Traulsen G10005P, G20007P, G10003P, G10014P, G20014P User Manual

Project Quantity Item #

Model Specified: CSI Section 11400

G-Series Pass-Thru Solid Door

Refrigerators/Self-Contained

Equipped with an
easy to use
microprocessor
control!

Model G20004P

Model G10012P

Standard Product Features

• High Quality Stainless Steel Exterior Front and Doors

• Corrosion Resistant Anodized Aluminum One-Piece Sides

• Durable Anodized Aluminum Interior

• Microprocessor Control With LED Temperature Readout

•Top-Mounted, Balanced, Self-Contained Refrigeration System

• Large High Humidity Evaporator Coil Outside The Food Zone

• Load-Sure Guard Protects Against Improper Loading

• Full or Half Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handles

• Automatically Activated Incandescent Lights

• Damage Resistant Stainless Steel Breaker Caps

• Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)

• Energy Saving Automatic Non-Electric Condensate Evaporator

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Anodized Aluminum Door Liner

• Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Four (4) 6" High Casters With Locks

• One Year Parts And Labor Warranty

• Five Year Compressor Warranty

One & Two Section Models, 32" Deep

Aside from their anodized aluminum side and interior finishes,

G

SERIES

Stainless Steel
Front & Door(s)

Traulsen’s G-Series "Dealer's Choice" models meet or exceed the
standard specifications and performance of most other brands top
tier product offerings. Reliable, energy efficient, and durable, with
large individual storage capacities, the high quality G-Series line-up
includes a wide range of one and two section pass-thru refrigerator
models, built in our most popular footprints. They are available with
either full or half height doors, and the added convenience of a
variety of different door hingings to choose from. In addition, each
also includes a number of user-friendly features, making them one
of the best overall equipment values in Foodservice today, and the
right fit for nearly any commercial application.

AVAILABLE MODELS

*Door hinging when viewed from that side.

Single Section Models
Control Side Other Side
Model # Door Hinging Hinging*

G10002P Half Right Right
G10003P Half Right Left
G10004P Half Left Left
G10005P Half Left Right
G10012P Full Right Right
G10013P Full Right Left
G10014P Full Left Left
G10015P Full Left Right

Control Side Other Side

Model # Door Hinging Hinging*

G20004P Half Left/Right Left/Right
G20005P Half Left/Left Left/Left
G20006P Half Right/Left Right/Left
G20007P Half Right/Right Right/Right
G20014P Full Left/Right Left/Right
G20015P Full Left/Left Left/Left
G20016P Full Right/Left Right/Left
G20017P Full Right/Right Right/Right

Two Section Models

Optional Accessory Kits

• Additional Epoxy Coated Shelves*

• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)

• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.

• Chrome Plated Shelves* (for use in lieu of standard shelving)

• 6" High Adjustable Legs (for use in lieu of standard casters)

•Two Year Service/Labor Warranty Available

*Please refer to spec sheet 4-7 for

optional accessory kit details

NOTE: All optional accessory kits are shipped separately for

later installation by others at the jobsite.

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Approval: __________________________________

SECTION

4-5

Project Quantity Item #

Model Specified: CSI Section 11400

Elevation
G10002P
G10003P

Elevation
G20007P

Elevation
G10004P
G10005P

Elevation
G10012P
G10013P

Elevation
G20014P

Elevation
G10014P
G10015P

Elevation
G20004P

Elevation
G20015P

Elevation
G20005P

Elevation
G20016P

Elevation
G20006P

Elevation

G20017P

G10002P
G10012P

SECTION

4-5

Plan

Plan
G10003P
G10013P

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

G10004P
G10014P

Plan

Plan
G10005P
G10015P

Project Quantity Item #

Model Specified: CSI Section 11400

Plan
G20004P
G20014P

Plan
G20005P
G20015P

Plan
G20006P
G20016P

Plan
G20007P
G20017P

Section View

All Half Height Door Models

Section View

All Full Height Door Models

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

SECTION

4-5

Project Quantity Item #

Model Specified: CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and doors are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

1-Section Models 2-Section Models

Net capacity cu. ft. 25.6 (719 cu l) 48.8 (1371 cu l)
Length - overall in. 297⁄8 (75.9 cm) 521⁄8 (132.4 cm)
Depth - overall in. 3715⁄16 (96.4 cm) 3715⁄16 (96.4 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm)
Depth - doors open 90° in. 833⁄8 (211.8 cm) 833⁄8 (211.8 cm)
Clear door width in. 211⁄8 (53.6 cm) 211⁄8 (53.6 cm)
Clear half-door height in. 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)
Clear full-door height in. 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)
Height-overall on 6" casters

831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
No. Standard Shelves 3 6
Shelf area sq. ft.

1

18.8

(1.75 sq m)

34.6

(3.21 sq m)

ELECTRICAL DATA

Voltage 115/60/1 115/60/1
Feed wires with Ground 3 3
Full load amperes 4.7 7.3

REFRIGERATION DATA

Refrigerant R-134a R-134a
BTU/HR H.P.

2

1520 (1⁄4 HP) 2410 (1⁄3 HP)

SHIPPING DATA

Length - crated in. 35 (89 cm) 63 (160 cm)
Depth - crated in. 43 (109 cm) 43 (109 cm)
Height - crated in. 831⁄2 (212 cm) 831⁄2 (212 cm)
Volume - crated cu. ft. 71 (2011 cu l) 131 (3711 cu l)
Net Wt. lbs. 305 (138 kg) 450 (204 kg)
Gross Wt. lbs. 395 (179 kg) 590 (268 kg)

NOTE: Figures in parentheses reflect metric equivalents.
1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on

the cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet

13-2.

NOTES

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, large, high humidity evaporator coil located outside the food
zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.

Interior

Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self­contained models only) are provided standard. An optional 2
and labor warranty is also available.

nd

year extended parts

Equipped With One NEMA 5-15 P Plug

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35885 (revised 6/08)

SECTION

4-5

REQUIRED CLEARANCES

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com