SATA II 3Gb/s SSD
• Super slim thickness of 7mm
• Fully compatible with devices and OS that support the
SATA II 3Gb/s standard
• Non-volatile Flash Memory for outstanding data retention
• Built-in ECC (Error Correction Code) functionality and
wear-leveling algorithm ensures reliable data transfer
• Advanced Power Shield
• Advanced Garbage Collection
• Hardware Purge and Write Protect
• Supports Trancend’s SSD Scope Pro
SSD630 Benefits
Transcend’s SSD630 is a SATA II 3Gb/s SSD device built with high performance, quality Flash Memory
assembled on a printed circuit board. It features cutting-edge technology to enhance product life and
data retention. Designed with multitasking power users in mind, the SSD630 is capable of running
many demanding system applications, including specialized multimedia computing and advanced
gaming. As a result, SSD630 is the perfect storage device for industrial PCs, Laptops, gaming systems,
and handheld devices.
Enhanced Performance
SSD630 is able to offer incredible transfer speeds of up to 260MB/s read and 225MB/s write. This fast
speed translates into significantly faster system boot up, application launch speed, data transfers, and
overall system responsiveness. Moreover, support for Native Command Queuing (NCQ), increases the
performance and efficiency of the SSD630 by optimizing the order in which received read and write
commands are executed.
Applications
The SSD630 boasts a super slim thickness of just 7mm to address the size limitations of today’s modern
Ultrabooks, notebooks, and other thin and light form factor devices. The 7mm SSD630 uses the same
SATA connector used on a 2.5” hard disk drive (HDD) thus is a great update for all computers even the
industrial PCs. SSD630 not only provides resistance from shock and vibration, but also offers low power
consumption and cool, silent operation to greatly benefit notebook users with increased efficiency and
longer battery runtime. SSD630 also supports hardware purge which may quickly erase all data with a
push of a button or write protect which may prevent any data from being modify.
Built-In Reliability
SSD630 is built with advanced power shield which prevent the SSD from damage during sudden power
off or power failure. SSD 630 also utilizes advanced garbage collection algorithm which maintains SSD
high performance even after long time operation. To further increase the lifespan of the SSD, built-in
wear-leveling and Error Correction Code (ECC) ensure reliable data transfer, while full support of the
S.M.A.R.T. command helps detect possible hard drive failures before they occur.
Placement
Specifications
Environmental Specifications
0
℃ to 70 ℃
Operating Temperature
Storage Temperature
Operating
Humidity
Non-Operating
Physical Specification
Form Factor
- 40 ℃ to 85
(Optional)
- 40
0% to 95%
(Non-condensing)
0% to 95%
(Non-condensing)
2.5-inch HDD
℃ to 85 ℃
℃
Dimensions
Side Millimeters Inches
A
B
C
99.80 ± 0.25 3.929 ± 0.01
69.80 ± 0.25 2.748 ± 0.01
7.00 ± 0.15 0.276 ± 0.006
Storage Capacities
Input Voltage
Weight
Connector
16 GB to 256 GB
5V ± 5%
48g
SATA 7+15 pins combo
connector
Performance
Model P/N
Sequential
Read*
Sequential
Write*
Random Read
(4KB QD32)*
Random Write
(4KB QD32)*
Random Read
Random Write
(4KB QD32)**
IOPS
TS16GSSD630
TS32GSSD630
TS64GSSD630
TS96GSSD630
TS128GSSD630
TS256GSSD630
Note: Maximum transfer speed recorded
* 25 ℃, test on ASUS P8H77-M Pro + Intel Core i5, 2GB, Windows
1000MB, unit MB/s
** Random read/write performance based on IOmeter2006 with 4K file size and queue depth of 32 at full size LBA address, unit IOPs
*** The recorded performance is obtained while the SSD is not operating as an OS disk
120 20 65 15 13700 2100
240 40 70 40 14400 3600
260 85 70 65 14600 4100
225 120 70 70 14200 4100
255 150 70 70 14800 4600
260 225 60 15 12600 2700
®
7 with AHCI mode, benchmark utility Crystal DiskMark (version 3.0), copied file
IOPS
(4KB QD32)**
Power Consumption
Model P/N / Power Consumption Typical (mA)
READ 121
TS16GSSD630
TS32GSSD630
TS64GSSD630
TS96GSSD630
WRITE 207
IDLE 153
READ 160
WRITE 237
IDLE 154
READ 272
WRITE 278
IDLE 165
READ 301
WRITE 422
Reliability
Data Reliability
MTBF
Endurance
(TeraBytes Written)
*Note: Based on JEDEC JESD218 & 219A specification, Client
Application Class. And based on the following scenario: Active use:
o
C, 8hrs/day; Retention use: 30oC 1year
40
Supports 40 bits per 1024 bytes
1,000,000 hours
16G: 17.0 (TB)
32G: 35.0 (TB)
64G: 76.0 (TB)
96G: 110.0 (TB)
128G: 175.0 (TB)
256G: 275.0 (TB)
IDLE 152
READ 305
TS128GSSD630
WRITE 452
IDLE 150
READ 332
TS256GSSD630
WRITE 569
IDLE 161
*Tested reads/writes with IOmeter running sequential and idle mode
Vibration
Operating
Non-Operating
*Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine
wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5hrs.
5.0G(peak-to-peak), 5 - 800Hz
20.0G(peak-to-peak), 5 - 800Hz
Shock
Operating
Non-Operating
1500G, 0.5ms
1500G, 0.5ms
SATA II 3Gb/s Industrial SSD
• Super slim thickness of 7mm
• Fully compatible with devices and OS that support the
SATA II 3Gb/s standard
• Industrial Wide Temperature (- 40 ℃ to 85 ℃)
Non-volatile Flash Memory for outstanding data retention
• Built-in ECC (Error Correction Code) functionality and
wear-leveling algorithm ensures reliable data transfer
• Advanced Power Shield
• Advanced Garbage Collection
• Hardware Purge and Write Protect
• Supports Trancend’s SSD Scope Pro
Industrial SSD630 Benefits
Transcend’s Industrial SSD630I is a SATA II 3Gb/s SSD device built with high performance, quality
Flash Memory assembled on a printed circuit board. It features cutting-edge technology to enhance
product life and data retention. Designed with multitasking power users in mind, the SSD630I is
capable of running many demanding system applications, including specialized multimedia computing
and advanced gaming. As a result, SSD630I is the perfect storage device for industrial PCs, Laptops,
gaming systems, and handheld devices.
Enhanced Performance
SSD630I is able to offer incredible transfer speeds of up to 260MB/s read and 225MB/s write. This fast
speed translates into significantly faster system boot up, application launch speed, data transfers, and
overall system responsiveness. Moreover, support for Native Command Queuing (NCQ), increases the
performance and efficiency of the SSD630 by optimizing the order in which received read and write
commands are executed.
Applications
The SSD630I boasts a super slim thickness of just 7mm to address the size limitations of today’s modern
Ultrabooks, notebooks, and other thin and light form factor devices. The 7mm SSD630I uses the same
SATA connector used on a 2.5” hard disk drive (HDD) thus is a great update for all computers even the
industrial PCs. SSD630I not only provides resistance from shock and vibration, but also offers low power
consumption and cool, silent operation to greatly benefit notebook users with increased efficiency and
longer battery runtime. SSD630I also supports hardware purge which may quickly erase all data with a
push of a button or write protect which may prevent any data from being modify.
Built-In Reliability
SSD630I is built with advanced power shield which prevent the SSD from damage during sudden power
off or power failure. SSD630I also utilizes advanced garbage collection algorithm which maintains SSD
high performance even after long time operation. To further increase the lifespan of the SSD, built-in
wear-leveling and Error Correction Code (ECC) ensure reliable data transfer, while full support of the
S.M.A.R.T. command helps detect possible hard drive failures before they occur.
Placement
Specifications
Environmental Specifications
℃ to 85 ℃
Operating Temperature
Storage Temperature
Operating
Humidity
Non-Operating
- 40
℃ to 85 ℃
- 40
0% to 95%
(Non-condensing)
0% to 95%
(Non-condensing)
Physical Specification
Form Factor
2.5-inch HDD
Storage Capacities
16 GB to 256 GB
Dimensions
Side Millimeters Inches
A
B
C
99.80 ± 0.25 3.929 ± 0.01
69.80 ± 0.25 2.748 ± 0.01
7.00 ± 0.15 0.276 ± 0.006
Input Voltage
Weight
Connector
5V ± 5%
48g
SATA 7+15 pins combo
connector
Performance
Model P/N
Sequential
Read*
Sequential
Write*
Random Read
(4KB QD32)*
Random Write
Random Read
(4KB QD32)*
(4KB QD32)**
IOPS
TS16GSSD630I
TS32GSSD630I
TS64GSSD630I
TS128GSSD630I
TS256GSSD630I
Note: Maximum transfer speed recorded while the SSD is not operating as an OS disk
* 25 ℃, test on ASUS P8H77-M Pro + Intel i5, 2GB, Windows
** Random read/write performance based on IOmeter2006 with 4K file size and queue depth of 32 at full size LBA address, unit IOPs
Power Consumption
Model P/N / Power Consumption Typical (mA)
120 20 65 15 13700 2100
240 40 70 40 14400 3600
260 85 70 65 14600 4100
255 150 70 70 14800 4600
260 225 60 15 12600 2700
®
7 AHCI mode, Crystal DiskMark (version 3.0), copied file 1000MB, unit MB/s
Reliability
Data Reliability
Supports 40 bits per 1024 bytes
IOPS
Random Write
(4KB QD32)**
READ 121
TS16GSSD630I
WRITE 207
IDLE 153
READ 160
TS32GSSD630I
WRITE 237
IDLE 154
READ 272
TS64GSSD630I
WRITE 278
IDLE 165
READ 305
TS128GSSD630I
WRITE 452
IDLE 150
READ 332
TS256GSSD630I
WRITE 569
IDLE 161
*Tested reads/writes with IOmeter running sequential and idle mode
MTBF
Endurance
(TeraBytes Written)
1,000,000 hours
16G: 17.0 (TB)
32G: 35.0 (TB)
64G: 76.0 (TB)
128G: 175.0 (TB)
256G: 275.0 (TB)
*Note: Based on JEDEC JESD218 & 219A specification, Client
Application Class. And based on the following scenario: Active use:
o
C, 8hrs/day; Retention use: 30oC 1year
40
Vibration
Operating
Non-Operating
*Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine
wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5hrs.
5.0G(peak-to-peak), 5 - 800Hz
20.0G(peak-to-peak), 5 - 800Hz
Shock
Operating
1500G, 0.5ms
Non-Operating
1500G, 0.5ms
Loading...