
Project Quantity Item #
Model Specied: CSI Section 11400
-15°F Reach-In Freezer Models/
Self-Contained
Includes Traulsen's patented
INTELA-TRAUL® control
Model RSL232NUT-FHS
Standard Product Features
• Stainless Steel Exterior & Interior
• INTELA-TRAUL® Microprocessor Control System
• Balanced, Self-Contained Refrigeration System Using
R-404A Refrigerant
• Full or Half Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Standard Door Hinging: 232N = Left/Right,
332N = Left/Right/Right (other hingings available)
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Three Wire Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
• Automatic Bottom Mounted Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Gasket Protecting Stainless Steel Door Liner
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached (two section models only)
• Set of Four (4) 6" High Adjustable Stainless Steel Legs
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
Two & Three Section Reach-In Models - 32" Deep
2-Section Full Length Door Model RSL232NUT-FHS
3-Section Full Length Door Model RSL332NUT-FHS
R
SERIES
Stainless Exterior
& Interior
For those applications, such as ice cream storage, which require even
colder operating temperatures, Traulsen offers a line of two and three
section reach-in freezer models which operate in the -15° range. They
are supplied standard with all of Traulsen's top of the line R-Series
features, such as next generation INTELA-TRAUL® controls, stainless
steel exterior/interior construction, factory installed interior arrangements,
and self-closing doors with a convenient stay open feature.
Please note however that actual ice cream storage and consistency
characteristics vary due to the wide variety of ice cream products on the
market. Selection of any freezer for these applications should be based
upon the actual operating temperature required, or determined during
previous experience with the specic product to be stored within.
2-Section Half Length Door Model RSL232NUT-HHS
3-Section Half Length Door Model RSL332NUT-HHS
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Door(s)
• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
• No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Steam
Table Pans, Adjustable To 2" O.C.
• No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans (chrome rod type, equips 1/2 section)
• Universal Type Tray Slides To Accommodate Either (1)
18" x 26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam
Table Pans, Adjustable To 4" O.C.
• Additional Wire Shelves
• Locking Hasps (padlocks supplied by others)
• Stainless Steel Shelves• Kool Klad Exterior Laminate
Decor
• Set of Four (4) 6" High Casters In Lieu of Legs
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• 6" High Stainless Steel Kickplate (for use with standard legs)
• Prison/Correctional Facilities Options
• Remote Applications (see spec sheet TR35837 for more
details)
• Two Year Service/Labor Warranty Available
Listed by Underwriters Laboratories Inc.,
to U.S. and Canadian safety standards and
Listed by NSF International.
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Approval: __________________________________

Project Quantity Item #
Model Specied: CSI Section 11400
Specications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 nish. Cabinet interior and door liners are
constructed of stainless steel. The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high
stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal,
glide hinges with stay open feature at 120 degrees. Hinges include a concealed
switch to automatically activate the interior incandescent lighting. Guaranteed for
life, work ow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA RSL232NUT RSL332NUT
Net capacity cu. ft. 46.0 (1303 cu l) 69.5 (1969 cu l)
Length - overall in. 521⁄8 (132.4 cm) 765⁄16 (193.8 cm)
Depth - overall in. 35 (88.8 cm) 35 (88.8 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm)
Depth - with door open 553⁄4 (141.6 cm) 553⁄4 (141.6 cm)
90 degrees in.
Clear door width in. 211⁄8 (53.6 cm) 211⁄8 (53.6 cm)
Clear half-door height in. 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)
Clear full-door height in. 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)
Height - overall on 6" legs 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
Shelf area sq. ft. 34.6 (3.21 cm) 51.9 (4.82 cm)
Net Wt. lbs. 700 (318 kg) 995 (451 kg)
ELECTRICAL DATA
Voltage 208-230/115/60/1 208-230/115/60/1
Feed wires with Ground 4 4
Full load amperes 10.2 18.4
REFRIGERATION DATA
Refrigerant R-404A R-404A
BTU/HR H.P.1 4130 (1 HP) 2 x 5560 (3⁄4 HP)
NOTES
NOTE: Figures in parentheses reect metric equivalents.
1= Based on a 90 degree F ambient and -20 degree F evaporator.
2= For approximate remote weights deduct 40 lbs. from respective net or gross
weight. For other information on remote models, please refer to spec sheet
TR35875.
Refrigeration System
The fast-freezer includes an auxiliary fan for increased air circulation and a boost in
refrigeration so the cabinet can operate in the -10 to -20 degree F range. Increased
refrigeration is accomplished by the use of a 1 HP in lieu of a 3/4 HP compressor on
a two section narrow model. On a 3-section narrow door model, we supply (2) 3/4 HP
compressors in lieu of a (1) 1 HP compressor.
These freezer models contain mullion coolers with an auxiliary fan for increased
air flow throughou t the interi or of the ca binet. This affo rds maximum heat
transfer between the air and product, resulting in faster freezing.
Controller
The easy to use water resistant INTELA-TRAUL® microprocessor control system
is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required
for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockout Feature and an RS485 data
port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door
Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and
Power Supply Interruption.
Interior
Standard interior arrangements include three (3) wire shelves per section, mounted
on shelf pins. Shelves are full-width, and do not have any large gaps between them
requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf
should not exceed 225 lbs. Optional tray slides may be purchased in combination
with, or in lieu of these. Both standard and optional interior arrangements are
completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a ve year compressor warranty
(self-contained models only) are provided standard. An optional 2nd year extended
parts and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.
Equipped With One NEMA L14-20P Plug
(two section model only)
Full load amps and plug style may vary depending on electrical options
chosen and condensing unit employed.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and
any additional warranties. For fast order entry: Fax 1 (800) 765-8728.
Continued product development may necessitate specication changes without notice.
Part No. TR35807 (revised 4/10)
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
In order to assure optimum performance, the condensing unit MUST have an adequate supply
of air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air ow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
REQUIRED CLEARANCES