3x25 BCS
3x15 BCS
B
A
2579
3x15 BCS
2579
3x15 BCS
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
2616
3x27 BCS
2579
3x15 BCS
2581
3x25 BCS
KC2606-R01 Rev 180209
Loading...