Traxxas Charger EZ-Peak Live Dual 4S 2x100W User guide

Maxx Output

26

200 Watts

+

NiMH / LiPo Fast Charger

owner’s manual

Thank you for purchasing the Traxxas EZ-Peak Live Dual™ charger. This charger features exclusive Traxxas
innovations that make charging batteries easier and safer than ever. If you have any questions or concerns
about your charger, please contact our customer support team for fast, friendly answers and solutions.

WARNING! CAUTION! DANGER!

FIRE HAZARD!

CHARGING AND DISCHARGING BATTERIES HAS

THE POTENTIAL FOR FIRE, EXPLOSION, SERIOUS INJURY, AND PROPERTY
DAMAGE IF NOT PERFORMED PER THE INSTRUCTIONS. BEFORE USE, READ AND FOLLOW
ALL MANUFACTURER’S INSTRUCTIONS, WARNINGS, AND PRECAUTIONS. NEVER ALLOW
CHILDREN UNDER THE AGE OF 14 TO CHARGE OR USE LIPO BATTERIES WITHOUT THE
SUPERVISION OF A RESPONSIBLE, KNOWLEDGEABLE ADULT.

Important warnings for users of Lithium Polymer
(LiPo) batteries:

Lithium Polymer (LiPo) batteries are significantly
more volatile than other rechargeable batteries.

• ONLY use a Lithium Polymer (LiPo) balance charger
with a balance adapter port to charge LiPo batteries.
Never use NiMH or NiCad-type chargers or charge
modes to charge LiPo batteries.
a NiMH-only charger.
charger or charge mode will damage the batteries
and may cause fire and personal injury.

2 • EZ-PEAK LIVE DUAL

The use of a NiMH or NiCad

DO NOT charge with

•

Never charge LiPo battery packs in series or parallel.
Charging packs in series or parallel may result in
improper charger cell recognition and an improper
charging rate that may lead to overcharging, cell
imbalance, cell damage, and fire.

• ALWAYS inspect your LiPo batteries carefully before
charging. Look for any loose leads or connectors,
damaged wire insulation, damaged cell packaging,
impact damage, fluid leaks, swelling (a sign of
internal damage), cell deformity, missing labels, or
any other damage or irregularity.

WARNING! CAUTION! DANGER! (continued)

If any of these conditions (see page 2) are observed,
do not charge or use the battery pack. Follow the
disposal instructions included with your battery to
properly and safely dispose of the battery.

• Do not store or charge LiPo batteries with or
around other batteries or battery packs of any type,
including other LiPos.

• Store and transport your LiPo batteries in a cool
dry place. Do not store in direct sunlight. Do not
allow the storage temperature to exceed 140°F or
60°C such as in the trunk of a car or the cells may be
damaged and create a fire risk.

• Do NOT disassemble LiPo batteries or cells.

• Do NOT attempt to build your own LiPo battery
pack from loose cells.

FIRE HAZARD!

Charging and handling precautions for all battery
types:

• ALWAYS proceed with caution and use good
common sense at all times.

• Charge only NiMH packs or 2s–4s LiPo battery packs.

• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children require
adult supervision while using this charger.

• DO NOT let any exposed battery contacts or wires
touch each other. This will cause the battery to
short circuit and create the risk of fire.

• While charging, ALWAYS place the battery in a
fire retardant/fire proof container and on a non­flammable surface such as concrete.

• DO NOT operate the charger inside of an
automobile.

EZ-PEAK LIVE DUAL • 3

WARNING! CAUTION! DANGER! (continued)

• NEVER charge batteries on wood, cloth, carpet or on
any other flammable material.

• ALWAYS charge batteries in a well-ventilated area.

• REMOVE flammable items and combustible
materials from the charging area.

• DO NOT leave the charger and batteries
unattended while charging, discharging, or
any time that the charger is ON with batteries
connected. If there are any signs of a malfunction or
in the event of an emergency, unplug the charger
from the power source and disconnect the batteries
from the charger.

• Remote monitoring via the EZ-Peak Live App is not a
substitute for being present to watch over and tend
to batteries being charged. Batteries being charged
should always be visible and monitored in person in
case there is an unexpected problem that requires
immediate attention.

4 • EZ-PEAK LIVE DUAL

FIRE HAZARD!

• DO NOT operate the charger in a cluttered space, or
place objects on top of the charger or batteries.

• If any battery or battery cell is damaged in any way,
do NOT charge, discharge, or use the battery.

• Keep a Class D fire extinguisher nearby in case of fire.

• BEFORE you charge, ALWAYS confirm that the
charger settings exactly match the type (chemistry),
specification, and configuration of the battery to be
charged.

• DO NOT exceed the battery manufacturer’s maximum
recommended charge rate.

• DO NOT disassemble, crush, short circuit, or expose
the batteries or cells to flame or any other source of
ignition.

• If a battery gets hot to the touch during the charging
process, disconnect the battery from the charger and
discontinue charging immediately.

• ALWAYS unplug the charger and disconnect the
batteries when not in use.

WARNING! CAUTION! DANGER! (continued)

• Never attempt to charge more batteries than the
charger was designed to charge.

• DO NOT disassemble the charger.

• REMOVE the batteries from your model or device
before charging.

• DO NOT expose the charger to water or moisture.

• ALWAYS store battery packs safely out of the reach
of children and pets.

• If the charger power cord is damaged, it must be
replaced by Traxxas in order to avoid a hazard.

• DO NOT charge batteries under ANY of the
following conditions:

- Batteries that are hot to the touch.

- Batteries that are not expressly stated by the
manufacturer to be suitable to accept the power
output (voltage and amperage) the charger
delivers during the charging process.

FIRE HAZARD!

- Batteries that are damaged or defective in any way.
Examples of damage or defects include,
but are not limited to, batteries with dented cells,
damaged or frayed wires, loose connections,
fluid leaks, corrosion, plugged vents, swelling,
cell deformity, impact damage, melted
components, or any other signs of damage.

- Battery packs that have been altered from original
manufacturer configuration.

- Non-rechargeable batteries (explosion hazard).

- Batteries that have missing or unreadable labels,
preventing you from properly identifying the
battery type and specifications.

EZ-PEAK LIVE DUAL • 5

Updating Firmware

Your EZ-Peak Live Dual charger has the ability to receive firmware updates that can add new features and
capabilities. Firmware updates are performed via the EZ-Peak Live App (see Traxxas EZ-Peak Live Application
on page 16). Traxxas recommends to always keep the charger firmware up to date. Visit Traxxas.com for the
latest firmware updates and instructions for how to install them on your charger.

Know your connectors

Balance Connector Integrated

Balance Wires

First Generation Traxxas
High-Current Connector

WARNING: FIRE HAZARD!

If you have a battery that is labeled as or physically appears to be a LiPo but it does not have a
balance connector, do not attempt to charge the battery.

6 • EZ-PEAK LIVE DUAL

LiPo Balance Connector

(without Traxxas iD)

Traxxas High-Current

Connector with iD

Traxxas High-Current

Connector with iD and

integrated balance wires

(4S shown)

Know your Batteries

The EZ-Peak Live Dual is able to charge two different types (chemistries) of batteries: NiMH and LiPo.
Batteries are normally clearly labeled, but they can also be visually identified as a confirmation step.

NiMH Battery

LiPo Battery

Balance Wires

Traxxas High-Current
Connector with iD

NiMH (Nickel-Metal Hydride)
batteries are constructed using

5, 6, 7, or 8 round battery cells
that are soldered together and
wrapped with heat shrink material.
NiMH batteries do not have a separate
balance wire.

WARNING: FIRE HAZARD!

Do not attempt to charge any battery that
has a missing or unreadable label that
prevents you from properly identifying
the battery type and specifications.

iD LogoBattery Type

Traxxas High-Current

Connector with iD

iD LogoBattery Type

LiPo (Lithium Polymer) batteries

are made from stacks of flat
rectangular cells so the battery
pack is rectangular, blocky, and has
square corners. LiPo batteries also
have balance connectors. For older Traxxas batteries
with first generation High-Current Connectors, the
balance connector and the multi-colored balance
wires are separate. For Traxxas iD batteries, the
balance wires are integrated into the iD High-Current
Connector (see Know your connectors on page 6).

EZ-PEAK LIVE DUAL • 7

Know your Charger

J

Charge
Status

A. Start/Stop Button
B. LiPo Charge Mode Select
C. App Live LED
D. Charge Status LED
E. Charge Progress LEDs

8 • EZ-PEAK LIVE DUAL

D

B

E

D

E

B

F

C

A

I

F. MAXX Charge Button and Indicator
G. Charger Output Ports (Traxxas High-Current Connector)
H. Charger Output Port (USB) (pull to remove cover)
I. 2s/3s/4s LiPo Balance Ports (pull to remove cover)
J. Bluetooth® Button and Indicator LED

G

C

A

G

H

I

Charge
Progress

Charger Specifications

AC Input Power 100-240V, 50-60Hz, 2.35A

Charger Output 200W, 4-17V

Approximate maximum charger output shown using iD batteries. Actual results may vary by battery and voltage.

MAXX Charge Mode**

Traxxas iD

Battery Type

2-cell LiPo, 7.4v 2200-10000mAh 16A 13.4A x 2 16A

3-cell LiPo,11.1v 1400-8400mAh 16A 8.3A x 2 16A

4-cell LiPo, 14.8v 5000-6700mAh 13.4A 6.2A x 2 13.4A

5-cell NiMH* 1200-1800mAh 2A 2A x 2 N/A

6-cell NiMH*

7-cell NiMH*

8-cell NiMH*

*NiMH trickle charge rate is the greater of 100mA or 5% of the “C” rate for 12 hours. **See the “Charging Traxxas iD Batteries using MAXX Charge” section

Capacity

Maximum Current

with single battery

Maximum Current

with dual batteries

Maximum Current Channel
(Right Output Port)

1200-1800mAh 2A 2A x 2 N/A

3000-4200mAh 4A 4A x 2 N/A

4300-5000mAh 5A 5A x 2 N/A

3000-4200mAh 4A 4A x 2 N/A

4300-5000mAh 5A 5A x 2 N/A

3000-4200mAh 4A 4A x 2 N/A

4300-5000mAh 5A 5A x 2 N/A

on page 15 for additional information.

EZ-PEAK LIVE DUAL • 9

Charging Traxxas iD NiMH Batteries

1. Plug the charger into an AC wall outlet, and then
connect the NiMH batter(ies) as shown

The charger will recognize the iD batter(ies)
and show you the charge settings.

NiMH with iD

2. Verify the charge settings

Confirm that the red NiMH LED is lit
for the connected NiMH batter(ies).
The Start button(s) will light blue
indicating that iD batter(ies) are

Battery Type

connected and ready to charge.

10 • EZ-PEAK LIVE DUAL

Start

3. Charging

Press and hold the Start button for 2
seconds. The charger will play a tone
and the green progress LED will flash,
indicating that charging has started.
The red charge progress LEDs will light
as the batter(ies) charge. Press the Start
button at any time to stop charging.
The charger will play a tone, indicating
that charging has been canceled.

Charging (flashing)

Charge Cycle Progress

4. Charge cycle complete

The charger will play a “charge complete”
tone to indicate charging is complete. The
alert tone will play 3 times and stop.

The EZ-Peak Live Dual will trickle charge
your NiMH batter(ies) at a minimum of
100mA for 12 hours after the charge
cycle is complete.

Charging Complete
(solid)

EZ-PEAK LIVE DUAL • 11

Charging Traxxas iD LiPo Batteries

1. Plug the charger into an AC wall outlet, and then

connect the LiPo batter(ies) as shown

The charger will recognize the iD batter(ies)
and show you the charge settings.

LiPo with iD

2. Verify the charge settings

Confirm that the green LiPo LED is lit for
the connected LiPo batter(ies). The Start
button(s) will light blue indicating that
iD batter(ies) are connected and

Battery Type

ready to charge.

12 • EZ-PEAK LIVE DUAL

Charge Mode
(the default is

Balance)

Start

3. Select LiPo charging mode

The default LiPo charge setting is Balance Charge. You can change the LiPo charge setting, if desired.

Storage Charge

Makes it easy to charge or discharge batteries to the proper storage
voltage. Use this mode whenever batteries will be stored unused for
more than 7 days.

Fast Charge

Fast charges your batteries without balancing the cells. Stops charging
when the batteries are fully charged or when the first cells reach peak
voltage. Depending on the batteries, this may reduce the charge time
by a few minutes.

WARNING: FIRE HAZARD!

The fast charge LiPo setting is for occasional use only. LiPo
batteries that become severely out of balance over time can

create a hazard if one or more cells are discharged below
the recommended safe voltage during use. See additional
warnings and precautions in the beginning of this manual.

Balance Charge (recommended)

Always balance charge your LiPo batteries for maximum capacity,
voltage, and battery life. This is the default setting for Traxxas iD
batteries. The EZ-Peak Live Dual performs a balance charge quickly and
efficiently.

EZ-PEAK LIVE DUAL • 13

4. Charging

Press and hold the Start button for 2
seconds. The charger will play a tone
and the green progress LED will flash,
indicating that charging has started.
The red charge progress LEDs will light
as the batter(ies) charge. Press the Start
button at any time to stop charging.
The charger will play a tone, indicating
that charging has been canceled.

Charging (flashing)

Charge Cycle Progress

5. Charge cycle complete

The charger will play a “charge complete”
tone to indicate charging is complete.
The alert tone will play 3 times and stop.

14 • EZ-PEAK LIVE DUAL

Charging Complete
(solid)

Charging Traxxas iD Batteries using MAXX Charge

MAXX Charge allows you to charge high capacity batteries at a faster charge rate
using the charger’s full power. Use this feature to charge your LiPo batteries at a
“2C” charge rate (up to 16 amps) (2C is 2 times the capacity; 4000 mAh x 2 = 8000
mAh or 8-amp charge rate). Charging priority is given to the right charger output
port once the MAXX Charge button is pressed;
the left charger output port remains active, but
will charge the connected battery at a decreased
charge rate.

Press the
flash for 3 seconds, and then turn solid green
to indicate MAXX Charge is active.
charging steps for Traxxas iD LiPo batteries.

Refer to the chart on page 9 to review the maximum
charge current for each channel when using MAXX
Charge. The MAXX Charge setting manages the
current to each channel to allow maximum available
charge current to flow to each channel. For example,
as the battery on the MAXX Charge channel nears
completion and requires less charge current, the
remaining available charge current is automatically
sent to the left channel (up to the maximum
allowable iD charge current).

MAXX Charge button. The button will

Follow the

EZ-PEAK LIVE DUAL • 15

Traxxas EZ-Peak Live Application

The EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod touch®, or Android™ device
and links to your charger via built-in Bluetooth®. The EZ-Peak Live App (available in the Apple
App Store℠ or on Google Play™) gives you access to additional features, such as a high-definition

graphical user interface, remote monitoring and alerts for up to 4 chargers, detailed live charging

information, and access to full manual controls (see Advanced Mode on page 19).

Remote monitoring via the
EZ-Peak Live App is not a substitute for being present to watch over and tend to batteries being charged.
Please see the warning about this on page 18.

Linking the App to the Charger

1. Plug the charger into an AC wall outlet. Open the EZ-Peak Live

App on your mobile device.

2. Press the Bluetooth® Link button on the side of the charger.

The blue LED will blink.

3. Within 10 seconds, tap the “Press Here to Connect” button in

the app.

Note:

4. The Bluetooth® icon in the status bar will turn blue and the

blue Bluetooth® LED on the side of the charger will glow solid.

5. The EZ-Peak Live Dual charger and the EZ-Peak Live App are

The EZ-Peak Live App is updated

frequently, and the actual screens may vary

from the images shown.

now paired. The charger and app will automatically connect
when the charger is powered up and the app is running.

Note: When the paired charger is selected using the EZ-Peak Live
App, the left or right App Live LED on the charger will glow solid
green to indicate which output port is active within the app.

16 • EZ-PEAK LIVE DUAL

Charging Traxxas iD NiMH or LiPo Batteries
using the EZ-Peak Live App

When EZ-Peak Live is connected, you have the ability to configure
the charger remotely from the app or you can use the buttons
on the charger. EZ-Peak Live Dual will not allow you to start the
charging process remotely via the app. It is important to verify
visually at the charger that the connected batter(ies) match the
charge mode indicated on the face of charger. Once your charge
settings are visually confirmed by you, press and hold the Start
button on the charger for 2 seconds to begin charging. Once
charging has started, you can view charge progress and stop the
charging process at any time from the app. When the charge
process is completed, the EZ-Peak Live App will play the charge
complete alert tone. These alerts can be adjusted in the app
settings. Follow the on-screen prompts to move through the
information screens provided in the app. If you have questions, tap
the Help button ? in the lower right of the app display.

Connected Chargers (up to 4)

iD-Only Safety Lock

iD Battery Specifications

The EZ-Peak Live App contains a passcode-protected safety lock that limits the charger to iD-only operation,
even when connected to the app on another iOS® or Android™ device. This feature allows the charger to be
locked so that inexperienced users (such as children) do not have access to manual settings for the charger and
the risks associated with using manual settings (see Warnings on page 2).

EZ-PEAK LIVE DUAL • 17

WARNING: FIRE HAZARD!

Never leave batteries unattended while charging. Remote monitoring via the EZ-Peak Live App
is not a substitute for being present to watch over and tend to batteries being charged. Batteries
being charged should always be visible and monitored in person in case there is an unexpected
problem that requires immediate attention.

Cell Voltage Checker

Charge Status

18 • EZ-PEAK LIVE DUAL

LiPo Charge Settings

WARNING! CAUTION! DANGER!

FIRE HAZARD!

IN ADVANCED MODE, THE USER SELECTS THE

BATTERY CHEMISTRY AND CHARGE MODE. THIS CREATES THE RISK OF FIRE
AND POSSIBLE INJURY TO YOURSELF AND OTHERS RESULTING FROM ACCIDENTALLY
CHOOSING TO CHARGE A LIPO BATTERY IN NIMH MODE. ALWAYS MAKE SURE TO SELECT
THE BATTERY TYPE THAT MATCHES THE CONNECTED BATTERY. ALSO, TO HELP PREVENT
ACCIDENTALLY SELECTING THE WRONG BATTERY TYPE, NEVER ATTEMPT TO CHARGE
LIPO BATTERIES WITH MISSING OR DAMAGED BALANCE CONNECTORS. IF YOU DO NOT
UNDERSTAND THE TERMINOLOGY USED IN THESE INSTRUCTIONS, KNOW WHAT TYPE OF
BATTERIES YOU HAVE, OR WHAT THIS WARNING MEANS, DO NOT USE ADVANCED
MODE; INSTEAD, CONTACT TRAXXAS FOR MORE INFORMATION.

Advanced Mode

Advanced Mode allows you to choose and configure the charge settings for the charger. Advanced Mode
is needed for charging batteries that are not equipped with iD technology. It is not possible to manually
configure your charge settings without the Traxxas EZ-Peak Live App connected to the charger.

1. Open the EZ-Peak Live App on your mobile device; plug the charger into an AC wall outlet,
and then connect the batter(ies) as shown

EZ-PEAK LIVE DUAL • 19

Advanced Mode (manual settings)

Advanced Mode must be enabled by the user.

Follow the on-screen prompts in the EZ-Peak Live App.

LiPo Only

NiMH battery LiPo battery

with balance plug connected

20 • EZ-PEAK LIVE DUAL

The EZ-Peak Live Dual charger is set by default to only charge
iD-equipped batteries. You must turn off iD-Only Mode on the
Advanced Charger Settings screen of the app to manually
configure the charger settings to charge non-iD batteries.

You can also turn on and set up the passcode-protected safety lock on
this same screen.

2. Use the EZ-Peak Live App to select the battery type,
battery capacity, charge rate, and charging mode
(LiPo only).

The Charge Settings Wizard takes you through the setup

process by asking you questions about the battery you are
charging.

Follow the instructions in the app.

in

the lower right of the app display for more detail.

Tap the Help button ?

Advanced Charger Settings

Charge Settings Wizard

EZ-PEAK LIVE DUAL • 21

Note: If the LiPo battery type is selected, a balance plug

connection is required by the charger and the EZ-Peak Live App
before displaying the LiPo charging options. Once the charger
detects a balance plug connection, the EZ-Peak Live App will
display the charging options and you can select your preferred
charging mode:

Balance, Fast, or Storage Charge

.

WARNING: FIRE HAZARD!

If the LiPo and NiMH LEDs alternately blink, then the

balance connector is either disconnected or damaged.
This creates the risk of fire or possible injury to youself
and others. DO NOT attempt to charge this LiPo battery.

Note that in Advanced Mode, once the charge settings are configured, the charge process cannot be
started from the app. Once the app sends these charge settings to the charger, the Start button(s) will
blink green indicating that it is ready for you to verify the connected batter(ies). Press and hold the Start
button(s) to begin the charging process.

22 • EZ-PEAK LIVE DUAL

3. Charging

Press and hold the Start button for 2
seconds. The charger will play a tone
and the green progress LED will flash,
indicating that charging has started.
The red charge progress LEDs will light
as the batter(ies) charge. Press the Start
button at any time to stop charging.
The charger will play a tone, indicating
that charging has been canceled.

Charging (flashing)

Charge Cycle Progress

4. Charge cycle complete

The charger will play a “charge complete”
tone to indicate charging is complete. The
alert tone will play 3 times and stop.

Charging Complete (solid)

EZ-PEAK LIVE DUAL • 23

Charger Error Codes

If the charger detects an error during the charge process, the charge status LEDs will ash an error code.

Error Code

Explanation Solution

The detected battery

type does not match the

charger conguration.

The battery or cell voltage

is too high or too low to

charge safely.

The charge cycle

timed out without

reaching the target

battery voltage.

The Traxxas battery iD

is detected but is not

readable by the charger
or the charger detected a
potential battery iD error.

a. Press the Battery iD Start/Stop button to return to charger conguration.
b. Verify that the battery matches the selected type (LiPo or NiMH).
c. Verify that the balance connector is plugged into the charger (if charging a non-iD LiPo

battery) or fully plugged into the charger (if charging an iD LiPo battery).

d. Inspect the battery for any signs of damage.

a. Verify that the balance connector is plugged into the charger (if charging a non-iD

LiPo battery).
b. Disconnect the battery and check its condition. Ensure it is within safe voltage levels.
c. Use the EZ-Peak Live App to verify charge settings.

Disconnect the battery and check its condition.

Contact Traxxas Customer Support.

The internal charger

temperature is too high.

24 • EZ-PEAK LIVE DUAL

Power o the charger and allow it to cool before attempting to charge the battery again.

Charger Error Codes (continued)

Error Code

Explanation Solution

Balance connector is

either disconnected or

damaged.

Disconnect the battery. DO NOT attempt to charge this battery. Contact Traxxas Customer
Support.

EZ-PEAK LIVE DUAL • 25

Warranty Information

Traxxas electronic components are warranted to be free from defects in materials and workmanship for a period
of 30 days from the date of purchase. Limitations: Any and all warranty coverage does not cover replacement
of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or
excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or
modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or transportation
of a defective component to us. This warranty is limited to the charger only and does not cover batteries, vehicles
and other accessories used in conjunction with the charger.

Traxxas Lifetime Electronics Warranty

After the expiration date of the warranty period, Traxxas will repair electronic components for a flat rate. Please
visit Traxxas.com/support for a current schedule of warranty costs and fees. The covered repairs are limited to
non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged
by intentional abuse, misuse, or neglect may be subject to additional charges. Traxxas liability, in no case, shall
be greater than the actual purchase price of this product. For replacement, product must be returned in brand
new condition, with packaging and itemized sales receipt.

Specifications are subject to change without notice. Every effort has been made to ensure the accuracy of
this Owner’s Manual and its contents; however, Traxxas cannot be held responsible for typographical or other
errors.

Apple, the Apple logo, iPhone, iPad, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Android and Google Play are trademarks of Google Inc.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Traxxas is under license. Other trademarks and trade
names are those of their respective owners.

26 • EZ-PEAK LIVE DUAL

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential
settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the
instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license
exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This
device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or
transmitter.

Declaration of Conformity for RED Directive

Traxxas LP hereby declares that this product is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available online at:

https://traxxas.com/compliance

Signed: ___________________________ Date: ___________________

March 22, 2018

EZ-PEAK LIVE DUAL • 27

180322 HKC17009-R00-EN

owner’s manual

6250 TRAXXAS WAY, McKINNEY, TX 75070

No part of this manual may be reproduced or distributed in print or electronic media without

the express written permission of Traxxas. Specifications are subject to change without notice.

1-888-TRAXXAS

Entire contents ©2018 Traxxas. All rights reserved.

Part #2973