Traulsen UC1LT, UC2LT Specifications

Project Quantity Item #

Model Specified: CSI Section 11400

Full Size Undercounter Freezers/

Self-Contained

INTELA-TRAUL

Equipped!

®

Model UC2LT

(shown with optional stainless steel top and casters)

Standard Product Features

• Stainless Steel Exterior Front and Doors

• Stainless Steel Interior

• INTELA-TRAUL® Microprocessor Control System

• Balanced, Self-Contained Refrigeration System Using R-404A

Mounted In A Readily Removable Power Pack

• Scroll Blower Type Evaporator Fan

• Field Rehingeable Stainless Steel Doors With Full Height

Vertical Handle

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Standard Door Hinging: UC1LT = Right, UC2LT = Left/Right

(other hingings available)

• Stainless Steel Breaker Caps

• Two Chrome Plated Adjustable Shelves Per Door,

Supported On Shelf Pins (installed at the factory)

• Automatic Condensate Evaporator

• Hot Gas Evaporator Defrost

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Metal Door Liner

• Controllable Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Six (6) 6" High Adjustable Stainless Steel Legs

• One Year Parts And Labor Warranty

• Two Year Control Warranty (parts and labor)

• Five Year Compressor Warranty

One & Two Door Models, 32" Deep

UC

SERIES

Stainless Front

& Interior

Traulsen's UC Series full size undercounter freezer models are designed for
use with most applications, combining the advantages of modular
flexibility with ease of maintenance. They are built to perform, their heavy
duty construction, quality components and innovative design are all intended
to provide a high quality, durable product you can depend upon.

They meet the needs of today's foodservice operator by providing assured
product holding temperatures, maximized storage capacity and features that
assist with HACCP compliance, making them an excellent value. Each is
supplied standard with such high quality features as balanced refrigeration
systems, microprocessor controls, communications ability and stainless steel
front and interior construction. Additionally, they include a removable power
pack,and field rehingeable doors, making them ideal for long term use where
reorganizing the work area in the future may require different door swings or
power pack orientation. In order to best suit your application they also offer
a wide range of optional accessories to choose from.

1-Door Freezer Model UC1LT
2-Door Freezer Model UC2LT

Options & Accessories

• Stainless Steel Exterior Finished Back

• Stainless Steel Exterior Sides

• 16 Gauge Flat Stainless Steel Top With Bullnose Front

• 16 Gauge Flat Stainless Steel Top With 4" High Backsplash

• 16 Gauge Stainless Steel Top w/Drip Guard (marine) Edge

• Cabinet Length Extension Sections, Available In

3", 6", 9", 12" and 15" Sizes

• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• Universal Type Tray Slides To Accommodate either (1)
18" x 26", (2) 12" x 20" or (2) 14" x 18" Sheet Pans,
Adjustable To 4" O.C.

• Additional Chrome Plated Shelves

• Stainless Steel Shelves In Lieu of Standard Chrome Plated

• Export 220/50/1 Voltage

• Power Pack Relocated To Right

• Door Lock(s)

• Set of 6" High Casters In Lieu of Legs

• Set of 4-5/8" High Casters In Lieu of Legs

• 4-1/2" High Stainless Steel Base In Lieu of Legs

• Two Year Service/Labor Warranty Available

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

Approval: ___________________________________

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

SECTION

2-2

Project Quantity Item #

Model Specified: CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one-piece louver assembly and doors are constructed of 20
gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed
of stainless steel. The exterior cabinet sub-top, sides, back and bottom are
constructed of heavy gauge aluminized steel. A set of adjustable 6" high stainless
steel legs are included.

Doors are field reversible, and equipped with a gasket protecting metal door pan and
guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay
open feature at 120 degrees. A full height vertical handle is recessed in the door,
eliminating protrusion into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

Interior

Standard interior arrangements include two (2) chrome plated wire shelves per door,
mounted on shelf pins. Recommended load limit per shelf should not exceed 225
lbs. Optional tray slides may be purchased in combination with, or in lieu of these.
Both standard and optional interior arrangements are completely installed at the
factory.

DIMENSIONAL DATA UC1LT UC2LT

Net Capacity cu. ft. 8.6 (244 cu l) 18.8 (533 cu l)

Length Overall in. 421⁄2 (108.0 cm) 691⁄2 (176.5 cm)

Depth - Cabinet Only in. 32 (81.3 cm) 32 (81.3 cm)

Depth - with Door Open 90°587⁄16 (148.4 cm) 587⁄16 (148.4 cm)

Depth - Overall in. 341⁄4 (87.0 cm) 341⁄4 (87.0 cm)

Height - Overall on 6" Legs in. 34 (86.4 cm) 34 (86.4 cm)

Net Weight-uncrated lbs.

1

350 (159 kg) 400 (181 kg)

Number of Shelves 2 4

Shelf Area sq. ft. 8.6 (2.6 sq. m.) 18.7 (5.7 sq. m.)

ELECTRICAL DATA

Voltage 115/60/1 115/60/1

Feed Wires with Ground 3 3

Full Load Amperes 9.3 9.3

REFRIGERATION DATA

Refrigerant R-404A R-404A

BTU/HR - HP

NOTE: Figures in parentheses reflect metric equivalents.
1= For shipping weights and dimensions please refer to spec sheet 12-4.
2= Based on a 90 degree F ambient and -15 degree F evaporator. For information on

remote models, please refer to spec sheet 12-2.

2

2700 (1⁄

NOTES

4 HP

) 2700 (1⁄

4 HP

)

Refrigeration System

The self-contained, balanced refrigeration system using R-404A refrigerant is
conveniently located within a removable power pack. It features a hot gas
evaporator defrost, thermostatic expansion valve, air-cooled hermetic compressor,
plenum effect blower coil, large, high humidity evaporator coil located outside the
food zone and an electric condensate evaporator. A 9' cord and plug is provided.
Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant INTELA-TRAUL
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self­contained models only) are provided standard. An optional 2
and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.

®

microprocessor control system is

nd

year extended parts

Elevation - UC1LT Elevation - UC2LT

Plan - UC2LTPlan - UC1LT

Equipped With One NEMA 5-15 P Plug

NOTE: When ordering please specify: Voltage, Hinging, Options and any additional
warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35775 (revised 1/07)

TRAULSEN

SECTION

2-2

4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Section - All Models

NOTE: An optional stainless steel worktop is required on
full size undercounter models being used to support
equipment weighing in excess of 100 lbs. or producing
heat in excess of 140°F to the top surface.