Traxxas Chassis conversion kit, low CG (Slash) User guide

Low-CG Chassis Conversion Instructions

4X14 BCS
INCLUDED*

4X12 CCS

3X8 FCS

4X12 CCS

3X15 BCS

3.0NL

3X10 BCS

5X8X0.5 TW

3X6X0.5 MW

3X15 BCS

4X12 BCS

3X12 BCS

3X10 CS

INCLUDED*

INCLUDED*

3X12 BCS

(17mm)

SERVO LINK

SHORTEN SERVO LINK AS SHOWN

0.67in.

(47mm)

1.85in.

Covers Part #5830

CHASSIS COMPONENT INSTALLATION VEHICLE ASSEMBLY

3x8 BCS

3x8 BCS

3x8 BCS

3x12 BCS (XL-5 ESC)
3x15 BCS (VXL-3S ESC)

3x6 BCS**

3x15 CCS

3x8 BCS

SERVO MOUNTING POSITIONS

FOR VEHICLES WITH SERVO-MOUNTED SERVO SAVERS

FOR VEHICLES WITH BELLCRANK-MOUNTED SERVO SAVERS

Reversing the direction of the steering servo (TQi transmitter):

1. Press and hold MENU. Green LED blinks.

2. Press MENU. Green LED blinks 2 times.

3. Press SET. Green LED blinks.

4. Press SET. Red LED blinks.

5. Press SET to reverse servo direction. Green LED blinks 8 times.

6. Press and hold MENU.

HIGHER POSITION

LOWER POSITION

SERVO ARM USED WHEN MOUNTING

IN LOWER POSITION

FRONT OF VEHICLE

FRONT OF VEHICLE

*Use existing fasteners except where indicated as INCLUDED
**VXL equipped models only

Traxxas, 6200 Traxxas Way, McKinney, TX 75070,

Reversing the direction of the steering servo (TQ 2.4GHz transmitter):

1. Press and hold SET. Green LED blinks.

2. Turn steering wheel to full left or full right.

3. Hold steering wheel in position.

4. Press SET to reverse servo direction.

TRAXXAS.com

Phone: [phone], Fax: [phone], e-mail: [e-mail]

KC1886-R00 130927