Transcend Computer Drive, StoreJet 25 User Manual

User’s Manual
Portable Hard Drives
StoreJet® 25
Table of Contents
Introduction︱︱ ......................................................................................1
Features︱︱ ............................................................................................1
System Requirements︱︱ .....................................................................2
Safety Precautions︱︱...........................................................................2
General Use................................................................................................................... 2
Backing up Data............................................................................................................ 2
Transporting.................................................................................................................. 2
Power............................................................................................................................. 2
Reminders..................................................................................................................... 2
Connecting to a Computer︱︱ ..............................................................3
One Touch Backup︱︱ ..........................................................................6
Disconnecting from a Computer︱︱ ....................................................7
Windows

...................................................................................................................... 7
Mac® OS......................................................................................................................... 7
Linux®............................................................................................................................ 8
Formatting the Hard Drive︱︱...............................................................9
Windows® XP................................................................................................................. 9
Windows

7/Vista........................................................................................................ 10
Mac® OS....................................................................................................................... 13
Linux®.......................................................................................................................... 15
Troubleshooting︱︱.............................................................................16
Specifications︱︱.................................................................................18
Recycling & Environmental Considerations︱︱ ...............................19
Three-year Limited Warranty︱︱ ........................................................20
1
Introduction
Congratulations on purchasing Transcend’s StoreJet 25. This rugged, ultra-portable, high speed USB storage device is the perfect data management system for uploading, downloading, storing and transferring your data. The compact StoreJet 25 is ideal for carrying your files, folders, documents, photos, music and videos. In addition, the StoreJet 25 comes with very useful software* that can increase your mobile productivity. This User’s Manual is designed to help you get the most from your new device. Please read it in detail before using the StoreJet 25.
Note:
1. The SJ25 comes bundled with Transcend Elite, which enables the StoreJet’s One Touch auto-backup button (available on select StoreJet models only). See the Elite Software User’s Manual for details. The Transcend Elite software is also available for download at www.transcend.com.tw/elite.
2. The StoreJet Format Utility only works in Windows—Please see the “Formatting the Hard
Drive” section of this manual for more information.
3.
To use the Mac OSX Time Machine function, please format the StoreJet drive to HFS+ first — (see “Formatting the Hard Drive – Mac OS”)
Features
Advanced internal hard drive suspension system Extra-large storage capacity Sleek ultra portable design Easy Plug and Play operation – no drivers required USB powered – no external adapter necessary Power saving sleep mode One Touch Auto-Backup button (available only on select StoreJet models) Includes Transcend Elite™ backup and security software LED power / data transfer activity indicator
2
System Requirements
Desktop or notebook computer with a working USB port. One of following Operating Systems:
USB 3.0 Models:
USB 2.0 Models:
Windows XP
Windows XP
Windows Vista
Windows Vista
Windows 7
Windows 7
Linux Kernel 2.6.31+
Linux Kernel 2.4.2+
Mac OS X 10.5+ (only USB 2.0 supported)
Mac OS 9+
Safety Precautions
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
Carefully unpack the contents of the StoreJet 25 package.
During operation, avoid exposing your StoreJet 25 to extreme temperatures above 55, or below 5.
Do not drop your StoreJet 25.
Do not allow your StoreJet 25 to come in contact with water or any other liquids.
Do not use a damp/wet cloth to wipe or clean the exterior case.
o Do not store your StoreJet 25 in any of the following environments: Direct
sunlight
o Next to an air conditioner, electric heater or other heat sources o In a closed car that is in direct sunlight o In an area with strong magnetic fields or excessive vibration
If your Windows computer will not boot while StoreJet 25 is connected, please disconnect the StoreJet 25 to your computer first and connect the StoreJet 25 after starting Windows. Otherwise, refer to your computer's manual and change the BIOS settings to instruct the computer to boot from a different device.
Backing up Data
Transcend does NOT take any responsibility for data loss, or damage during operation. If you decide to store data on your StoreJet 25 we strongly advise that you
regularly backup the data to a computer, or other storage medium.
2
Transporting
Do not pack the StoreJet 25 into luggage without proper padded support. Other items in your luggage may damage the drive during travel if it does not have proper protection.
Avoid squeezing or compressing the StoreJet 25.
Do not place objects on top of your StoreJet 25.
Power
The StoreJet gets its power directly from your computer’s USB port. However, the power supplied by the USB ports on some older computers does not meet the stable 5V DC power requirements of the StoreJet. If your StoreJet does not function properly upon connecting it to your computer, please plug BOTH ENDS of the USB Y-cable into your computer.
Both ends of the USB Y-cable should be connected to provide ample power to the StoreJet
The Power Cable can provide additional power for the StoreJet 25 if necessary (SJ25M3 / SJ25D3)
Use only the USB cable that came with the StoreJet 25 to connect it to a computer, and always ensure that the cable you are using is in good condition. NEVER use a cable that is frayed or damaged.
Ensure nothing is resting on the USB cable and that the cable is not located where it can be tripped over or stepped on.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove the StoreJet from your computer.
3
Connecting to a Computer
1.
Plug the small end (1) of the USB cable into the StoreJet 25.
2.
Plug BOTH large ends (2) and (3) of the USB cable into an available USB 2.0 or USB 3.0 port on your desktop or notebook computer.
NOTE: Always plug both large ends of the Y-cable into your computer. If only one
USB port is available, please connect the data transfer end (2) of the Y-cable (compatibility not guaranteed).
(SJ25M3 / SJ25D3)
USB Cable
Power Connector
Micro / Mini USB Connector
USB 2.0 / 3.0 Connector
4
3.
A new Local Disk drive with a newly-assigned drive letter will appear, and a Removable Hardware icon will appear on the Windows System Tray. The StoreJet 25’s internal hard drive comes pre-formatted to FAT32, which is compatible with most computer systems, including Windows, Mac, Linux, and more.
Computers running Windows and Mac OS will automatically detect and install the StoreJet 25. To use USB 3.0, please ensure your computer has all necessary USB 3.0 drivers installed, and make sure you plug the USB Cable into the correct port on your computer (USB 3.0 ports are usually color-coded to differentiate them from USB 2.0)
Linux users may have to configure the StoreJet 25 manually. To do this, first create a directory for the StoreJet 25 (Example: mkdir /mnt/storejet). Then, mount the StoreJet 25 (Example: mount –a –t msdos /dev/sda1 /mnt/Storejet)
Loading...
+ 16 hidden pages